Bronya Posted January 21, 2013 Share Posted January 21, 2013 Heya, my bad, I got busy. I'm still looking for a job in Germany for this summer. Well, this indicates the opemu is doing something wrong. When does the KP occur? -- Sinetek Yes ! I fix errors opemu for 32 bit and write xnu_src for i386 for lion 10.7.4 , it work with flag arch=i386 , but i get same panic_trap and etc ... maybe it is problem another )))) 1 Link to comment Share on other sites More sharing options...
Deltac0 Posted January 21, 2013 Share Posted January 21, 2013 - APU is AMD's CPU May I correct you... APU = AMD's CPU + GPU combination, just like Intel's i5 and i7. I think APUs are meant for laptops and cheap desktops, not for power-users. Link to comment Share on other sites More sharing options...
Sinetek Posted January 21, 2013 Share Posted January 21, 2013 Ah yeah good point there Bronya, you remind me of something that could be tried.. You know, maybe the nVidia drivers (and ATI too..) work a bit better under x86_32 mode. Let's dig up the ML DP1 again, see where that goes. -- Sinetek Link to comment Share on other sites More sharing options...
Bitcore Posted January 21, 2013 Share Posted January 21, 2013 Ah yeah good point there Bronya, you remind me of something that could be tried.. You know, maybe the nVidia drivers (and ATI too..) work a bit better under x86_32 mode. Let's dig up the ML DP1 again, see where that goes. -- Sinetek Sinetek , could you please tell me why your " AMD test 1" kernel works so good on fx? Bitcore Link to comment Share on other sites More sharing options...
Sinetek Posted January 21, 2013 Share Posted January 21, 2013 Delete /System/Library/Extensions/AppleGraphicsPowerManagement.kext Sinetek , could you please tell me why your " AMD test 1" kernel works so good on fx? Bitcore Not sure, I don't remember what is special about this kernel :/ Not much I think it's like the others. You can try -nossse3bit perhaps or -nosse42bit with AnV's rehash of the kernel? Link to comment Share on other sites More sharing options...
Bitcore Posted January 21, 2013 Share Posted January 21, 2013 Delete /System/Library/Extensions/AppleGraphicsPowerManagement.kext Not sure, I don't remember what is special about this kernel :/ Not much I think it's like the others. You can try -nossse3bit perhaps or -nosse42bit with AnV's rehash of the kernel? too bad ;s nope that doesn't work.I got anv's kernel working by setting some cpu settings in my BIOS. So maybe you made it enable some special feature? Thanks, Bitcore Link to comment Share on other sites More sharing options...
Bronya Posted January 21, 2013 Share Posted January 21, 2013 Ah yeah good point there Bronya, you remind me of something that could be tried.. You know, maybe the nVidia drivers (and ATI too..) work a bit better under x86_32 mode. Let's dig up the ML DP1 again, see where that goes. -- Sinetek Yes ! But i have qe/ci ! But in single user one problem - it is no correct keyboard . Maybe no correct xnu with opemu ... One problem - if xnu with emu ssse3 , then no correct work sse3 or sse2 or sse or mmx and etc ... Therefore to be write correct xnu_src. --Bronzovka Link to comment Share on other sites More sharing options...
Sinetek Posted January 21, 2013 Share Posted January 21, 2013 Yes ! But i have qe/ci ! But in single user one problem - it is no correct keyboard . Maybe no correct xnu with opemu ... One problem - if xnu with emu ssse3 , then no correct work sse3 or sse2 or sse or mmx and etc ... Therefore to be write correct xnu_src. --Bronzovka what GPU? for keyboard you need a kext. spasiba Link to comment Share on other sites More sharing options...
Bronya Posted January 21, 2013 Share Posted January 21, 2013 what GPU? for keyboard you need a kext. spasiba No. I have keyboard apple ! If I press the button, the screen shows something else ... Because without sse4_2 and etc ... Maybe opemu - it is conflict with sse3 or another .... Link to comment Share on other sites More sharing options...
theconnactic Posted January 21, 2013 Author Share Posted January 21, 2013 Hi, Bronzovka! I just read you got QE/CI with mountain Lion, right? Is it 10.8.2? Which kernel did you use for it? More important yet, which GPU do you use? About your keyboard issues, can you upload a picture of what's going on when you press the button? Best regards and welcome on board! Link to comment Share on other sites More sharing options...
Bronya Posted January 21, 2013 Share Posted January 21, 2013 Hi, Bronzovka! I just read you got QE/CI with mountain Lion, right? Is it 10.8.2? Which kernel did you use for it? More important yet, which GPU do you use? About your keyboard issues, can you upload a picture of what's going on when you press the button? Best regards and welcome on board! Hi theconnactic! Yes ! QE/CI for 10.7.5 and 10.8.2 ! But in 10.8.2 problem maybe GPU , because i no know for GPU. )))) Soon picture for keyboard ! It is problem on 10.7.4 . One problem - it is no correct xnu ... I new wrote xnu_src my ! Now work keyboard normal ! But problem it to in gui and panic "panic_trap" ... Link to comment Share on other sites More sharing options...
spakk Posted January 21, 2013 Share Posted January 21, 2013 Heya, my bad, I got busy. I'm still looking for a job in Germany for this summer. Well, this indicates the opemu is doing something wrong. When does the KP occur? -- Sinetek The problem occurs most frequently when I open programs and tools on such. TextEdit, Disk Utility, sometimes when I opening safari or when I want to open the terminal. Link to comment Share on other sites More sharing options...
Tyler Worth Posted January 21, 2013 Share Posted January 21, 2013 I used Sinteks kernel on my AMD Fx-8150 and I can install it using "-v -x -f npci=0x2000 PCIRootUID=0" but when I reboot after install it will just reboot. over and over again. not sure what to do I but the same flags for installation when booting but no prevail. damn fx processor. Good news it only took 15 minutes to install Link to comment Share on other sites More sharing options...
spakk Posted January 21, 2013 Share Posted January 21, 2013 Hello and welcome bronzovka!! please, can you upload your modified drivers here? What Graphic card do you have? Link to comment Share on other sites More sharing options...
Bronya Posted January 21, 2013 Share Posted January 21, 2013 Hello and welcome bronzovka!! please, can you upload your modified drivers here? What Graphic card do you have? Hi , spakk ! I have atiradeon 5770 ! Add driver aty_init for this 5770 and work =) Link to comment Share on other sites More sharing options...
spakk Posted January 21, 2013 Share Posted January 21, 2013 I used Sinteks kernel on my AMD Fx-8150 and I can install it using "-v -x -f npci=0x2000 PCIRootUID=0" but when I reboot after install it will just reboot. over and over again. not sure what to do I but the same flags for installation when booting but no prevail. damn fx processor. Good news it only took 15 minutes to install boot only with npci=0x2000 or npci=0x3000 PCIRootUID=0 or 1 -v -f then look at where the system is hanging. did you have taken the decrypter, and the patched dylid placed in /usr/lib/ ? or try with the amd_kernel by Andy and remove FakeSMC and Dont steal ...kext from S/L/E Hi , spakk ! I have atiradeon 5770 ! Add driver aty_init for this 5770 and work =) bronzovka, many thanks for your quick response, that does not help me, unfortunately, I have the Nvidia GTX 550 TI with 3 GByte I used Sinteks kernel on my AMD Fx-8150 and I can install it using "-v -x -f npci=0x2000 PCIRootUID=0" but when I reboot after install it will just reboot. over and over again. not sure what to do I but the same flags for installation when booting but no prevail. damn fx processor. Good news it only took 15 minutes to install What kind of Sinetek kernel did you use? Link to comment Share on other sites More sharing options...
SS01 Posted January 21, 2013 Share Posted January 21, 2013 Update: for the moment, chat server went back to irc.osx86.hu if it doesn't get more stable, i might move us to SystemNet Link to comment Share on other sites More sharing options...
spakk Posted January 21, 2013 Share Posted January 21, 2013 Update: for the moment, chat server went back to irc.osx86.hu if it doesn't get more stable, i might move us to SystemNet chat.osx86.hu: Could not connect!! Link to comment Share on other sites More sharing options...
Bitcore Posted January 21, 2013 Share Posted January 21, 2013 sinetek , i see you "harcoded the TLC to 18" in AMD test 1 kernel. How can we set the "TLC" ? and what is it? Thanks a lot! Bitcore Link to comment Share on other sites More sharing options...
Thunderbolt Posted January 21, 2013 Share Posted January 21, 2013 On the first install with -nossse3bit I was not getting any errors, but a fresh install even after -nossse3bit I get a ZN18xxx but the system boots up fine and no issues. Link to comment Share on other sites More sharing options...
Thunderbolt Posted January 21, 2013 Share Posted January 21, 2013 I can install the flash player + VLC but cannot install Xcode. "Xcode quit Unexpectedly" could this be due to the kernel ? Link to comment Share on other sites More sharing options...
Tyler Worth Posted January 22, 2013 Share Posted January 22, 2013 boot only with npci=0x2000 or npci=0x3000 PCIRootUID=0 or 1 -v -f then look at where the system is hanging. did you have taken the decrypter, and the patched dylid placed in /usr/lib/ ? or try with the amd_kernel by Andy and remove FakeSMC and Dont steal ...kext from S/L/E bronzovka, many thanks for your quick response, that does not help me, unfortunately, I have the Nvidia GTX 550 TI with 3 GByte What kind of Sinetek kernel did you use? I have not pathed or did a decrypter. I do not know how to do this haha. Link to comment Share on other sites More sharing options...
Deltac0 Posted January 22, 2013 Share Posted January 22, 2013 I have not pathed or did a decrypter. I do not know how to do this haha. AnV made a new decrypter kext: AppleDecrypt.kext... I'm not sure if Spakk meant this, but you could try. I think it's somewhere in this thread. Link to comment Share on other sites More sharing options...
Tyler Worth Posted January 22, 2013 Share Posted January 22, 2013 AnV made a new decrypter kext: AppleDecrypt.kext... I'm not sure if Spakk meant this, but you could try. I think it's somewhere in this thread. Okay but If I have a Virtual box on my Laptop and I am trying to install this on my Desktop can I just use my Virtual box to move this file to my Usb Install i am using iAtkos ML on my usb. and I have gotten myself lost after reading and learning so much. im in overload. Link to comment Share on other sites More sharing options...
spakk Posted January 22, 2013 Share Posted January 22, 2013 AnV made a new decrypter kext: AppleDecrypt.kext... I'm not sure if Spakk meant this, but you could try. I think it's somewhere in this thread. Yes I mean Andys new Decrypter kext: AppleDecrypt.kext !!!! Link to comment Share on other sites More sharing options...
Recommended Posts