Mavericks kernel testing on AMD (formerly Mountain Lion kernel testing on AMD)

[aplIIc]

Try kernel mach_rc5_blacklist.

If enable blacklist , then flag -blacklist =))

Additionally fixed for family k10 .

mach_rc5_blacklist.zip

Does not work for me in Clover, Chimera, Chameleon- all boot into blackscreen (no reboot)... with -blacklist , no kernelcache at all.

[Shaneee]

I cant replace kernel and kexts becose for some reson i do not see my 2nd hdd in os x sl.

 

Make a post in the help topic about this.

[Mohamed Khairy]

I get error upon installing...and when try to boot my pc reset...

if this occurred at end of set up

boot from flash memory , choose partion you installed on it and type

hd(0.1)/mach_kernel

 

as hd(0.1) is yours flash memory 

[Chris Etheridge]

Shanee, will try replacing the kexts from Lion to Mavericks (even though its a shot in the wind)

Feel free to give me anything you want to test, especially anything graphics associated

[Bronya]

Does not work for me in Clover, Chimera, Chameleon- all boot into blackscreen (no reboot)... with -blacklist , no kernelcache at all.

ok , maybe wrong in cpuid.c for family k10 ...

[Diazz72]

if this occurred at end of set up

boot from flash memory , choose partion you installed on it and type

hd(0.1)/mach_kernel

 

as hd(0.1) is yours flash memory

 

Can you be mor detail...tnx :-)

[Bronya]

@Bronya ,

 

je ne comprend pas pourquoi que pendant le test opencl les bug pixel rouge disparaissent ??

 

Я не понимаю, почему ошибка, что во время теста красного пикселя OpenCL идти?

 

I do not understand why the bug that during the red pixel opencl test go?

maybe not enough instructions for cpu processor  ...

[Shaneee]

@Bronya ,

 

je ne comprend pas pourquoi que pendant le test opencl les bug pixel rouge disparaissent ??

 

Я не понимаю, почему ошибка, что во время теста красного пикселя OpenCL идти?

 

I do not understand why the bug that during the red pixel opencl test go?

 

Red pixel on HD5450,

 

[Mohamed Khairy]

Can you be mor detail...tnx :-)

press tab on chameleon

you will see boot loader with out theme

 

you will find your flash memory the first one

 

named some thing like this   

hd(0.1) os x base system  ..

[Diazz72]

press tab on chameleon

you will see boot loader with out theme

 

you will find your flash memory the first one

 

named some thing like this   

hd(0.1) os x base system  ..

 

I'll try it . . .but can this be done in clover?

 

I can't use chameleon, becouse when i try to boot in to setup that work with clover my pc reset. . .

[Mohamed Khairy]

I'll try it . . .but can this be done in clover?

hadn't tried it

but i think no as clover nearly use anther method on naming partion 

[Mohamed Khairy]

I'll try it . . .but can this be done in clover?

 

I can't use chameleon, becouse when i try to boot in to setup that work with clover my pc reset. . .

sent to you PM 

[Bronya]

For family 16 now fixed .

Updated .

mach_rc5_blacklist_fix.zip

[Shaneee]

For family 16 now fixed .

Updated .

mach_rc5_blacklist_fix.zip

 

Confirmed and working on Athlon II X2 215 

[Bronya]

Good Night !!!! =))))))))))

[Shaneee]

Good Night !!!! =))))))))))

 

Now to get the Graphics sorted out If its possible from the kernel that is.

[aplIIc]

Good night Bronya!! =^)

[spakk]

Try kernel mach_rc5_blacklist.

If enable blacklist , then flag -blacklist =))

Additionally fixed for family k10 .

mach_rc5_blacklist.zip

It seems like I'm back in business, Bronya

I have booted your last mach_rc5_blacklist kernel, while it gets stuck at this message:  PCIRoot uid value wasnt found, using 0, if you want it to be 1, use -PCIRootUID flag

I have now booted with PCIRootUID=0 npci=0x3000 -f, a gray screen with KP no message

Edited November 2, 2013 by spakk

[Shaneee]

Shanee, will try replacing the kexts from Lion to Mavericks (even though its a shot in the wind)

 

Feel free to give me anything you want to test, especially anything graphics associated

 

Did you have any luck with the kexts?

[Diazz72]

I am now stuck @

[spakk]

I found this here on http://forge.voodooprojects.org/p/chameleon/source/tree/4/branches/rekursor/i386/libsaio/pci_root.c

	/*
2	 * Copyright 2009 netkas
3	 */
4	
5	#include "libsaio.h"
6	#include "bootstruct.h"
7	
8	#ifndef DEBUG_PCIROOT
9	#define DEBUG_PCIROOT 0
10	#endif
11	
12	#if DEBUG_PCIROOT==1
13	#define DBG(x...)  printf(x)
14	#else
15	#define DBG(x...)
16	#endif
17	
18	int rootuid = 10; //value means function wasnt ran yet
19	
20	unsigned int findrootuid(unsigned char * dsdt)
21	{
22	int i;
23	for (i=0; i<64; i++) //not far than 64 symbols from pci root
24	{
25	if(dsdt[i] == '_' && dsdt[i+1] == 'U' && dsdt[i+2] == 'I' && dsdt[i+3] == 'D' && dsdt[i+5] == 0x08)
26	{
27	return dsdt[i+4];
28	}
29	}
30	printf("pci root uid not found\n");
31	return 11;
32	}
33	
34	unsigned int findpciroot(unsigned char * dsdt,int size)
35	{
36	int i;
37	for (i=0; i<size; i++)
38	{
39	if(dsdt[i] == 'P' && dsdt[i+1] == 'C' && dsdt[i+2] == 'I' && (dsdt[i+3] == 0x08 || dsdt [i+4] == 0x08))
40	{
41	return findrootuid(dsdt+i);
42	}
43	}
44	
45	printf("pci root not found\n");
46	return 10;
47	}
48	
49	
50	/* Setup ACPI. Replace DSDT if DSDT.aml is found */
51	int getPciRootUID()
52	{
53	int fd, version;
54	void *new_dsdt;
55	const char *dsdt_filename;
56	const char *val;
57	int user_uid_value;
58	char dirspec[512];
59	int len,fsize;
60	
61	if(rootuid < 10) return rootuid;
62	
63	if (!getValueForKey("DSDT", &dsdt_filename, &len, &bootInfo->bootConfig))
64	dsdt_filename="DSDT.aml";
65	
66	if (getValueForKey("-pci1", &val, &len, &bootInfo->bootConfig))  //fallback
67	{
68	user_uid_value = 1;
69	rootuid = user_uid_value;
70	return rootuid;
71	}
72	else user_uid_value = 0;
73	
74	
75	// Check booting partition
76	sprintf(dirspec,"%s",dsdt_filename);
77	fd=open (dirspec,0);
78	if (fd<0)
79	{// Check Extra on booting partition
80	sprintf(dirspec,"/Extra/%s",dsdt_filename);
81	fd=open (dirspec,0);
82	if (fd<0)
83	{// Fall back to booter partition
84	sprintf(dirspec,"bt(0,0)/Extra/%s",dsdt_filename);
85	fd=open (dirspec,0);
86	if (fd<0)
87	{
88	verbose("No DSDT found, using 0 as uid value.\n");
89	rootuid = user_uid_value;
90	return rootuid;
91	}
92	}
93	}
94	
95	// Load replacement DSDT
96	new_dsdt=(void*)MALLOC(file_size (fd));
97	if (!new_dsdt)
98	{
99	printf("Couldn't allocate memory for DSDT\n");
100	rootuid = user_uid_value;
101	return rootuid;
102	}
103	fsize = file_size(fd);
104	if (read (fd, new_dsdt, file_size (fd))!=file_size (fd))
105	{
106	printf("Couldn't read file\n");
107	rootuid = user_uid_value;
108	return rootuid;
109	}
110	close (fd);
111	rootuid=findpciroot(new_dsdt, fsize);
112	if(rootuid == 11)rootuid=0; //usualy when _UID isnt present, it means uid is zero
113	if(rootuid == 10) //algo failed, PCI0 wasnt found;
114	{
115	printf("pci root uid value wasnt found, using zero, if you want it to be 1, use -pci1 flag");
116	rootuid = user_uid_value;
117	}
118	free(new_dsdt);
119	return rootuid;
120	}

who has an idea?

[Chris Etheridge]

Did you have any luck with the kexts?

 

Gonna give it a test now, trying one by one the following:

 

ATI500Controller.kext

ATISupport.kext

ATIFrambuffer.kext

 

Funnily enough, my Mavericks has no ATI****Controller.kext ?

[Shaneee]

I found this here on http://forge.voodooprojects.org/p/chameleon/source/tree/4/branches/rekursor/i386/libsaio/pci_root.c

	/*
2	 * Copyright 2009 netkas
3	 */
4	
5	#include "libsaio.h"
6	#include "bootstruct.h"
7	
8	#ifndef DEBUG_PCIROOT
9	#define DEBUG_PCIROOT 0
10	#endif
11	
12	#if DEBUG_PCIROOT==1
13	#define DBG(x...)  printf(x)
14	#else
15	#define DBG(x...)
16	#endif
17	
18	int rootuid = 10; //value means function wasnt ran yet
19	
20	unsigned int findrootuid(unsigned char * dsdt)
21	{
22	int i;
23	for (i=0; i<64; i++) //not far than 64 symbols from pci root
24	{
25	if(dsdt[i] == '_' && dsdt[i+1] == 'U' && dsdt[i+2] == 'I' && dsdt[i+3] == 'D' && dsdt[i+5] == 0x08)
26	{
27	return dsdt[i+4];
28	}
29	}
30	printf("pci root uid not found\n");
31	return 11;
32	}
33	
34	unsigned int findpciroot(unsigned char * dsdt,int size)
35	{
36	int i;
37	for (i=0; i<size; i++)
38	{
39	if(dsdt[i] == 'P' && dsdt[i+1] == 'C' && dsdt[i+2] == 'I' && (dsdt[i+3] == 0x08 || dsdt [i+4] == 0x08))
40	{
41	return findrootuid(dsdt+i);
42	}
43	}
44	
45	printf("pci root not found\n");
46	return 10;
47	}
48	
49	
50	/* Setup ACPI. Replace DSDT if DSDT.aml is found */
51	int getPciRootUID()
52	{
53	int fd, version;
54	void *new_dsdt;
55	const char *dsdt_filename;
56	const char *val;
57	int user_uid_value;
58	char dirspec[512];
59	int len,fsize;
60	
61	if(rootuid < 10) return rootuid;
62	
63	if (!getValueForKey("DSDT", &dsdt_filename, &len, &bootInfo->bootConfig))
64	dsdt_filename="DSDT.aml";
65	
66	if (getValueForKey("-pci1", &val, &len, &bootInfo->bootConfig))  //fallback
67	{
68	user_uid_value = 1;
69	rootuid = user_uid_value;
70	return rootuid;
71	}
72	else user_uid_value = 0;
73	
74	
75	// Check booting partition
76	sprintf(dirspec,"%s",dsdt_filename);
77	fd=open (dirspec,0);
78	if (fd<0)
79	{// Check Extra on booting partition
80	sprintf(dirspec,"/Extra/%s",dsdt_filename);
81	fd=open (dirspec,0);
82	if (fd<0)
83	{// Fall back to booter partition
84	sprintf(dirspec,"bt(0,0)/Extra/%s",dsdt_filename);
85	fd=open (dirspec,0);
86	if (fd<0)
87	{
88	verbose("No DSDT found, using 0 as uid value.\n");
89	rootuid = user_uid_value;
90	return rootuid;
91	}
92	}
93	}
94	
95	// Load replacement DSDT
96	new_dsdt=(void*)MALLOC(file_size (fd));
97	if (!new_dsdt)
98	{
99	printf("Couldn't allocate memory for DSDT\n");
100	rootuid = user_uid_value;
101	return rootuid;
102	}
103	fsize = file_size(fd);
104	if (read (fd, new_dsdt, file_size (fd))!=file_size (fd))
105	{
106	printf("Couldn't read file\n");
107	rootuid = user_uid_value;
108	return rootuid;
109	}
110	close (fd);
111	rootuid=findpciroot(new_dsdt, fsize);
112	if(rootuid == 11)rootuid=0; //usualy when _UID isnt present, it means uid is zero
113	if(rootuid == 10) //algo failed, PCI0 wasnt found;
114	{
115	printf("pci root uid value wasnt found, using zero, if you want it to be 1, use -pci1 flag");
116	rootuid = user_uid_value;
117	}
118	free(new_dsdt);
119	return rootuid;
120	}

who has an idea?

 

Not sure how to implement it or I would add it for a test.

 

Gonna give it a test now, trying one by one the following:

 

ATI500Controller.kext

ATISupport.kext

ATIFrambuffer.kext

 

Funnily enough, my Mavericks has no ATI****Controller.kext ?

 

Are you using the GM release from AppStore?

[Chris Etheridge]

Are you using the GM release from AppStore?

Yup.

[Shaneee]

Yup.

 

On Mavericks its not ATI Controller its AMD*000Controller.kext