AMD Radeon HD 6650M / Graphics Enabler / DSDT / HDMI Audio / Acer Aspire 7750G - 2674G50Mnkk [Gradients Fixed]

[SnakeHaveYou]

Well, i got my 7670m acceleration working without any DSDT, finally!

[kralbesiktas]

Hi everyone,

 

Where can I find to DisplayMergeNUB.kext 

[dwais]

Hi. Who can help in enabling Radeon HD 6650m on AMD platform? I have try it many times, but haven't success

ioreg - iSelf.zip

iSelf-DSDT.aml.zip

iSelf-origin.zip

iSelf-vbios.zip

DarwinDumper_2.9.7_Clover_X64_3176_3182_Mav_iself.tar.lzma.zip

[grexai926]

Hi there

i am trying to make at 6470m working again but now with mavericks 10.9.5
i have DSDT which made by @Trucker MK
i patch my amd6000controller like 
i changed this 
00040000040300000001000012040105

00080000040200000001000011020403
to the patched :
02000000400000000901000010000201

10000000100200000001000000000403
i uploaded the clean and patched one too
when i want to start with DSDT and the patched amd6000 i got no errors but this this grey screen

so i can boot only safe and its okay dsdt is working you can see it recognises my video card
Im using chameleon 2.2
i have reattached my videobios too
any ideas what could go wrong and why it doesn't boot normaly  ? Wrong patching ?

 

10.9.5amd6000.zip

vgabios.zip

[acero]

hi ,

a member  freuser said that some time ago , try it :

I had similar problem, but it was not related to video card. If I choose any SMBIOS except MacBookAir6.1 + generation of PStates, it stucks for a while at the end of boot and then I get a white screen. If I select MacBookAir6.1 SMBIOS or disable PStates generation, it boots fine. IMO it's related to X86PlatformPlugin in my case. Maybe something similar happens to you (I guess you are using custom SSDT for PStates).

[grexai926]

I tried it but actually it doesn't solve the problem same grey screen
In safe mode there is no Qe / CI

[vusun123]

I tried it but actually it doesn't solve the problem same grey screen

In safe mode there is no Qe / CI

What laptop is this ?

[grexai926]

Asus X54h-y (K54LY)
Intel Core i 3 2330m 2,2Ghz
Ati radeon 6470m  1Gb Vram
4GB ram DD3 1333Mhz

[vusun123]

Asus X54h-y (K54LY)

Intel Core i 3 2330m 2,2Ghz

Ati radeon 6470m  1Gb Vram

4GB ram DD3 1333Mhz

Do this for me, set your SMBios to Macbook Pro 8,2 ( that way, you get native AGPM for your AMD 6470M later ). Second, post your AMD ROM here and let me see it. Third, why not installing Yosemite ? UEFI boot is fine, and you can get your GPU to work right on first boot with " Boot OS X without cache " ( of course with framebuffer editing )

Edit: If you have a 1366x768 resolution panel, use frambuffer Lotus and set DualLink=0, don't use framebuffer patching. I got the AMD 6470M on the Low Resolution HP Probook to work that way

[grexai926]

okay i will try that smbios. I don't use yosemite becasuse i yosemite creates a recovey partition and i can't make the partitions like this : apple os x, windows  and data.  because if i use yosemite there are no mbr slots left and i can't use data partition under windows. 
in post 929 i attached vga bios. 
Thanks for helping
 

[vusun123]

okay i will try that smbios. I don't use yosemite becasuse i yosemite creates a recovey partition and i can't make the partitions like this : apple os x, windows  and data.  because if i use yosemite there are no mbr slots left and i can't use data partition under windows. 

in post 929 i attached vga bios. 

Thanks for helping

Go GPT and use Clover please. Clover is the key to make your GPU less painful for you

[grexai926]

Clover is not an option, because i my computer does not boot under clover
how to set duallink to 0 ? 
actually it has 1366x768 resolution

Edit : this methot what ive written was working with moutain lion( pithecia+ dsdt ) , but now i don't have the the right patched kexts only the dsdt ( insanley mac old upload folder is down) . thats why i moved to mavericks

[vusun123]

Clover is not an option, because i my computer does not boot under clover

how to set duallink to 0 ? 

actually it has 1366x768 resolution

 

Edit : this methot what ive written was working with moutain lion( pithecia+ dsdt ) , but now i don't have the the right patched kexts only the dsdt ( insanley mac old upload folder is down) . thats why i moved to mavericks

I know why it won't boot Clover. Because in Sandy Bridge Asus laptop, you must not rename the EFI partition, leave it unnamed. I own one myself for sometime now ( see signature ), and use it without issues. Keep in mind that update your BIOS to latest version helps alot

[grexai926]

Allright i will give a try to clover again... luckly last week ive flashed the latest BIOS
i will report soon
Edit:
So today i'va tried macbook pro 8.2 smbios but i hasn't solved the problem...same grey screen i think something must be wrong with the patched stuff ....

soon i will install to an  OTHER HDD a test system with clover so i can report you .
( PS, off) do you have idea how i  could i make this 3 partition with yosemite without loosing data( WIN7, yosemite DATA ( NTFS))...on an other notebook ( old stuff ) i tried this but windows can't see my data partitions ( because of the mbr slots )

[vusun123]

Allright i will give a try to clover again... luckly last week ive flashed the latest BIOS

i will report soon

Edit:

So today i'va tried macbook pro 8.2 smbios but i hasn't solved the problem...same grey screen i think something must be wrong with the patched stuff ....

soon i will install to an  OTHER HDD a test system with clover so i can report you .

( PS, off) do you have idea how i  could i make this 3 partition with yosemite without loosing data( WIN7, yosemite DATA ( NTFS))...on an other notebook ( old stuff ) i tried this but windows can't see my data partitions ( because of the mbr slots )

Dunno, I abandonned MBR as soon as I found a way for GPT to work even on non-UEFI systems. Your card may need a patch, but for now you should use Lotus + DualLink=0 with Clover first ( don't put your DSDT in, it won't load Lotus FB )

[grexai926]

To everyone using Ati 6470m ->come look at this topic 

http://www.insanelymac.com/forum/topic/305496-asus-x54hy-installion-yosemite-1010x-windows-7-dual-boot-ati-6470m-fully-working/

i made this description with vusun123  ati 6470m is fully working with CLOVER
im expanding it right now, 

 

[shrex23]

Hey guys, I am using HP G62005ax.

 

It has inbuilt 7640G and external 7670m for Graphics. I managed to install and everything is fine, except graphics. I am getting 4mb vram and the only way I can boot properly is by injecting 7670M via clover with VBIOS on. I have also injected my EDID from the laptop, which i obtained from windows.

 

I've been trying to follow the thread to work, but I have a few problems.

 

1. I have Insyde Bios and i have no option to disable any graphics card, internal or external. I've read this is essential to get QE/CI running. Could someone guide me on this?

 

2. Applying framebuffers via clover and with different framebuffers seems to be having no affects. Could someone please guide me?

 

Here is the log from the mac-

Shreyashs-Mac-Pro:~ shreyash$ kextstat | grep AMD
   96    1 0xffffff7f82293000 0x11f000   0x11f000   com.apple.kext.AMDSupport (1.2.8) <95 85 12 11 7 5 4 3 1>
   97    0 0xffffff7f823b2000 0x419000   0x419000   com.apple.kext.AMD6000Controller (1.2.8) <96 85 12 11 5 4 3 1>
  100    0 0xffffff7f81e0d000 0x3a8000   0x3a8000   com.apple.AMDRadeonX3000 (1.2.8) <99 85 12 7 5 4 3 1>

From System Info-

First(7640G)
Display:

  Type:    GPU
  Bus:    PCIe
  PCIe Lane Width:    x0
  VRAM (Total):    4 MB
  Vendor:    ATI (0x1002)
  Device ID:    0x9903
  Revision ID:    0x0000
  Kernel Extension Info:    No Kext Loaded
  Displays:
Display:
  Resolution:    1366 x 768
  Pixel Depth:    32-Bit Color (ARGB8888)
  Main Display:    Yes
  Mirror:    Off
  Online:    Yes


Second(7670M)
Display:

  Type:    GPU
  Bus:    PCIe
  PCIe Lane Width:    x8
  Vendor:    ATI (0x1002)
  Device ID:    0x6840
  Revision ID:    0x0000



58    0 0xffffff7f810a3000 0x3a000    0x3a000    com.insanelymac.RealtekRTL8111 (1.2.3) <50 12 5 4 3 1>




Realtek RTL8168B/8111B PCI Express Gigabit Ethernet:

  Name:    ethernet
  Type:    Ethernet Controller
  Bus:    PCI
  Vendor ID:    0x10ec
  Device ID:    0x8136
  Subsystem Vendor ID:    0x103c
  Subsystem ID:    0x184a
  Revision ID:    0x0005
  Link Width:    x1
  BSD name:    en0
  Kext name:    RealtekRTL8111.kext
  Location:    /System/Library/Extensions/RealtekRTL8111.kext
  Version:    1.2.3

The cable for Ethernet is connected, but your computer does not have an IP address.

[grexai926]

Try to set duallink to 0

What Ati config have you tried?

[shrex23]

Using Ati configs via clover doesn't seem to be making a difference.

It's picking up Pondweed, which is correct (i think on it's own but only 4mb vram and no qe/ci).

 

Dual link = 0 doesn't help too much.

This way of booting works every time, but no qe/ci and 4mb vram.

 

Inject ATI for 7670M ticked

Load Vbios for 7670M ticked

[vusun123]

Using Ati configs via clover doesn't seem to be making a difference.

It's picking up Pondweed, which is correct (i think on it's own but only 4mb vram and no qe/ci).

 

Dual link = 0 doesn't help too much.

This way of booting works every time, but no qe/ci and 4mb vram.

 

Inject ATI for 7670M ticked

Load Vbios for 7670M ticked

Patch Pondweed FB to enable your card

[grexai926]

+ you should add in clover config the VRAM Size if you haven't added yet

[grexai926]

Try injecting your monitors EDID 
if edid is not enough than you will need custom edid
you have gradient issue, but do you have Qe? 

[edex96]

I installed "El Capitan" with Chameleon everything is fine except GPU.

 

I was able to activate my (0x6741, 0x05131025, CHIP_FAMILY_TURKS, "AMD Radeon HD 6650M") in mavericks by using (patched DSDT + patched kext). But the same method is not valid on this new release why?

 

a help would be great

 

here is  http://1drv.ms/1NfqFEs (darwin dump + clean AMD6000Controller.kext from El Capitan + vgabios dump +  clean dsdt + working patched dsdt + dpci screen shots)

 

 

 

[acero]

hi,

try Clover, it inject ati nicely without patching anything but no sleep working....

[ipurc]

hi guys,,, i was try its, but still blank screen,,

 

when i use clover and fakeid 6841_1002 my graphics was 1024MB and full QE/IC but doesn't display correctly(maybe gradient), ( i will upload the picture ) but, when i use fakeid and FB=Ipomoea/Pondweed it's stuck at blank screen after vorbose boot,, i was try use windows EDID and inject to clover, but still blank screen,

here's my editing of frambuffer Pondweed

02 00 00 00 40 00 00 00 09 01 00 00 10 00 01 02
00 08 00 00 04 02 00 00 00 01 00 00 11 02 02 01
10 00 00 00 10 00 00 00 00 01 00 00 00 10 03 03

 

here's a pic : https://www.dropbox....5904_o.jpg?dl=0

here's my bios : https://www.dropbox....h/BIOS.rar?dl=0