haxzion Posted May 25, 2012 Author Share Posted May 25, 2012 Core i5 2500K 3.33 GHz OC at 4.2 GHz (2 states: 16 & 42) DSDT? post your SSDT and your chameleon boot.plist Link to comment Share on other sites More sharing options...
Funkoyote Posted May 25, 2012 Share Posted May 25, 2012 DSDT? post your SSDT and your chameleon boot.plist Ok, finally I can inject it in my DSDT, thank you very much. But only 2 states in my 2500K CPU at 4.2 GHz (16,42) I have a patched ROM and no SSDT, and this is my org.chameleon.Boot.plist: <key>Graphics Mode</key> <string>1920x1080x32</string> <key>KeyLayout</key> <string>mac-es</string> <key>SystemType</key> <string>1</string> <key>Timeout</key> <string>3</string> <key>UseKernelCache</key> <string>Yes</string> My DSDT is the one you post, with my graphics edits (Radeon HD 5770) and SATA AHCI Intel 6 Series corrections. Link to comment Share on other sites More sharing options...
haxzion Posted May 26, 2012 Author Share Posted May 26, 2012 My DSDT is the one you post, with my graphics edits (Radeon HD 5770) and SATA AHCI Intel 6 Series corrections. I tried with this SSDT, but without success. Delete the code please you could send the file.btw this ssdt is for i7 Link to comment Share on other sites More sharing options...
haxzion Posted June 22, 2012 Author Share Posted June 22, 2012 Added new SSDT for a stock i5 2400 values taken from a real mac. Link to comment Share on other sites More sharing options...
oSxFr33k Posted July 15, 2012 Share Posted July 15, 2012 TheDjey, I am going to attempt to mod my ssdt with this tutorial http://macmanx86.blo...ml#comment-form I edited this post because it was too long and a different motherboard/processor but in general this is what I have observed about the error 18 and kernel panic. P-State Stepper Error 18 at step 2 in context 2 on CPU 1,2 etc. I could be wrong but I think you have to have a minimum number of p-states in the ssdt. I had 14 and I kept getting that error until I edited the sections in the ssdt to exactly the specs of my processor , 22 steps from 800-2900, and 4 turbo states near the beginning of the ssdt script. I think I kinda prooved the minimum number of pastes needed for a particular processor because when I inserted my two basic sections into a working ssdt such as one from Tonymac's MultiBe... I got the error 18 then kernel panic. With either 4 or 9 turbos stated, it did not matter, I still got the error when I inserted only 14 total pstates. Name (APSN, 0x09) <<< Either 4 or my default 9 still gave me the error. All i7's in general should have 4 turbo's, check your specs. Name (APSS, Package (0x0E) <<< My default ssdt was 0E, 14 states. After I changed this to (0x16), and inserted all 22 states, I was able to boot. I used tony's working ssdt for a while but his had 24 states ranging from 1600-3900. I just modified his to range from 800 to 2900 which is what the mobile processor i7-2630QM calls for. Link to comment Share on other sites More sharing options...
haxzion Posted August 29, 2012 Author Share Posted August 29, 2012 Added Patched bios 3.20 and dsdt for that bios with all the needed patches plus a generic GPU injection (check PEG0) Link to comment Share on other sites More sharing options...
westwaerts Posted October 26, 2012 Share Posted October 26, 2012 i dont have the same board, but the same problems. speedstep only brings the lowest 16 and the turbo step 38. trying different machine prefs ( like macmini or macbookpro8,3 ( as suggested here)) brings me a kernel panic at boot ( with appleintelcpupowermanagment.plist) so i only can boot into imac 12,2, which has an undefined speedstep ( out of the SP11dictionary in imac_12,2.plist). somewhere here i red that imac12,2 doesnt speedstep at all. greatful for any hint, that brings me speedstep back ( as in 10.6.8) EDIT: while trying to get macbookpro8,3 running ( different SSDT, C and P-state enabled in Chameleon) i discovered my machine running better on MBP8,3 than Imac12,2 (kernel: MSRDumper PStatesReached: 16 20 25 30 35 38) and IGP + descret grafics AMD running with APGM so i keep that, TXH for bringing me to the Point Link to comment Share on other sites More sharing options...
schickimiki Posted October 26, 2012 Share Posted October 26, 2012 Hi, thanks for your post! Might help if you tell me why you list version 2.00 and 3.20 bios DSDT and patched bios if I only found a 2.10 BIOS version on the Asrock website (which I installed on my mainboard). Are these for the Asrock z68 Pro3 (not Gen3)? What are those versions if they don't match the BIOS version and what should I do with them? Sorry, I'm kind of newbie... Thanks for any help! Link to comment Share on other sites More sharing options...
haxzion Posted December 14, 2012 Author Share Posted December 14, 2012 ASROCK P67 PRO3 B3 bios + DSDT only as the title says and i have personaly tested over time all the files i have posted.. Link to comment Share on other sites More sharing options...
Synth1980 Posted January 26, 2013 Share Posted January 26, 2013 Hi I have p67 pro 3 mb, i5 2300 cpu. I use attached in this topic dsdt, made custom ssdt, and patching iMac 12,2 Chameleon-2.1 as bootloader. Everything is working fine but system freezing sometimes. I also use patched AppleRTC.kext because clocks in bios resetting. Link to comment Share on other sites More sharing options...
haxzion Posted May 9, 2013 Author Share Posted May 9, 2013 added fully working sensors pack from kozlek with some edits to work with this board.. Link to comment Share on other sites More sharing options...
permfors Posted September 5, 2015 Share Posted September 5, 2015 Will this work on Yosemite? I'm making my first hackintosh today.. Can I just install this using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] without using the patched bios? Link to comment Share on other sites More sharing options...
Recommended Posts