kyinx Posted May 24, 2012 Share Posted May 24, 2012 (edited) "I have successfully installed Mac OS X Leopard 10.5.2 - Kalyway on my HP 520 Notebook. It is running stable and good." "I will post about my experience soon. I am still experimenting with it. " This is about getting Mac OS X Lion up and running on an AMD Desktop. I have chosen Niresh's Distribution for my install. But I am sure that the procedure as well as the problems faced by everyone will be the same. So let's work it out. My Configuration: Motherboard: ASUS M4A88T-M-LE [ 880G Chipset ] Processor: AMD Phenom II X4 955 [ Black Edition ] Graphics: ATI Radeon HD 5670 [ 1GB GDDR5 ] RAM: Corsair Vengeance 2 x 4GB Procedure: 1. SATA Mode changed to AHCI from IDE This is for people facing Still waiting for root device error. Changing SATA mode to AHCI corrects it. 2. Took out a RAM Hackintosh has problems with Dual Channels most of the time . 3. Suspend mode changed to S3 from AUTO I am not sure about this. I was reading about a successful AMD installation with this configuration. But I saw no difference yet. 4. Booted from DVD with Boot: "Kernel Cache"=\amd arch=i386 -v Successfull discovery of all 4 cores of the CPU and 4GB RAM. 5. And this is where I get Stuck: USBMSC Identifier (non unique): 000000264001 0x424 0x4060 0x182 USBF: 54.274 AppleUSBOHCI [0x7fdb800] :: CheckSleepCapability - controller will be unloaded across sleep Check screenshot for details of the error message with complete install log. Friends, Requesting assistance with these issues. Kindly post your problems with installing Mac OS X Lion on AMD in this thread. Edited May 24, 2012 by PookyMacMan Please, no warez links and no misleading titles. Link to comment Share on other sites More sharing options...
Nedo113 Posted May 31, 2012 Share Posted May 31, 2012 I have the same problem I tink if We inject the ketx of our could start But maybe no it,s just test Link to comment Share on other sites More sharing options...
new2hacintosh Posted June 11, 2012 Share Posted June 11, 2012 You and I are in the same boat. However I can get a few steps further than you have gotten. Unfortunately I cannot get any of my test systems to boot into the Niresesh OS. Here are the system's that I tried on without success: System 1 Gigabyte GA-MA790GP-UD4H X6 1090t CPU Gigabyte 550Ti Video Card 4 GB Crucial DDR2 Ram WD 320GB Blue HDD System 2 Biostar A780L X3 720 (Unlocked to X4 20) 2 GB Generic HP DDR2 Ram XFX 9800 GT WD 320GB Blue HDD ``````````````````````````````````````````````````````````````````````````` This system below allowed me to install Niresh's OSX 10.7.3 to my surprise!! Your following command(s) allowed me to get to the installer. Without your help I was dead in the water. I tried your command on the machines listed above but the system below is the only one it worked on. "Kernel Cache"=\amd arch=i386 -v Gigabyte 970A-UD3H FX-8150(OC'd to 4.0) 8GB Kingston Hyper DDR3 1333 Ram Radeon x2400 Video Card (old but this system mainly transcodes videos) WD 320GB Blue HDD Here are 2 short videos of what I get when I try and boot into the OS. I am working on adding more content to the site so a few of the pages might be blank or very low on information at this time. I could get to the Mac install screen just fine with this one and even go into disk utility and partition drives and everything. Even though I could install the OS I cannot boot into 10.7.3 though. I took the hard drive and flash drive out that I am using as a boot drive and tried them both on systems 1 and 2 but cannot get either of them to boot into the OS. I tried multiple commands but none of them worked. Here are the commands that I tried but all of them failed to boot into the Operating system. Busratio=20 PCIRootUID=1 PCIRootUID=1 -x cpus=1 Ironically the second system (the Biostar motherboard system) is the one that I have Snow Leopard installed onto a different HDD. In order for me to get everything working on that system I had to use an XFX 9800 GT Video card along with a Creative Soundblaster sound card to get it working perfectly. Check this page to see what exactly I used to get it working without a hitch. There recently has been a posting here about Niresh's 10.7.3. It is in Portugese but can be translated through Google Chrome. I have tried it with all the commands in numerous orders but I cannot get it to work on the Gigabyte 970 board. I have tried a lot of the different commands listed below in different orders on the Biostar board but none of them work either. DSDT=0 that's a zero that I am using and not an O as in ohhhh DropSSDT=Yes Drop SSDT=Yes At the top of the bios screen of the Gigabyte 970 it says its an ATOM bios so I also tried all of the commands above using. "Kernel Cache"=\atom -v None of any of this worked either. The last line of code I see says: Setting Legacy USB controller off on controller [1002:4396] Then the system reboots. I have tried to turn off the USB 3.0 controllers in the BIOS but that changes nothing. Link to comment Share on other sites More sharing options...
new2hacintosh Posted June 13, 2012 Share Posted June 13, 2012 This site has a guide to add the AMD Kernel to an installation. The site is in Portugese, which I don't speak or read, so its instructions don't help me. Anyone here understand what the author is talking about. I have the Lion app from the app store and I have Niresh's version also. Has anyone successfully installed Lion on an AMD Machine??? If so any and all assistance to us who have not would be greatly appreciated. 1 Link to comment Share on other sites More sharing options...
Bobert01 Posted June 24, 2012 Share Posted June 24, 2012 tried without the i386 part yet ? also on a working machine what you could do is load up google chrome and use its translator thingy perhaps ??? just a thought . Link to comment Share on other sites More sharing options...
dlxko Posted July 1, 2012 Share Posted July 1, 2012 Yea the same problem Used "Kernel Cache"=\amd arch=i386 -v busratio=16 cpus=4 Everything all right but then stucked on USBF Really dont know what to do to resolve this :/ I try to disable USB3 in Bios I try -legacy with panic Also posted here: http://www.insanelymac.com/forum/index.php?showtopic=279291 Also googled here: http://www.osx86.net/10-7-lion/15507-stuck-some-usbf.html Also screen here: http://db.tt/rxrwxmmr Thx for any reply Link to comment Share on other sites More sharing options...
Alien1959 Posted August 23, 2012 Share Posted August 23, 2012 Sorry to revive an old topic, but those getting stuck at booting the installer, did you disable C1E in Advanced CPU Settings for BIOS? It causes alot of errors. http://markanthonycianfrani.com/how-to-install-osx-10-6-7-on-amd-phenom/ this may help you guys alot Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted September 24, 2012 Share Posted September 24, 2012 Hey guys, I'm getting error on booting the install dvd. When I boot without -legacy I get stuck on imageboot_mount_image: root device When booting with -legacy I get past that but then KP immediately Link to comment Share on other sites More sharing options...
Thunderbolt Posted September 24, 2012 Share Posted September 24, 2012 My C1E is already disabled on my 960T GA-880gm-usb3 , and I still get the USB error Link to comment Share on other sites More sharing options...
theconnactic Posted September 24, 2012 Share Posted September 24, 2012 Hi, folks! With Niresh's, i think, you have to boot with these boot flags: amd -legacy npci=0x3000 -v Since it's a universal distro, it's important to type "amd" as a boot flag, so it recognizes your machines. Hope that helps. Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted September 25, 2012 Share Posted September 25, 2012 Well, thats what I get when using -legacy: Link to comment Share on other sites More sharing options...
ZiggyW Posted December 4, 2012 Share Posted December 4, 2012 Hi, I'm running 10.7.3 . My system is Asus m4a89gtd,AMDFX6100, radeon HD6850 4gb mem. Runs pretty good so far.. I boot with cpu=1 busratio=20 PCIRootUID=1 npci=0x2000 and UserKernelCache=No. Finder works in 64 bit !! I used iatkos with this guide : http://www.insanelymac.com/forum/topic/278181-amd-1073-guide-experimental-only/ The only thing that causes trouble that I can't use 32bit apps they crash when launched Link to comment Share on other sites More sharing options...
Recommended Posts