spakk Posted November 18, 2012 Share Posted November 18, 2012 I have it, but is it really just empty file? All I got was 0 bytes of... Well, nothing. The name was right... wait a moment, please Link to comment Share on other sites More sharing options...
Deltac0 Posted November 18, 2012 Share Posted November 18, 2012 wait a moment, please I will wait By the way, LaunchDaemon (launchd) is open-source and licensed under Apache 2 license, so it's totally legal to upload it No need to delete it, other users may need it too. Link to comment Share on other sites More sharing options...
spakk Posted November 18, 2012 Share Posted November 18, 2012 here is a nice tool http://www.macupdate...launchd-editor/ http://www.codepoetry.net/products/launchdeditor Link to comment Share on other sites More sharing options...
Deltac0 Posted November 18, 2012 Share Posted November 18, 2012 here is a nice tool http://www.macupdate...launchd-editor/ I already found that, but it just uses the launchd, which doesn't work I need a working launchd from Lion EDIT: I will install Lion to my own computer, this way I can easily try kexts from SL / Lion Link to comment Share on other sites More sharing options...
spakk Posted November 18, 2012 Share Posted November 18, 2012 I already found that, but it just uses the launchd, which doesn't work I need a working launchd from Lion EDIT: I will install Lion to my own computer, this way I can easily try kexts from SL / Lion I have to remove my hard drive from my AMD PC, is a little complicated, wait a instant yet here are no cost routes and spared to arrive at a positive conclusion at the moment I can only help with 10.6.8 and 10.8. Launched file, the Lion 10.7.4 is zero byte big, no idea why? what to do now? or Gils, can you load your Launched-file from your current LION up here, please Link to comment Share on other sites More sharing options...
spakk Posted November 18, 2012 Share Posted November 18, 2012 1. have tried to install launched editor on mountain lion, it does not work 2. what can be the reason that my Launched Zero byte has? although the system will boot normally Link to comment Share on other sites More sharing options...
spakk Posted November 18, 2012 Share Posted November 18, 2012 you looked at the file I have half of my post ? Danke Gils Gils, he means the Launched-file It's located in: /sbin/launchd see #497 has theconnatic leaving the sinking ship? I haven't seen him for long time here Link to comment Share on other sites More sharing options...
spakk Posted November 18, 2012 Share Posted November 18, 2012 ah! forgiveness! I did not quite follow I used google translation! I am sending you this now. where is Deltac0, he need the file Link to comment Share on other sites More sharing options...
spakk Posted November 18, 2012 Share Posted November 18, 2012 et voici !! http://www.envoyerce...1353268167.html I've put the file sbin file (hidden) thanks Gils, you are the best now can Deltac0 boot lion Link to comment Share on other sites More sharing options...
Deltac0 Posted November 18, 2012 Share Posted November 18, 2012 Hi! Thanks Gils for the file! Will try it now! EDIT: NEW PANIC! FINALLY! I mean, we solved the launchd problem! Gils, could upload the whole kexts folder from Lion? I know it's a huge folder, but those kexts should work with the kernel. The panic is @ attachments. EDIT2: xD, my mistake... I had my USB drive connected.... :/ Now booting without it, hopefully not another launchd panic... EDIT3: SAME PANIC......... This is getting ridiculous... The version of the file doesn't matter... It just doesn't work. Tried with 10.8 DP1, 10.7.5, 10.6.8 launchd, NO DIFFERENCE, always ERROR 86. I will now look at the kernel source, what is this error 86... Link to comment Share on other sites More sharing options...
instant idiot Posted November 18, 2012 Share Posted November 18, 2012 Just a moment, I'll try uploading my 10.7.5 /System/Library/Extentions/... Shall I upload launchd too? Link to comment Share on other sites More sharing options...
instant idiot Posted November 18, 2012 Share Posted November 18, 2012 http://bayfiles.com/file/sqSF/HbPt4h/SLE.zip Link to comment Share on other sites More sharing options...
spakk Posted November 18, 2012 Share Posted November 18, 2012 Hi! Thanks Gils for the file! Will try it now! EDIT: NEW PANIC! FINALLY! I mean, we solved the launchd problem! Gils, could upload the whole kexts folder from Lion? I know it's a huge folder, but those kexts should work with the kernel. The panic is @ attachments. EDIT2: xD, my mistake... I had my USB drive connected.... :/ Now booting without it, hopefully not another launchd panic... EDIT3: SAME PANIC......... This is getting ridiculous... The version of the file doesn't matter... It just doesn't work. Tried with 10.8 DP1, 10.7.5, 10.6.8 launchd, NO DIFFERENCE, always ERROR 86. I will now look at the kernel source, what is this error 86... We urgently need to look for the cause of the error Launched 86 , Request for feedback please Link to comment Share on other sites More sharing options...
Shaneee Posted November 19, 2012 Share Posted November 19, 2012 I am getting the launchd errno 86 now aswell. The install starts loading as lion does then KP's. From what I found its something to do with drivers not being mounted. I have tried the launchd file from 10.8 DP1 and my 10.7.4 installation. EDIT: System froze instead of kp. Booted using, -legacy arch=i386 -force64 -v npci=0x2000 It freezes at BSD root: disk2s2, major 14, minor 11 On Lion right after that line is launchd loading... Is this classed as progress or another brick wall? Link to comment Share on other sites More sharing options...
theconnactic Posted November 19, 2012 Author Share Posted November 19, 2012 Watching closely this thread, at least twice a day. I didn't abandon the boat, my friends. Very interested to see if you guys can succeed in booting ML DP1. That would be an enormous step! Gilles, glad to see you here at last! Link to comment Share on other sites More sharing options...
spakk Posted November 19, 2012 Share Posted November 19, 2012 I am getting the launchd errno 86 now aswell. The install starts loading as lion does then KP's. From what I found its something to do with drivers not being mounted. I have tried the launchd file from 10.8 DP1 and my 10.7.4 installation. EDIT: System froze instead of kp. Booted using, -legacy arch=i386 -force64 -v npci=0x2000 It freezes at BSD root: disk2s2, major 14, minor 11 On Lion right after that line is launchd loading... Is this classed as progress or another brick wall? Please boot with boot flag: -v busratio=20 arch=i386 -force64 maxmem=4096 npci=0x2000 Link to comment Share on other sites More sharing options...
Deltac0 Posted November 19, 2012 Share Posted November 19, 2012 Hi! I'm a little busy at this moment, but when I'm back home (about 6½h), I'll look the launchd source and find out the error 86! Lion 10.7.4: http://www.opensourc...launchd-392.38/ Mountain Lion 10.8.0: http://www.opensourc...launchd-442.21/ EDIT: I FOUND IT! /usr/lib/sys/errno.h says this: #define EBADARCH 86 /* Bad CPU type in executable */ Have fun investigating more, I gotta go now... 1 Link to comment Share on other sites More sharing options...
Shaneee Posted November 19, 2012 Share Posted November 19, 2012 Please boot with boot flag: -v busratio=20 arch=i386 -force64 maxmem=4096 npci=0x2000 Didn't help. Still pauses before launchd loads. Will take a look at the launchd source and see if there is anything I can do. Link to comment Share on other sites More sharing options...
spakk Posted November 19, 2012 Share Posted November 19, 2012 I am getting the launchd errno 86 now aswell. The install starts loading as lion does then KP's. From what I found its something to do with drivers not being mounted. I have tried the launchd file from 10.8 DP1 and my 10.7.4 installation. EDIT: System froze instead of kp. Booted using, -legacy arch=i386 -force64 -v npci=0x2000 It freezes at BSD root: disk2s2, major 14, minor 11 On Lion right after that line is launchd loading... Is this classed as progress or another brick wall? nice to see you, :wink2: Hi! I'm a little busy at this moment, but when I'm back home (about 6½h), I'll look the launchd source and find out the error 86! Lion 10.7.4: http://www.opensourc...launchd-392.38/ Mountain Lion 10.8.0: http://www.opensourc...launchd-442.21/ EDIT: I FOUND IT! /usr/lib/sys/errno.h says this: #define EBADARCH 86 /* Bad CPU type in executable */ Have fun investigating more, I gotta go now... Great work, Deltac0 :wink2: Link to comment Share on other sites More sharing options...
Deltac0 Posted November 19, 2012 Share Posted November 19, 2012 Great work, Deltac0 :wink2: Thanks! I'm back @ home now, time to start experimenting with some AMD patching EDIT: Don't know what is the problem with launchd... The error 86 is Bad CPU type, but the launchd runs fine when ran from SL. The problem means that the launchd is x86_64... Don't understand, when I do "file launchd" it says that it IS universal PPC / i386 / x86_64... I will now install Lion on my Phenom II machine (32-bit), then I will modify the XCode 4.2 for SL to run on Lion 32-bit. Then I'll compile a new launchd with ARCHS="i386" option, it should work... But I just don't understand why it doesn't work with the universal binary. Link to comment Share on other sites More sharing options...
spakk Posted November 19, 2012 Share Posted November 19, 2012 Thanks! I'm back @ home now, time to start experimenting with some AMD patching EDIT: Don't know what is the problem with launchd... The error 86 is Bad CPU type, but the launchd runs fine when ran from SL. The problem means that the launchd is x86_64... Don't understand, when I do "file launchd" it says that it IS universal PPC / i386 / x86_64... I will now install Lion on my Phenom II machine (32-bit), then I will modify the XCode 4.2 for SL to run on Lion 32-bit. Then I'll compile a new launchd with ARCHS="i386" option, it should work... But I just don't understand why it doesn't work with the universal binary. Hello my friend, On Windows I have in the Xnu-2050.7.9 (Mountain Lion 10.8) after "Bad CPU type in executable" sought and found 15 files with this entry. in the first file "nfs-vnops" on line 6931 "DUMPANDLOG, / * 86 EBADARCH Bad CPU type in executable * /" Please look at the pictures. >>> Edit: Info about various errors including "86 EBADARCH Bad CPU type in executable" Network error codes In the case of network errors (e.g. a connection to a proxy server fails) Proxifier outputs error code numbers. These are the standard error codes. This section contains the codes of network errors and their description. see here: http://www.proxifier...n/v2/errors.htm Edit: search for: cputypes.h result: kern_exec mkmakefile thread ast kern_xxx Link to comment Share on other sites More sharing options...
Deltac0 Posted November 19, 2012 Share Posted November 19, 2012 Hello my friend, On Windows I have in the Xnu-2050.7.9 (Mountain Lion 10.8) after "Bad CPU type in executable" sought and found 15 files with this entry. in the first file "nfs-vnops" on line 6931 "DUMPANDLOG, / * 86 EBADARCH Bad CPU type in executable * /" Please look at the pictures. >>> Edit: Info about various errors including "86 EBADARCH Bad CPU type in executable" Network error codes In the case of network errors (e.g. a connection to a proxy server fails) Proxifier outputs error code numbers. These are the standard error codes. This section contains the codes of network errors and their description. see here: http://www.proxifier...n/v2/errors.htm Thanks for information! I just found a a book about some OS X things by searching the load_init_program(). And there was this explanation how the launchd is launched: I underlined the main parts of it. This is exactly why the kernel panics! Link: http://books.google.fi/books?id=FKRL5AOgiC0C&pg=PT296&lpg=PT296&dq=load_init_program&source=bl&ots=Tg42m7KcUX&sig=F5CI7KrMJtwTU1iuTV1wbKBq_JQ&hl=fi&sa=X&ei=-1aqUOXMF5KK4gToqYD4AQ&ved=0CCYQ6AEwAQ#v=onepage&q&f=false Link to comment Share on other sites More sharing options...
spakk Posted November 19, 2012 Share Posted November 19, 2012 Thanks for information! I just found a a book about some OS X things by searching the load_init_program(). And there was this explanation how the launchd is launched: I underlined the main parts of it. This is exactly why the kernel panics! Link: http://books.google....epage&q&f=false Thanks for information! Link to comment Share on other sites More sharing options...
spakk Posted November 19, 2012 Share Posted November 19, 2012 Deltac0 and what are we doing now? has anyone an idea? Link to comment Share on other sites More sharing options...
spakk Posted November 19, 2012 Share Posted November 19, 2012 a very interesting website if it should interest anyone: http://osxbook.com/software/xbinary/ Link to comment Share on other sites More sharing options...
Recommended Posts