midi-sama Posted June 15, 2014 Share Posted June 15, 2014 Hi ! You tried kernel in the post #5933 ? OMG it WORKED , now the only missing part is the ATI HD2600XT :/ can't get it to work BUT YEAH THANKS A LOT Link to comment Share on other sites More sharing options...
mrjayviper Posted June 15, 2014 Share Posted June 15, 2014 Hello. I have created my bootable USB using myhack and the 10.9.3 as download from the AppStore. Anyway, I have tried rc6 and rc7 FX kernels and have replaced System and Sandbox KEXTs. In both cases, it results in a blank screen (my monitor says power saving mode). I'm not sure how to extract the dump the screen so I took a video. from what I can see the last 4 entries before the screen goes blank is probe start Built-in decrypter used [IOBluetoothHCIController][start] - completed I am using 10.9.2 right now and the only KEXTs I needed to replace are the ones I mentioned above. I am using chameleon (like what I used in 10.9.2) and used the flags "-f -v npci=0x2000". Any ideas what could be wrong? thanks very much in advance. ps. my setup is in my sig. edit1: I tried installing without using patched KEXTs and still the same results and error. edit2: I used myhack to create the 10.9.2 USB installer and that works fine. Link to comment Share on other sites More sharing options...
tragediana150 Posted June 15, 2014 Share Posted June 15, 2014 (edited) Hello. I have created my bootable USB using myhack and the 10.9.3 as download from the AppStore. Anyway, I have tried rc6 and rc7 FX kernels and have replaced System and Sandbox KEXTs. In both cases, it results in a blank screen (my monitor says power saving mode). I'm not sure how to extract the dump the screen so I took a video. from what I can see the last 4 entries before the screen goes blank is probe start Built-in decrypter used [IOBlouetoothHCIController][start] - completed Paste the Device and Vendor ID to you APGM.kext and repair permissions. (and change your SMBios.plist for proper one - the one, in which you paste ID's of your card) If this will not work, download the graphics kexts from Mavericks DP8 and paste them to your S/L/E folder and reapair premissions. (search these kext on our forum) Don't use GraphicsEnabler=Yes becuase GF6xx should works OOB with Mavericks. Good Luck Edited June 15, 2014 by tragediana150 Link to comment Share on other sites More sharing options...
mrjayviper Posted June 15, 2014 Share Posted June 15, 2014 Paste the Device and Vendor ID to you APGM.kext and repair permissions. (and change your SMBios.plist for proper one - the one, in which you paste ID's of your card) If this will not work, download the graphics kexts from Mavericks DP8 and paste them to your S/L/E folder and reapair premissions. (search these kext on our forum) Don't use GraphicsEnabler=Yes becuase GF6xx should works OOB with Mavericks. Good Luck Can you tell me how to find the Device and Vendor ID for APGM.kext? I never had to do this for 10.9.2 that's all. I also never had to use a custom SMBios.plist when installing. I just used whatever myHack gave me. on 10.9.2, the only thing I use to boot the USB installer is "-f -v npci=0x2000". Both 10.9.2 and .3 USB installers were made using myHack 3.3.1. Link to comment Share on other sites More sharing options...
tragediana150 Posted June 15, 2014 Share Posted June 15, 2014 (edited) Can you tell me how to find the Device and Vendor ID for APGM.kext? I never had to do this for 10.9.2 that's all. I also never had to use a custom SMBios.plist when installing. I just used whatever myHack gave me. on 10.9.2, the only thing I use to boot the USB installer is "-f -v npci=0x2000". Both 10.9.2 and .3 USB installers were made using myHack 3.3.1. Ok, try this: 1. Install Chamelen Wizard and set your SMBios to MacPro 5.1 or MacPro 3.1. Save it and add this smbios to your ChameleonBoot.plist (in Chameleon Wizard). Then restart your machine and you will see the difference if the your login to desktop. If this will not help then try point 2 below. 2. Open your HD ---> System ---> Library ---> Extensions ---> AppleGraphicsPowerManagement.kext (click on this the right mouse button) and choose Show Content. Then enter Content ---> Info.plist and open it. Find the line where is MacPro 5.1 or MacPro 3.1 and there should be something like that: <key>MacPro5,1</key> <dict> <key>Vendor10deDevice1081</key> <dict> <key>Heuristic</key> <dict> <key>ID</key> <integer>0</integer> Now you need to search the internet for VendorID and DeviceID of your GeForce GT610 and replace it. And that's all 3.If this won't help, download the kexts from DP8 and replace it. P.S. I don't know if this true, but I think you shoul repair permissions before each point If this won't help you, consider to create a new topic, becuase this problem is not belong here in this section Edited June 15, 2014 by tragediana150 Link to comment Share on other sites More sharing options...
mrjayviper Posted June 15, 2014 Share Posted June 15, 2014 I've read back through several pages and it seems RC7 is not suitable for a FX81xx and I should use RC6 instead? I can't find the link to the RC7 kernel. I've various references to it (not the old RC7) like this one but there's no attachment. thanks! Link to comment Share on other sites More sharing options...
yoshijin Posted June 15, 2014 Share Posted June 15, 2014 Having some graphical issue in ibooks icons with the rc7 kernel. Was present with kernels prior to rc6 too, but does not occur with rc6. Anyone else having the same issue? I've read back through several pages and it seems RC7 is not suitable for a FX81xx and I should use RC6 instead? I can't find the link to the RC7 kernel. I've various references to it (not the old RC7) like this one but there's no attachment. thanks! See Here Link to comment Share on other sites More sharing options...
mrjayviper Posted June 15, 2014 Share Posted June 15, 2014 Thanks yoshi. Link to comment Share on other sites More sharing options...
Rampage Dev Posted June 16, 2014 Share Posted June 16, 2014 Having some graphical issue in ibooks icons with the rc7 kernel. Was present with kernels prior to rc6 too, but does not occur with rc6. Anyone else having the same issue? See Here Can you post a IOreg and a DSDT extract: http://rampagedev.wordpress.com/guides/how-to-use-ioreg/ http://rampagedev.wordpress.com/guides/extract-your-own-dsdt/ Thanks. 1 Link to comment Share on other sites More sharing options...
Duran Keeley Posted June 16, 2014 Share Posted June 16, 2014 Having some graphical issue in ibooks icons with the rc7 kernel. Was present with kernels prior to rc6 too, but does not occur with rc6. Anyone else having the same issue? See Here Might be a cache bug again. At the moment I don't have access to my AMD system to check but if someone else can comfirm please. Link to comment Share on other sites More sharing options...
Eweie Posted June 16, 2014 Share Posted June 16, 2014 MIght be a cache bug again. At the monent I don't have access to my AMD system to check but if someone else can comfirm please. yeah it happens to me too. doesn't bother me too much tho. the latest 2 kernels by Bronya have allowed me to use final cut pro for the first time in mavericks. before it only showed garbage on the screen and rendered garbage, now it works perfectly, I dont know if it's related. Link to comment Share on other sites More sharing options...
carlo_67 Posted June 16, 2014 Share Posted June 16, 2014 Might be a cache bug again. At the moment I don't have access to my AMD system to check but if someone else can comfirm please. I do not see any bugs, I downloaded the evidence from iBooks Store and the books are perfect the kernel is perfect rc7 I personally tried all the applications adobe suite, finalcut, office, iLife13 all perfect Link to comment Share on other sites More sharing options...
yoshijin Posted June 16, 2014 Share Posted June 16, 2014 Can you post a IOreg and a DSDT extract: http://rampagedev.wordpress.com/guides/how-to-use-ioreg/ http://rampagedev.wordpress.com/guides/extract-your-own-dsdt/ Thanks. Here you go : yeah it happens to me too. doesn't bother me too much tho. the latest 2 kernels by Bronya have allowed me to use final cut pro for the first time in mavericks. before it only showed garbage on the screen and rendered garbage, now it works perfectly, I dont know if it's related. I do not see any bugs, I downloaded the evidence from iBooks Store and the books are perfect the kernel is perfect rc7 I personally tried all the applications adobe suite, finalcut, office, iLife13 all perfect So it seems to be an issue with old processors like the phenoms (?) DSDT IOREG.rar 1 Link to comment Share on other sites More sharing options...
Agostino9446 Posted June 16, 2014 Share Posted June 16, 2014 i start up mavericks this morning e i haven't problem with dashboard...so now when i come back home i start up mavericks and look how icons in dashboard are....i want to say that this morning i didn't nothing only a few time on facebook ps.i have same mavericks on partition that i use for test and there i haven't this problem Link to comment Share on other sites More sharing options...
mrjayviper Posted June 16, 2014 Share Posted June 16, 2014 do I need patched KEXTs when using the recent kernels from Bronya? If yes, can you please provide a link? thanks Link to comment Share on other sites More sharing options...
Gismo Posted June 16, 2014 Share Posted June 16, 2014 Hi,try this kext for FX CPU http://www.insanelymac.com/forum/topic/281450-mavericks-kernel-testing-on-amd-formerly-mountain-lion-kernel-testing-on-amd/?p=2019324 2 Link to comment Share on other sites More sharing options...
tragediana150 Posted June 16, 2014 Share Posted June 16, 2014 Hi,try this kext for FX CPU http://www.insanelymac.com/forum/topic/281450-mavericks-kernel-testing-on-amd-formerly-mountain-lion-kernel-testing-on-amd/?p=2019324 This is very good package. I recommend 1 Link to comment Share on other sites More sharing options...
Gismo Posted June 16, 2014 Share Posted June 16, 2014 This is very good package. I recommend Thank applies carlo_67 1 Link to comment Share on other sites More sharing options...
José A. Posted June 16, 2014 Share Posted June 16, 2014 I'm experiencing a curious problem with networking in Mavericks (10.9.3) and the recently released rc7 kernel (I think the problem is in the previous kernels also). It seems that the network controller is recognized but the running system does not have internet access. Someone else posted the same problem starting at the following post: http://www.insanelymac.com/forum/topic/293219-nforce-os-x-mavericks-109-app-store-download-install-guide-on-a-series-6-or-7-nforce-chipset-intel-cpu-mobo/?p=2029507 and I replied about it also after a few posts in the following post: http://www.insanelymac.com/forum/topic/293219-nforce-os-x-mavericks-109-app-store-download-install-guide-on-a-series-6-or-7-nforce-chipset-intel-cpu-mobo/?p=2030844 I'm not sure it's a kernel issue, but in case it is, I'm reporting the problem here. Link to comment Share on other sites More sharing options...
Gismo Posted June 16, 2014 Share Posted June 16, 2014 try these kexts maybe it goes,this kext is rollback 10.9.0 http://www.insanelymac.com/forum/topic/281450-mavericks-kernel-testing-on-amd-formerly-mountain-lion-kernel-testing-on-amd/?p=2019324 Link to comment Share on other sites More sharing options...
Agostino9446 Posted June 16, 2014 Share Posted June 16, 2014 i start up mavericks this morning e i haven't problem with dashboard...so now when i come back home i start up mavericks and look how icons in dashboard are....i want to say that this morning i didn't nothing only a few time on facebook ps.i have same mavericks on partition that i use for test and there i haven't this problem Schermata 2014-06-16 alle 14.54.28.png no one for my bug ? Link to comment Share on other sites More sharing options...
José A. Posted June 16, 2014 Share Posted June 16, 2014 @Gismo: Unfortunately, the kexts (in /System/Library/Extensions) did not make a difference. Link to comment Share on other sites More sharing options...
larrougos Posted June 16, 2014 Share Posted June 16, 2014 With RC7 FIXED for old cpus youtube freezes after a while and has artifacts. AMD PHENOM 965 BE Link to comment Share on other sites More sharing options...
Duran Keeley Posted June 16, 2014 Share Posted June 16, 2014 no one for my bug ? Yes this is has been fixed in the past by kernels, alternative fix for now is Launchpad Refresh. See Below Start-up script (faster) Alternative Update on Launchpad Refresh: Sorry I didn't post this earlier only really started testing this tonight as I've had no time and I know +ira was looking at a solution like this. Much quicker way then using the Automator app is a LoginHook (replaced by launchd but still works in Mavericks) Here is how: Download bash file attached. Copy it to a folder after extracted EG: Your User folder Open Terminal Type sudo defaults write com.apple.loginwindow LoginHook (PATH TO SCRIPT)Example sudo defaults write com.apple.loginwindow LoginHook /Users/durankeeley/launchpad-refresh.shShould work for all users. DOWNLOAD http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=133334 Refresh App We have a WINNER!!! Updated Lauchpad Refresh... -Updates LaunchPad Icons -Looks for all .db's in Application Support/Dock & Updates them. -Saves Desktop Wallpaper & LaunchPad placement Don't forget to make it run on startup! Save the attached to Applications, Go to System Preferences -> Accounts -> Login items Add the Launchpad Refresh.app in here. DOWNLOAD http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=131937 1 Link to comment Share on other sites More sharing options...
Agostino9446 Posted June 16, 2014 Share Posted June 16, 2014 Yes this is has been fixed in the past by kernels, alternative fix for now is Launchpad Refresh. See Below Start-up script (faster) Refresh App Ok duran tommorow i'll try that...but why kernel has this problem?!at biggening i haven't this problem Link to comment Share on other sites More sharing options...
Recommended Posts