Blah101 Posted February 19, 2012 Share Posted February 19, 2012 Pl help with this kernel panic What worked for me was deleting the kexts, not the dependencies, from the installation drive. Make a backup incase that doesn't work. See if that helps. Link to comment Share on other sites More sharing options...
daniesy Posted February 19, 2012 Share Posted February 19, 2012 Any suggestions for enabling sound and network on Gigabyte P67 motherboard? For anyone with ApplePolicy kernel panic, try putting the smbios in the extras folder on the usb, instead of deleting that kext. It worked for me. Link to comment Share on other sites More sharing options...
ikingblack Posted February 19, 2012 Share Posted February 19, 2012 Any way to enable full QE/CI on 9800 GT? I get full res but not real graphics. Chameleon detects it with 14 MB ram, but I have 512. Link to comment Share on other sites More sharing options...
dougaa Posted February 20, 2012 Share Posted February 20, 2012 Any way to enable full QE/CI on 9800 GT? I get full res but not real graphics. Chameleon detects it with 14 MB ram, but I have 512. I happen to also have a 9800 GT, although it has 1GB, and Chameleon didn't work for me either. Instead you can add device-properties and an EFI string to org.chameleon.Boot.plist. I used: <key>device-properties</key> <string>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</string> I generated it using OSX86Tools, and it would let you generate your own string specifying 512MB. Link to comment Share on other sites More sharing options...
mnfesq Posted February 20, 2012 Share Posted February 20, 2012 So I was able to prepare a HD with the installer and Chamaleon. The system boots fine and starts to load however I get stuck on "Still waiting for root device". I have tried with and without boot flags, SMBIOS.plist, DSDT/NullCPUPowerManagement. No matter what I try I will always get stuck at the same spot. Normally installing OS X DPs have been easy, since I have a real iMac. However Apple pulled a fast one and iMac5,1 is not supported by ML. My system specs are in my signature (and are current). What am I missing? Your boot-up looks pretty similar to mine (also have "waiting for root device" problems). Did you say your installation drive is a hard drive? I am trying to boot up from a usb flash drive and I thought my problem might be USB related since I got the same USB errors that you have. My system can find the root device when I boot with arch=i386. How about you? Link to comment Share on other sites More sharing options...
MixUnix Posted February 20, 2012 Share Posted February 20, 2012 I installed ML with 10.7 method, using Chameleon 1820. 1819 didn't work. I started with Chameleon on an USB Key with DSDT/org.chameleon.boot.plist as MP3.1, and booted single user. Mac OS X Base System was on another USB Stick with FakeSMC in. I installed FakeSMC.kext and exit Mac OS X BaseSystem started and went till the end. FakeSMC in S/L/E, all went right and login after reboot. 10.8 woke up ! QE/CI/AUDIO/BT/WiFi/LAN = OK AppleHDA+LegacyHDA+HDAEnabler 885/889a RealtekRTL81xx PXHCD All kexts in S/L/E with Kext Utility for Lion 2.5.0b. UseKernelCache=Yes GraphicsEnabler=Yes Link to comment Share on other sites More sharing options...
jazzyguy Posted February 20, 2012 Share Posted February 20, 2012 Using Kernel Cache seems to be a problem for me. Anyone else? Link to comment Share on other sites More sharing options...
M0rpheus Posted February 20, 2012 Share Posted February 20, 2012 After patching the AppleRTC.kext, I now have sleep working. However, 2 of my HDD's (I believe they're in SATA ports 3 and 4) eject themselves after waking up from sleep. Link to comment Share on other sites More sharing options...
Audiomobile Posted February 20, 2012 Share Posted February 20, 2012 Mine hangs at this screen. any sugestions? Compal nblb2 Core i5 520M , Radeon 5650M , Link to comment Share on other sites More sharing options...
cobra4014 Posted February 20, 2012 Share Posted February 20, 2012 Well, after going off of basic knowledge from Snow Leopard, Lion, and now this, I have booted it with audio, Ethernet, and no QE/CI (ARGHHHH) Still working on that. I used the steps from User_1, and the tutorial link in another thread. + Some of my other stuff. I'll upload my extra folder if anyone wants it (with fake SMC and etc). I'm happy with it. The only problem is the lack of graphics acceleration. I'm using the ATI Radeon 5670 1GB. If anyone has a potential fix for it, I would really appreciate it. Link to comment Share on other sites More sharing options...
MixUnix Posted February 20, 2012 Share Posted February 20, 2012 Mine hangs at this screen. any sugestions? Compal nblb2 Core i5 520M , Radeon 5650M , Lack of FakeSMC.kext or not loaded Link to comment Share on other sites More sharing options...
ikingblack Posted February 20, 2012 Share Posted February 20, 2012 How would you go about patching AppleRTC to enable sleep? It is dependent on the motherboard, or universal? Link to comment Share on other sites More sharing options...
Bansaku Posted February 20, 2012 Share Posted February 20, 2012 SUCCESS! What I was doing wrong was using an internal SATA drive when the guide calls for a USB drive. So I dug up my external USB drive, cloned the internal drive, restarted and viola!! Now I am happy! No problems thus far. Link to comment Share on other sites More sharing options...
Audiomobile Posted February 20, 2012 Share Posted February 20, 2012 thanx a lot mixunix. worked perfect Link to comment Share on other sites More sharing options...
Marombeiro Posted February 21, 2012 Share Posted February 21, 2012 I have the same problem on my hack... installation went fine, but when i select the machd with mt lion on for the first boot, it just reboots, no kp, just reboots... im using the latest chamelon version... Work fine for me now, with flag " arch-i386 " Link to comment Share on other sites More sharing options...
parcival39 Posted February 21, 2012 Share Posted February 21, 2012 hi all, need help with a 9600GT 0x0622 and Chameleon_2.1svn_r1820_trunk_10.8. EFI string on org.chameleon.Boot.plist not work, also tested with NVDANV50Hal.kext from 10.7.0, but all this works on 10.7.3 (chameleon 2.0Rc5). Nvidia kext loaded in MT-Lion, but only 1024 x 768 screen resolution and one screen. any idea thx parcival Link to comment Share on other sites More sharing options...
flip360 Posted February 21, 2012 Share Posted February 21, 2012 hi all, need help with a 9600GT 0x0622 and Chameleon_2.1svn_r1820_trunk_10.8. EFI string on org.chameleon.Boot.plist not work, also tested with NVDANV50Hal.kext from 10.7.0, but all this works on 10.7.3 (chameleon 2.0Rc5). Nvidia kext loaded in MT-Lion, but only 1024 x 768 screen resolution and one screen. any idea thx parcival i have the 9600GT 1Gb working here full QE/CI enabled. I use Chameleon`s graphic enabler. Link to comment Share on other sites More sharing options...
parcival39 Posted February 21, 2012 Share Posted February 21, 2012 Hi flip360, Thanks for the fast answer. Which version of Chameleon use you? Link to comment Share on other sites More sharing options...
Kynyo Posted February 21, 2012 Share Posted February 21, 2012 Everything Works here: Just one problem: System sleep works perfect, but until system sleep monitor doesen't enter in standby mode, just freezes.... Everything works just via DSDT, Chameleon (System from Signature) Also patched AppleRTC. Any solution to fix monitor standby mode? 1 Link to comment Share on other sites More sharing options...
NSCXP2005 Posted February 21, 2012 Share Posted February 21, 2012 Is there anybody in this thread that has a Intel 950GMA chipset? I know it has been mentioned that Apple are dropping support for it, but does anybody have it working via DSDT? All the best, NSCXP2005 Link to comment Share on other sites More sharing options...
zNuNoz Posted February 22, 2012 Share Posted February 22, 2012 Just want to report that my GTX 580 is fully work with no edit need, just GraphicsEnabler=yes :wink2: Can't get my sound to work, ALC892. And can't add iCloud account/face time, any suggestions? Edit: -Manage to get my sound to work with VoodooHDA.kext. -iCloud now working with new smbios.plist (iMac12.2) and ethernet built in. -FaceTime and Message still don't work, if someone have an idea, ill appreciate. Link to comment Share on other sites More sharing options...
cobra4014 Posted February 23, 2012 Share Posted February 23, 2012 Just want to report that my GTX 580 is fully work with no edit need, just GraphicsEnabler=yes :wink2: Can't get my sound to work, ALC892. And can't add iCloud account/face time, any suggestions? Edit: -Manage to get my sound to work with VoodooHDA.kext. -iCloud now working with new smbios.plist (iMac12.2) and ethernet built in. -FaceTime and Message still don't work, if someone have an idea, ill appreciate. I'm not sure what your issue is. I have Message working, It was enabled when I went through setup. Maybe you could use an iDevice to 'activate' it (Because I was using an iPod before this) and you may get lucky. I haven't tried facetime. I also have ALC 892 audio, and using the AppleHDA rollback through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] enabled it natively without the buggieness of voodooHDA if you get white noise while using sound. Also, has anyone gotten QE/CI to work for an ATI Radeon 5670 1GB? Resolution is correct and EVERTHING else works.... This is all I need to fix. If anyone has a fix, let me know! Thanks in advance. Link to comment Share on other sites More sharing options...
HBP Posted February 23, 2012 Share Posted February 23, 2012 I boot correctly but when the screen appear it stay on a white screen with my mouse I can move. I have an HD6870 from sapphire and I use cartri's BIOS. then your FakeSMC.Kext isn't loading make sure it is in a location that is getting loaded, or put it in /S/L/E HBP Link to comment Share on other sites More sharing options...
orakanggo Posted February 23, 2012 Share Posted February 23, 2012 I have a problem about the installation process which suddenly freeze always when time remaining shown 5 minutes.. any solutions?? Link to comment Share on other sites More sharing options...
Flashe Posted February 24, 2012 Share Posted February 24, 2012 i have the 9600GT 1Gb working here full QE/CI enabled. I use Chameleon`s graphic enabler. Hello everyone @flip360 i use graphics enabler=yes since léopard or snow léopard but with ML this option in org.chameleon.Boot.plist don't work for working full QE/CI. You are sure QE/CI working for you ? flip360 try this dvd player if work. Link to comment Share on other sites More sharing options...
Recommended Posts