marvelloard Posted July 13, 2012 Share Posted July 13, 2012 Hi! I just installed Mountain Lion GM successfully on my system (ep45-ds3l, 4GB RAM, 8600GTS) and it runs very well and quite vanilla. Just added fakesmc and changed applertc kext because of BIOS resets. Cartri BIOS works well too.. Still I'm looking for a working JMicronATA.kext for 10.8. Can someone help me? I didn't found a working one. Sleepenabler.kext would be nice to have too (needed this in 10.7 although the usage of Cartri BIOS. old one creates kernel panics..). Overall it performs much better than 10.7.4 on both: my hackintosh and mac mini. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/ Share on other sites More sharing options...
Riley Freeman Posted July 14, 2012 Share Posted July 14, 2012 Try renaming your old kext to JMicronATA.kext and overwrite the one that comes with ML GM. That fixed it for me. Hoping for a more vanilla solution in time. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1833555 Share on other sites More sharing options...
marvelloard Posted July 14, 2012 Author Share Posted July 14, 2012 Not very vanilla, but works, thanks. Edit: Interesting: My hackintosh went to sleep (forgot to turn off) and woke up on keystroke just fine. Looks I don't need Sleepenabler.kext any longer. Like in Snow Leopard it works just fine! Still I'm using Cartri Bios, without DSDT. Just to mention. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1833666 Share on other sites More sharing options...
asapreta Posted July 14, 2012 Share Posted July 14, 2012 I tried using the original ML jmicronATA.kext and the one I have in lion but no luck till now. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1833801 Share on other sites More sharing options...
MacGTO Posted July 18, 2012 Share Posted July 18, 2012 i found a solution....i have modified a old kext APPLEPCIIDE.kext with the id of my jmicronata controller and it works.... i hope that it work also for you!! WARNING:::: add your id to kext if your controller ins't recognize. ApplePCIIDE.kext.zip 3 Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1834832 Share on other sites More sharing options...
Riley Freeman Posted July 18, 2012 Share Posted July 18, 2012 Hi MacGTO. Thanks for the fix! It seems to be working good here on my JMicron 363 (with a DVD-RW drive). It's nice to be able to leave the original JMicron kext untouched now I've added the remaining JMicron devices to the kext. It now supports 361, 363, 365, 366 and 368. ApplePCIIDE.kext.zip 1 Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1834949 Share on other sites More sharing options...
Riley Freeman Posted July 28, 2012 Share Posted July 28, 2012 I've now compiled the kext in 10.8. It shouldn't make much difference really, except that it's now 64-bit only. Here it is if anyone wants it. Like the one above, it has ids for all the JMB36x chips. ApplePCIIDE (JMicron 10.8).zip 7 Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1838225 Share on other sites More sharing options...
TH3L4UGH1NGM4N Posted July 29, 2012 Share Posted July 29, 2012 Funny, JmicronATA never worked for me before yet in the final release of Mountain Lion, I suddenly noticed my IDE DVD drive was picked up. Peeped inside which extensions were loaded and low and behold Jmicron wanted to finally load itself up in my system. Sporting a board very similar to yours, GA-EP43-UD3L. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1838300 Share on other sites More sharing options...
Riley Freeman Posted July 29, 2012 Share Posted July 29, 2012 I only had problems with the GM because that was the first time the stock kext had been updated since 10.6, breaking the previous edited JMicron one. Your board has the JMB368 which is the only chipset the Apple kext supports. Mine has the 363 so it's always needed an injector kext of some kind. Actually, the only component our boards have in common is the iTE sensor chip. Everything else is different. Does your drive show up as internal (in System Profiler)? The GM kext seems to be relegated to a card reader driver now so I think anything it loads will be treated as removable storage. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1838379 Share on other sites More sharing options...
D-an-W Posted July 29, 2012 Share Posted July 29, 2012 Could this kext be modified to include SATA controllers as I have the same problem on my system? Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1838416 Share on other sites More sharing options...
Riley Freeman Posted July 29, 2012 Share Posted July 29, 2012 You shouldn't need anything like this for SATA, especially if that board in your sig is the one you're using. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1838473 Share on other sites More sharing options...
D-an-W Posted July 29, 2012 Share Posted July 29, 2012 Thanks, I fixed it with a DSDT edit. I am not really sure how what I did fixes it but my ICH10 is now reported as a ESB2 AHCI and the DVD drive now ejects and DVD player works ok. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1838487 Share on other sites More sharing options...
Riley Freeman Posted July 29, 2012 Share Posted July 29, 2012 Yeah that's just how OS X treats the ESB2 controller. I managed to break that by using an injector kext to change the device name back to my ICH8. So it seems if OS X sees the controller as ESB2 it will treat attached devices as internal. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1838555 Share on other sites More sharing options...
kocoman Posted October 23, 2012 Share Posted October 23, 2012 Why is it that (IDE only) when I plug in 80 conductor cable, my Mountain Lion will boot, but if I plug in 40 conductor cable, it will be stuck at Still waiting for root device. Is there any way to enable more debug messages from the JmicronATA kext? I tried debug=8 but it didn't show any more information. Also where to find the source code for ApplePCIIDE? Is there a 1.1.3 version of JmicronATA source code? thanks Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1862543 Share on other sites More sharing options...
Poppa John Posted February 5, 2013 Share Posted February 5, 2013 Riley Freeman, you're a God-send. After updating to ML flawlessly, your kext/attachment in post #7 got 10.8.x to recognize my IDE drives on my Gigabye EP45-UD3P. Mucho gracias!! And I just popped my post virginity just to say Thanks. Well worth it! Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1886163 Share on other sites More sharing options...
Blame73 Posted April 2, 2013 Share Posted April 2, 2013 I've now compiled the kext in 10.8. It shouldn't make much difference really, except that it's now 64-bit only. Here it is if anyone wants it. Like the one above, it has ids for all the JMB36x chips. Thank you!! It now works on my P5B (JMicron ATA JMB363) 10.8.3 Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1902993 Share on other sites More sharing options...
savoirfaire Posted July 20, 2013 Share Posted July 20, 2013 I seriously love you guys Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1933507 Share on other sites More sharing options...
cdoublejj Posted July 27, 2013 Share Posted July 27, 2013 oh wow i'm gonna have to try this. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1935036 Share on other sites More sharing options...
cdoublejj Posted July 28, 2013 Share Posted July 28, 2013 IT WORKS! I'm running an ASUS P5E3 Deluxe and i can see my files! Somebody make post #7 a sticky. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1935075 Share on other sites More sharing options...
fuljo Posted August 3, 2013 Share Posted August 3, 2013 Thank you very much! This works for me on Mavericks DP4 (i have JMB 363 and IDE DVD-RW drive) Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-1936404 Share on other sites More sharing options...
cdoublejj Posted December 17, 2014 Share Posted December 17, 2014 guess i will test it with mavericks Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-2095767 Share on other sites More sharing options...
SoulSet Posted May 10, 2015 Share Posted May 10, 2015 Any success so far in Yosemite? I have IDE DVD-RW and hard disk drive on JMB363 (ASUS P5B deluxe) and didn't find a solution so far to get them recognized in latest OSX... :-( Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-2134386 Share on other sites More sharing options...
Riley Freeman Posted May 10, 2015 Share Posted May 10, 2015 I have different hardware now so I can't test my 10.8 kext in Yosemite but I'm guessing it should work. Make sure to boot with kext-dev-mode=1 in order to get unsigned kexts to load. Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-2134426 Share on other sites More sharing options...
SoulSet Posted May 12, 2015 Share Posted May 12, 2015 Thanks Freeman for answering so quickly! :-) The link for the kext appears to be dead... do you know where I can get it to try it out? Thanks in advance! Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-2135043 Share on other sites More sharing options...
Riley Freeman Posted May 12, 2015 Share Posted May 12, 2015 Ah, I see. I forgot older attachments are broken. I re-compiled it a couple of days back in Yosemite just in case the Mountain Lion kext didn't work. Here it is. ApplePCIIDE.kext (10.10).zip 1 Link to comment https://www.insanelymac.com/forum/topic/280575-jmicronata/#findComment-2135047 Share on other sites More sharing options...
Recommended Posts