Andy Vandijck Posted November 3, 2013 Share Posted November 3, 2013 I have finished the new kernel with full PM support. In order to use this version of VoodooPState you will also need to install the new kernel and custom System.kext in /S/L/E (uses new rtc_clock_stepped and rtc_clock_stepping functions). It has no support for Intel i3/i5/i7 decently so I was unable to test it on my Intel rig, however... it did load with those 2 in place. I also included a new version of VoodooTSCSyncAMD (compiled for Mavericks). All was compiled by Xcode 5.0.1 (clang 5.0). Test it please and report back to me Sources are also included... AMD_PM_Pack.zip 7 Link to comment Share on other sites More sharing options...
Sinetek Posted November 3, 2013 Share Posted November 3, 2013 i managed to boot the system with SL's ACPI kexts, and it still crashes, although now things are a bit different.. 2 Link to comment Share on other sites More sharing options...
theconnactic Posted November 3, 2013 Author Share Posted November 3, 2013 i managed to boot the system with SL's ACPI kexts, and it still crashes, although now things are a bit different.. Please elaborate, Sinetek...? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted November 3, 2013 Share Posted November 3, 2013 I have finished the new kernel with full PM support. In order to use this version of VoodooPState you will also need to install the new kernel and custom System.kext in /S/L/E (uses new rtc_clock_stepped and rtc_clock_stepping functions). It has no support for Intel i3/i5/i7 decently so I was unable to test it on my Intel rig, however... it did load with those 2 in place. I also included a new version of VoodooTSCSyncAMD (compiled for Mavericks). All was compiled by Xcode 5.0.1 (clang 5.0). Test it please and report back to me Sources are also included... the same lag Link to comment Share on other sites More sharing options...
Andy Vandijck Posted November 3, 2013 Share Posted November 3, 2013 the same lag And PM works?You're able to see and change states with the PStateChanger? Link to comment Share on other sites More sharing options...
aplIIc Posted November 4, 2013 Share Posted November 4, 2013 I have finished the new kernel with full PM support. In order to use this version of VoodooPState you will also need to install the new kernel and custom System.kext in /S/L/E (uses new rtc_clock_stepped and rtc_clock_stepping functions). It has no support for Intel i3/i5/i7 decently so I was unable to test it on my Intel rig, however... it did load with those 2 in place. I also included a new version of VoodooTSCSyncAMD (compiled for Mavericks). All was compiled by Xcode 5.0.1 (clang 5.0). Test it please and report back to me Sources are also included... PM Pack and Kernel +VPState + System cleared kernelcache Stalls at launchd: Chimera Boot 2.2.1 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted November 4, 2013 Share Posted November 4, 2013 And PM works? You're able to see and change states with the PStateChanger? I can change between 4 states and on load see levels of states but how to confirm is there any way to use appleintelpowermanagment for that ? also blacklist=0 doesn't work with this kernel Link to comment Share on other sites More sharing options...
Andy Vandijck Posted November 4, 2013 Share Posted November 4, 2013 I can change between 4 states and on load see levels of states but how to confirm is there any way to use appleintelpowermanagment for that ? also blacklist=0 doesn't work with this kernel AICPUPM can't work on AMD.The Info tab should provide more info. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted November 4, 2013 Share Posted November 4, 2013 from 800 to 3200 hz temperature jump from 36 to 46 i can confirm it works fine but doesn't helped me on my problem but what great work again Link to comment Share on other sites More sharing options...
Dans1975 Posted November 4, 2013 Share Posted November 4, 2013 Hi I've been watching the development over the last few days.... are any of these test kernels applicable to an older AMD cpu? I am running Leopard/SL/L and ML and would like to work on Mav's as well. This is an AMD Althon X2 . Thanks Dans Link to comment Share on other sites More sharing options...
theconnactic Posted November 4, 2013 Author Share Posted November 4, 2013 Hey, Andy! Nice work: will this enable us to get rid of SleepEnabler/AICPUPM/NullCPU? Or it will be still necessary for proper system sleep? All the best! Hi I've been watching the development over the last few days.... are any of these test kernels applicable to an older AMD cpu? I am running Leopard/SL/L and ML and would like to work on Mav's as well. This is an AMD Althon X2 . Thanks Dans Make a partition and test it! We would love to hear about the results... Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted November 4, 2013 Share Posted November 4, 2013 i am always on this state with this load to make mac usable my pc needs even 1 % cpu load but continuous load for this percentage can you make a loop on kernel that make it use small load on cpu like 1 or 2 % but continuous use of this precintage i think may this help ! Link to comment Share on other sites More sharing options...
Shaneee Posted November 4, 2013 Share Posted November 4, 2013 I have finished the new kernel with full PM support. In order to use this version of VoodooPState you will also need to install the new kernel and custom System.kext in /S/L/E (uses new rtc_clock_stepped and rtc_clock_stepping functions). It has no support for Intel i3/i5/i7 decently so I was unable to test it on my Intel rig, however... it did load with those 2 in place. I also included a new version of VoodooTSCSyncAMD (compiled for Mavericks). All was compiled by Xcode 5.0.1 (clang 5.0). Test it please and report back to me Sources are also included... Load still pretty low but frequency is either 100% or 200% Received bad artefacts on the login screen not had them since the first kernel. System doesn't seem and quicker or slower. Temp is lower than it is in Windows lol Edit: CPU Speed lowered Went from factory 2.70 to 1.60 GHz 1 Link to comment Share on other sites More sharing options...
aplIIc Posted November 4, 2013 Share Posted November 4, 2013 same as above with "blacklist=1": Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted November 4, 2013 Share Posted November 4, 2013 by the way when AICPUPM is loaded this appears on log 11/4/13 1:14:32.000 AM kernel[0]: ACPI_SMC_PlatformPlugin::pushCPU_CSTData - _CST evaluation failed 11/4/13 1:14:32.000 AM kernel[0]: [MSR] detected invalid rdmsr( 198) at 0x 81168d3f Link to comment Share on other sites More sharing options...
Dans1975 Posted November 4, 2013 Share Posted November 4, 2013 Ok, next step to set up test partition....let you know.... cheers 1 Link to comment Share on other sites More sharing options...
Sinetek Posted November 4, 2013 Share Posted November 4, 2013 Well, I managed to get the WindowServer running without Compositor acceleration, now i can launch applications and get crash logs for OpenGL apps.. gpumercury dylib is the culprit.. 3 Link to comment Share on other sites More sharing options...
theconnactic Posted November 4, 2013 Author Share Posted November 4, 2013 The culprit for the nVidia bugs, the artifacts in general, or something else? Anyway, great job, Sinetek! All the best! Link to comment Share on other sites More sharing options...
Sinetek Posted November 4, 2013 Share Posted November 4, 2013 both artifacts and nvidia crashes. 2 Link to comment Share on other sites More sharing options...
theconnactic Posted November 4, 2013 Author Share Posted November 4, 2013 So you just discovered the hive where this bug lives, Sinetek: a great accomplishment indeed. Way to go! Now it's perhaps possible to squash it! Anyway, why does this particular dylib cause so much havoc? CPUIDs? Missing opcodes? Link to comment Share on other sites More sharing options...
Sinetek Posted November 4, 2013 Share Posted November 4, 2013 no not really, it's just that this piece of code calls a 'callback' function, presumably back in the kernel, and somehow the link between the two fails to connect. Or something like that. it might also be a propagation error, whereby a failure in the driver sets in motion a series of failures, up to that dylib which then crashes. who knows 4 Link to comment Share on other sites More sharing options...
theconnactic Posted November 4, 2013 Author Share Posted November 4, 2013 Oh, I see. No premature celebrations, then... Link to comment Share on other sites More sharing options...
Shaneee Posted November 4, 2013 Share Posted November 4, 2013 So using Lion or even SL dylib in place wouldn't work? Edit: Or possibly from Mavericks DP1 if it worked then? DP1 file didn't change anything. Link to comment Share on other sites More sharing options...
Duran Keeley Posted November 4, 2013 Share Posted November 4, 2013 Hi MariusT All I got was a white screen and spinner by replacing GPUSupport.framework (Strange because I normally only get that with my nVidia) and just a plain white screen with a cursor in safe mode. libGPUSupportMercury.dylib (from /System/Library/PrivateFrameworks/GPUSupport.framework/Versions/A/Libraries) is not in Lion or DP1 of ML, if this is not there in 10.8.4 then there is no QE/CI. I thought it was the libGPUSupportMercury.dylib since it was the only change from Lion. 1 Link to comment Share on other sites More sharing options...
aplIIc Posted November 4, 2013 Share Posted November 4, 2013 Hehe... cute... got it just fine AnV Link to comment Share on other sites More sharing options...
Recommended Posts