Shaneee Posted January 3, 2013 Share Posted January 3, 2013 Integrity test failed still.. Also still have graphics problems. Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 3, 2013 Share Posted January 3, 2013 Fips Fail still Present or lets say ported over rest behaves pretty much the same I don't know this is possible... @Sinetek: which version of Xcode do you use to compile? If it isn't too much to ask could you compile the SinetekBronzovkAnVoodoo patch and the SinetekAnV patch and post the kernels? Something very odd here... For compairason: I built it with Xcode 4.5.2 Link to comment Share on other sites More sharing options...
theconnactic Posted January 3, 2013 Author Share Posted January 3, 2013 Yeah, Andy: no changes. It must be the opemu. Sinetek was trying to improve it yesterday, but he was having a heck of a hard time. Btw, happy birthday! Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 3, 2013 Share Posted January 3, 2013 Yeah, Andy: no changes. It must be the opemu. Sinetek was trying to improve it yesterday, but he was having a heck of a hard time. Btw, happy birthday! Ok I'll build my full one with the previous opemu to see Post back soon Link to comment Share on other sites More sharing options...
theconnactic Posted January 3, 2013 Author Share Posted January 3, 2013 The problem, Andy, is the older one still has this crucial flaw: it runs only on user space. That's why some kexts, specially the ones related to multimedia (remember, simd instructions like mmx and ssse3 are multimedia-related) fail to run like they should. But i'll test your build as soon as it's ready. Best regards. Link to comment Share on other sites More sharing options...
DaMadOne Posted January 3, 2013 Share Posted January 3, 2013 Im just confirming what others have said.. but the pause after swapon SUCCESS takes a WHOLE lot less time than it did with your last kernel. Dont know if you tweaked this or its just a byproduct of something else you did. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 3, 2013 Share Posted January 3, 2013 till now trying to run ML installer from first working test kernel to latest one but appletymcdriver.kext cause panic so removed it and then it reach to working mouse but the language select menu doesn't appear !! where is the problem ? Link to comment Share on other sites More sharing options...
zchef2k Posted January 3, 2013 Share Posted January 3, 2013 It's the birthday edition (today is my birthday lol -> 03/01/1985 ) 03/01/1976, here. Happy Birthday to you too buddy! 1 Link to comment Share on other sites More sharing options...
DaMadOne Posted January 3, 2013 Share Posted January 3, 2013 Mohamed, for the most part right now you need to boot with -x flag to enable safeboot so that graphics acceleration doesnt get loaded... its broken as of now, or remove all graphics kexts. EDIT: Happy Bday AnV and zchef2k! 1 Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 3, 2013 Share Posted January 3, 2013 03/01/1976, here. Happy Birthday to you too buddy! Thanks, you too I've had an idea. I added the opemu kernel trap. When it is built please test also without -nossse3bit... Post soon I've had an idea. I added the opemu kernel trap. When it is built please test also without -nossse3bit... Post soon Link to comment Share on other sites More sharing options...
Deltac0 Posted January 3, 2013 Share Posted January 3, 2013 Happy birthday Andy and Zchef2k! 1 Link to comment Share on other sites More sharing options...
spakk Posted January 3, 2013 Share Posted January 3, 2013 Happy birthday Andy and Zchef2k! Happy Birtday Andy and Zchef2k Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 3, 2013 Share Posted January 3, 2013 Mohamed, for the most part right now you need to boot with -x flag to enable safeboot so that graphics acceleration doesnt get loaded... its broken as of now, or remove all graphics kexts. EDIT: Happy Bday AnV and zchef2k! doesnt reach to mouse on -x mode --------- Happy Bday AnV and zchef2k Link to comment Share on other sites More sharing options...
DaMadOne Posted January 3, 2013 Share Posted January 3, 2013 hmm.. some have had success with myhack installer.. I did not. Some have made their own vanilla USB installers which I probably will once the kinks get worked out.. what I have done and makes it easy is use the iATKOS ML2 version.. and then just ran the installer inside my working SL partition and installed to ML partition. then just replaced the necessary files and boot it up. Link to comment Share on other sites More sharing options...
spakk Posted January 3, 2013 Share Posted January 3, 2013 I'm compiling Sinetek's diff right now with only the 2 boot options -nossse3bit -nosse42bit I hope this one works (apart from that it's Sinetek his patch) Post when done... Here it is... Use the -nossse3bit boot flag to boot. NOTE: This has no built-in kernel decryptor... use my AppleDecrypt.kext or FakeSMC Please test it and report back A.S.A.P please test with last Andys Kernel; boot flag -f -v maxmem=4096 cpus=6 npci=0x3000 Kernel Extensions in backtrace: com.apple.AppleFSCompression..................... Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 3, 2013 Share Posted January 3, 2013 Here is the kernel with also the opemu kernel trap. It uses the previous opemu... Patch included... Test with and without -nossse3bit... Lets hope it works better... Please test A.S.A.P and post back... SinetekBronzovkAnVoodoo_test3.diff.zip amd_kernel.zip Link to comment Share on other sites More sharing options...
spakk Posted January 3, 2013 Share Posted January 3, 2013 Here is the kernel with also the opemu kernel trap. It uses the previous opemu... Patch included... Test with and without -nossse3bit... Lets hope it works better... Please test A.S.A.P and post back... with: -nossse3bit -v without cpus=1 cpu haltesd!!! than reboot with: -nossse3bit -v cpus=1 en0:setPowerState returns rv=IOPMAckImplied with: -v -f -F cpus=1 npci=0x3000 en0:setPowerState returns rv=IOPMAckImplied Hi Andy, can you configure me the dsdt only for USB-IDE? not with the variant ULTRA 100 TX2 Promise, please then I can test better. Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 3, 2013 Share Posted January 3, 2013 I'm making one that sets a recovery ip in the kernel trap... I've also made kernel trap opemu disable with -nokopemu boot argument Post soon... Link to comment Share on other sites More sharing options...
spakk Posted January 3, 2013 Share Posted January 3, 2013 I'm making one that sets a recovery ip in the kernel trap... I've also made kernel trap opemu disable with -nokopemu boot argument Post soon... thx Link to comment Share on other sites More sharing options...
theconnactic Posted January 3, 2013 Author Share Posted January 3, 2013 Sorry, Andy: no luck yet. With -nossse3bit, the system went to the same dump of the previous session of SL on display, no GUI. Without it, the system never boots. Thank you very much for your effort, man: you really rock! It's your birthday, yet you're the one who's trying to gift us. I'm skeptical if a fully working kernel is doable without some reworking on the opemu (and, as far as Athlon CPUs are concerned, some Athlon-specific patches). Sinetek is working on it AFAIK. Best regards! 1 Link to comment Share on other sites More sharing options...
instant idiot Posted January 3, 2013 Share Posted January 3, 2013 Here is the kernel with also the opemu kernel trap. It uses the previous opemu... Patch included... Test with and without -nossse3bit... Lets hope it works better... Please test A.S.A.P and post back... Without -nossse3bit: Kernel is LP64 With -nossse3bit: FIPS USER Space POST: Integrity test failed! Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 3, 2013 Share Posted January 3, 2013 Yeah... if the kernel opemu works it will be cool... I've made a new kernel... boot flags: -nossse3bit = disables SSE3 flag in the kernel (don't use on test 1, we need to test the kernel opemu) -nosse42bit = disables SSE4.2 flag in the kernel -nokopemu = disable the kernel trap opemu (don't use unless the kernel trap always fails) -nodecryptor = disable the built-in decryptor Please tests A.S.A.P and post back... I want to get the kernel trap for opemu working as then we can use kexts with SSSE3 Patch included.. I hope this will enable kernel space opemu... (That's what this test is for). It works by firing the opemu and next setting a recovery ip and then returning. SinetekBronzovkAnVoodoo_test4.diff.zip amd_kernel.zip Link to comment Share on other sites More sharing options...
instant idiot Posted January 3, 2013 Share Posted January 3, 2013 Rebooting... No special flags: warning: invalid kernel ip, won't attempt to handle trap -nokopemu: com.apple.AppleFSCompression.AppleFSCompressionTypeZlib KP -nossse3bit: FIPS USER Space POST: Integrity test failed! Link to comment Share on other sites More sharing options...
Deltac0 Posted January 3, 2013 Share Posted January 3, 2013 Yeah... if the kernel opemu works it will be cool... I've made a new kernel... boot flags: -nossse3bit = disables SSE3 flag in the kernel (don't use on test 1, we need to test the kernel opemu) -nosse42bit = disables SSE4.2 flag in the kernel -nokopemu = disable the kernel trap opemu (don't use unless the kernel trap always fails) -nodecryptor = disable the built-in decryptor Please tests A.S.A.P and post back... I want to get the kernel trap for opemu working as then we can use kexts with SSSE3 Patch included.. I hope this will enable kernel space opemu... (That's what this test is for). It works by firing the opemu and next setting a recovery ip and then returning. Thanks for the information! Really... I was wondering the whole evening what are all these builds. Now I finally understand... Kernel space emu! Will test ASAP! Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 3, 2013 Share Posted January 3, 2013 Does it continue after that? Test the current and the previous please... I need to know which one is the right one... Link to comment Share on other sites More sharing options...
Recommended Posts