Kudo Posted February 25, 2012 Share Posted February 25, 2012 installed it, QE/CI working, video card detected properly via efi string (like in lion). Ethernet seems to not work, i have an efi string with display+lan combined (for app store to work), in lion i have no problem. i'll try later, now i have to go to work try to use the method you used in lion to get it work. No. I used a modified version of AppleIntelGMAX3100FB.kext to get QE/CI working in Lion. The kext, however, just does not provide QE/CI in 10.8. I can boot into the system, and the screen resolution is correct. But QE/CI is nowhere. Link to comment Share on other sites More sharing options...
thanh hoang Posted February 25, 2012 Share Posted February 25, 2012 I have problem, my cpu is P9600 2.67G, but i can booot with 32 bit, with 64 bit i get restart, any have, i thinks kernel not compatible with my CPU? any help, i used Chameleon r1822. Link to comment Share on other sites More sharing options...
zNuNoz Posted February 25, 2012 Share Posted February 25, 2012 I'm not sure what your issue is. I have Message working, It was enabled when I went through setup. Maybe you could use an iDevice to 'activate' it (Because I was using an iPod before this) and you may get lucky. I haven't tried facetime. I also have ALC 892 audio, and using the AppleHDA rollback through ###### enabled it natively without the buggieness of voodooHDA if you get white noise while using sound. Also, has anyone gotten QE/CI to work for an ATI Radeon 5670 1GB? Resolution is correct and EVERTHING else works.... This is all I need to fix. If anyone has a fix, let me know! Thanks in advance. Mine didn't work with ###### AppleHDA rollback, it works on lion, but not ML, so i went to a modified VoodooHDA kext that i found (guess it was on kext.com) and it work fine, no bug or noise, and even my S/PDIF is recognized. About the face time and message still no go, i use Message on my iPad, so i don't understand what you mean by "use an iDevice to 'activate' it", could you explain? Thanks Link to comment Share on other sites More sharing options...
NSCXP2005 Posted February 27, 2012 Share Posted February 27, 2012 Hi to all, Does anybody know how I can get past this KP? All the best, NSCXP2005 Link to comment Share on other sites More sharing options...
crazybirdy Posted February 28, 2012 Share Posted February 28, 2012 Hi to all, Does anybody know how I can get past this KP? All the best, NSCXP2005 Don't use kernel 10.7.0 for MLion...Just use the ML kernel. Link to comment Share on other sites More sharing options...
NSCXP2005 Posted February 28, 2012 Share Posted February 28, 2012 How do I get the ML kernel? All the best, NSCXP2005 Link to comment Share on other sites More sharing options...
crazybirdy Posted February 29, 2012 Share Posted February 29, 2012 How do I get the ML kernel? All the best, NSCXP2005 /mach_kernel on InstallESD.DMG of ML. Link to comment Share on other sites More sharing options...
NSCXP2005 Posted February 29, 2012 Share Posted February 29, 2012 So I would copy that to my OSX Lion partition and then installer ML and then I would be able to boot using the ML Kernel? Link to comment Share on other sites More sharing options...
crazybirdy Posted February 29, 2012 Share Posted February 29, 2012 So I would copy that to my OSX Lion partition and then installer ML and then I would be able to boot using the ML Kernel? The kernel on #211 is 10.7.0 for SL. You need to use... Darwin Kernel Version 10.x.0 on Snow Leopard partition Darwin Kernel Version 11.x.0 on Lion partition Darwin Kernel Version 12.x.0 on Mountain Lion partition Get /mach_kernel on InstallESD.DMG from Lion and ML. Link to comment Share on other sites More sharing options...
NSCXP2005 Posted February 29, 2012 Share Posted February 29, 2012 I have copied the kernel into the root of my now ML Drive. I used TransMac under Windows to copy it because I can't get in to ML still because of the errors. I can boot the Mach Kernel in Arch=i386 mode but it still gets them errors. Please can you advise me what to do. All the best, NSCXP2005 Link to comment Share on other sites More sharing options...
crazybirdy Posted March 1, 2012 Share Posted March 1, 2012 I have copied the kernel into the root of my now ML Drive. I used TransMac under Windows to copy it because I can't get in to ML still because of the errors. I can boot the Mach Kernel in Arch=i386 mode but it still gets them errors. Please can you advise me what to do. All the best, NSCXP2005 If you use ML kernel, it will not get #211 errors with 10.7.0 kernel. What's your bootloader and kexts? I don't know how you install the ML. Link to comment Share on other sites More sharing options...
NSCXP2005 Posted March 1, 2012 Share Posted March 1, 2012 Hi Crazybird, I successfully installed ML on my Laptop. I done a clean install. The only issue I have is that I can not get the Ethernet to work. My Ethernet is a Intel Pro 100 VE 8255. Do you or anybody here know if there is a Lion compatible kext? Thank you for your time. All the best, NSCXP2005 Link to comment Share on other sites More sharing options...
teshxx Posted March 3, 2012 Share Posted March 3, 2012 Hi Crazybird, I successfully installed ML on my Laptop. I done a clean install. The only issue I have is that I can not get the Ethernet to work. My Ethernet is a Intel Pro 100 VE 8255. Do you or anybody here know if there is a Lion compatible kext? Thank you for your time. All the best, NSCXP2005 Have you tried this ?? http://www.insanelymac.com/forum/index.php?showtopic=25477 Link to comment Share on other sites More sharing options...
DariosF Posted March 7, 2012 Share Posted March 7, 2012 Hi, guysss! I have a strange problem. Why, when I open Disk Utility to format the disk, I find only my SSD? I have four hard drive, but having an empty hard disk, I format it and install the 10.8 in there ... but don't show! It works only under a MBR partition? Link to comment Share on other sites More sharing options...
amador Posted March 9, 2012 Share Posted March 9, 2012 Would you mind sharing your guide and kexts you use. this is the only post that uses C2D cpu. most of the posted query uses i5 & i7. i'm sure that theres alot of us here still uses C2D cpu. looking forward reading your guide soon. thanks Everything Works here: Just one problem: System sleep works perfect, but until system sleep monitor doesen't enter in standby mode, just freezes.... Everything works just via DSDT, Chameleon (System from Signature) Also patched AppleRTC. Any solution to fix monitor standby mode? Link to comment Share on other sites More sharing options...
Kynyo Posted March 10, 2012 Share Posted March 10, 2012 Would you mind sharing your guide and kexts you use. this is the only post that uses C2D cpu. most of the posted query uses i5 & i7. i'm sure that theres alot of us here still uses C2D cpu. looking forward reading your guide soon. thanks It's just a simple installation by mounting, restoring Install ESD image, and re-copy Packages folder and kernel like in OS X 10.7 Lion DP1, copying chimera 1.8 bootloader and fakeSMC over usb, and followed by use of 2 kexts (just for Audio and Network). The rest is functioning properly via my own DSDT and Chimera 1.8! Everything it can be done with some knowledgment and patience. There are also a lot of tut in the forum. I think you've got the point! Peace, Link to comment Share on other sites More sharing options...
Recommended Posts