John Cash Posted July 12, 2012 Share Posted July 12, 2012 Zap! 1 Link to comment Share on other sites More sharing options...
eyecrax Posted July 12, 2012 Share Posted July 12, 2012 Worked for me, I did need to set permissions (chmod) on the 'install' dir. I'm on a GA-EP45-UD3R with Cartri BIOS. Currently running without a DSDT, no KPs yet. Currently using a patched 10.7.4 AppleHDA.kext to enable full functionality for the Realtek ALC889a/885 high-definition audio codec. Geforce 9800 GTX fully working (QE/CI) with native resolution. Unable to locate "AppleRTCpatch.txt" so I currently have sleep disabled (CMOS was reset upon reboot after initializing sleep). You may want to link to your previous post http://www.insanelymac.com/forum/index.php?showtopic=276647 , without it this packs instructions (or lack thereof) aren't of much use. Otherwise nice work John Cash! Keep it up! Link to comment Share on other sites More sharing options...
Arkanis Posted July 13, 2012 Share Posted July 13, 2012 Well, after much work got this : - I'm using a custom DSDT. - To make it work with GraphicsEnabler=Yes I need to have PCIRootUID=1 into my plist otherwise black screen or errors. - I need to do more testing on this but P States and C States seems to produce strange behaviors on boot, so for now I removed them for now. Any clue if this affects under ML the computer ? - Using Chimera with 64bits Apple Screen {censored}s up everything, so sticking with the one provided. - Avoiding using ###### too, I've only had problems with it. Will keep posted on how things goes. Mobo : GA-x58a-UD5 A. Link to comment Share on other sites More sharing options...
John Cash Posted July 13, 2012 Author Share Posted July 13, 2012 The furnished plist already has: <key>PciRoot</key> <string>1</string> This should be taken care of by the DSDT but that's not always the case. I had to have in the version I published (no DSDT) because my testing it without PciRoot=1 resulted in a black screen. Pls keep us informed of your progress. Link to comment Share on other sites More sharing options...
Arkanis Posted July 13, 2012 Share Posted July 13, 2012 John, With the provided plist I was getting black screens, adding <key>PciRoot</key> in my plist and rebooting gives me this error now : hfs_swap_BTNode : invalide node kind (-81) hfs: node 1979 fileID=8 volume=Machintosh device=/dev/disk6s2 0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [Errtype FS] [MountPt] hfs: Runtime corruption detected on Machintosh, fsck will be forced on next mount Like something is corrupting my install... edited again the plist to it's initial stage wich is PCIRootUID=1 in the kernel flags and installation is corrupted again... Going to install this one more time and see what I can get, otherwise I will have to try the MyHack technique. Important thing is I haven't installed yet anyting : no extra kexts, no software, anything... this could maybe have something to do with Trim Enabler ? Since I'm installing over a SSD disk. Link to comment Share on other sites More sharing options...
Arkanis Posted July 13, 2012 Share Posted July 13, 2012 Reinstalled : - First boot, I get bootcache error. (using manualy PCIRootUID=1. - Second Boot, the hard drive is checked by the system at boot, I get in. Install Trim Enabler. - Third boot, AppleFSCompression error, and again the error listed in the above post + Validation failed dataSuffix error too... but after some time, I get in the OS. Try to log in and it takes forever. Going to try the myhack version... this is clearly not working for me :-/ Keep you posted. Same behavior with MyHack... guess I will have to wait for a better solution... back to Lion until then. Link to comment Share on other sites More sharing options...
Recommended Posts