Peter_sm Posted August 12, 2012 Share Posted August 12, 2012 You need FAN device in SMCD look at Kozlek answer on my post few pages ago in bottom Thanks, but no luck , got a few errors, but it would be so nice if this could manage to work, I attach my DSDT file if some one could look into this, perhaps it can be fixed? @ kozlek Maybe its need some coding in your software.... ? BR Peter DSDT.aml.zip Link to comment Share on other sites More sharing options...
kozlek Posted August 14, 2012 Author Share Posted August 14, 2012 Thanks, but no luck , got a few errors, but it would be so nice if this could manage to work, I attach my DSDT file if some one could look into this, perhaps it can be fixed? @ kozlek Maybe its need some coding in your software.... ? BR Peter It's need specific ACPI coding and testing. Try to look in projectosx forums about ACPISensors maybe you'll found something usefull. For those who have nVidia cards, please test latest NouveauSensors and show me your kernel log. I have ported i2c base from nouveau driver. There is no monitoring feature in it for now. I need to test how i2c base works in general before I start to port monitoring drivers. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 14, 2012 Share Posted August 14, 2012 joshhh & TH3L4UGH1NGM4N thanks Link to comment Share on other sites More sharing options...
tot318 Posted August 14, 2012 Share Posted August 14, 2012 It's need specific ACPI coding and testing. Try to look in projectosx forums about ACPISensors maybe you'll found something usefull. For those who have nVidia cards, please test latest NouveauSensors and show me your kernel log. I have ported i2c base from nouveau driver. There is no monitoring feature in it for now. I need to test how i2c base works in general before I start to port monitoring drivers. Here is my kernel log for v1.0.67 Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 vm_page_bootstrap: 6119954 free pages and 138734 wired pages kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled AppleACPICPU: ProcessorId=9 LocalApicId=136 Disabled AppleACPICPU: ProcessorId=10 LocalApicId=137 Disabled AppleACPICPU: ProcessorId=11 LocalApicId=138 Disabled AppleACPICPU: ProcessorId=12 LocalApicId=139 Disabled AppleACPICPU: ProcessorId=13 LocalApicId=140 Disabled AppleACPICPU: ProcessorId=14 LocalApicId=141 Disabled AppleACPICPU: ProcessorId=15 LocalApicId=142 Disabled AppleACPICPU: ProcessorId=16 LocalApicId=143 Disabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 IOAPIC: Version 0x20 Vectors 88:111 ACPI: System State [s0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf10000000, 0xf0000000 [ PCI configuration begin ] RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. FakeSMCDevice: 22 preconfigured key(s) added SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x1a, stepping 0x4, cores 4, threads 8, TJmax 100 PCI configuration changed (bridge=6 device=3 cardbus=0) [ PCI configuration end, bridges 9 devices 22 ] mbinit: done [128 MB total pool size, (85/42) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 45DA2195-0C92-3235-A6FD-5BD31AFFDD0F Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> NouveauSensors: [card0] [Debug] memory mapped successfully NouveauSensors: [card0] [Debug] identifying the chipset NouveauSensors: [card0] [Debug] BOOT0 : 0x0a0100a2 NouveauSensors: [card0] chipset: G200 (NVA0) family: NV50 NouveauSensors: [card0] [Debug] crystal freq: 27000KHz NouveauSensors: [card0] [Debug] trying to shadow bios NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready [RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 ©2010-2011 by Lnx2Mac (lnx2mac@gmail.com) FireWire runtime power conservation disabled. (2) SuperIODevice: found Winbond W83667HG on port=0x2e address=0x290 W836xMonitor: started [RealtekRTL81xx:init] _logLevel is now 132 (0x0084) [RealtekRTL81xx:init] Using updated PHY config method [RealtekRTL81xx:init] init completed [RTL81xx@0xe800:rtl8168_init_board] NIC identified as RTL8168C/8111C (mcfg=5) NouveauSensors: [card0] [Debug] VBIOS appears to be valid NouveauSensors: [card0] VBIOS successfully read from PRAMIN NouveauSensors: [card0] [Debug] parsing BIOS NouveauSensors: [card0] VBIOS BIT signature found NouveauSensors: [card0] VBIOS version 62.00.1a.00 NouveauSensors: [card0] [Debug] initializing monitoring driver NouveauSensors: [card0] [Debug] parsing i2c dcb table NouveauSensors: [card0] [Debug] adding i2c port nouveau--0 NouveauSensors: [card0] [Debug] adding i2c port nouveau--1 NouveauSensors: [card0] [Debug] adding i2c port nouveau--2 NouveauSensors: [card0] [Debug] adding i2c port nouveau--3 NouveauSensors: [card0] [Debug] adding i2c port nouveau--4 NouveauSensors: [card0] [Debug] adding i2c port nouveau--5 NouveauSensors: [card0] [Debug] probing monitoring devices on bus: 5 NouveauSensors: [card0] [Debug] no devices found. NouveauSensors: [card0] [Debug] registering temperature sensors... NouveauSensors: [card0] [Debug] registering clocks sensors... NouveauSensors: [card0] [Debug] registering PWM sensors... NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] can't get pwm value NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] rpm fan sense gpio func not found NouveauSensors: [card0] [Debug] registering voltage sensors... NouveauSensors: [card0] started FireWire (OHCI) VendorID 1106 ID 3403 built-in now active, GUID 001e8c0001b23521; max speed s400. USBMSC Identifier (non-unique): 058F63626376 0x58f 0x6362 0x100 USBMSC Identifier (non-unique): 0x5e3 0x701 0x33 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT3@3/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD1002FAEX-00Y9A0 Media/IOGUIDPartitionScheme/LION@2 BSD root: disk3s2, major 1, minor 13 Kernel is LP64 com_lnx2mac_RealtekRTL81xx: Ethernet address 00:23:54:a5:3c:42 Previous Shutdown Cause: 0 HDAEnabler: Copyright © 2008 by Kabyl HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga NVDANV50HAL loaded and registered. [AppleBluetoothHCIControllerUSBTransport][start] -- completed Welcome to ControllerMate v4.6 (64-bit) DSMOS has arrived [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification [iOBluetoothHCIController][start] -- completed [iOBluetoothHCIController::setConfigState] calling registerService USBF: 11.214 AppleUSBEHCI[0xffffff802ee1a000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 2, EP: 1) No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 [AGPM Controller] build GPUDict by Vendor10deDevice05e2 AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA macx_swapon SUCCESS Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAWidget.cpp" at line 3794 goto handler Sound assertion "0 != widget->setUnsolicited ( true )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDACodecGeneric.cpp" at line 1099 goto handler Sandbox: sandboxd(145) deny mach-lookup com.apple.coresymbolicationd coreaudiod (map: 0xffffff802fe0f2b8) triggered DYLD shared region unnest for map: 0xffffff802fe0f2b8, region 0x7fff88e00000->0x7fff89000000. While not abnormal for debuggers, this increases system memory footprint until the target exits. System Preferenc (map: 0xffffff802f1ba220) triggered DYLD shared region unnest for map: 0xffffff802f1ba220, region 0x7fff88e00000->0x7fff89000000. While not abnormal for debuggers, this increases system memory footprint until the target exits. CODE SIGNING: cs_invalid_page(0x1000): p=281[GoogleSoftwareUp] clearing CS_VALID No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Finder (map: 0xffffff8030f8b4d8) triggered DYLD shared region unnest for map: 0xffffff8030f8b4d8, region 0x7fff8ac00000->0x7fff8ae00000. While not abnormal for debuggers, this increases system memory footprint until the target exits. Link to comment Share on other sites More sharing options...
voll@ Posted August 14, 2012 Share Posted August 14, 2012 It's need specific ACPI coding and testing. Try to look in projectosx forums about ACPISensors maybe you'll found something usefull. For those who have nVidia cards, please test latest NouveauSensors and show me your kernel log. I have ported i2c base from nouveau driver. There is no monitoring feature in it for now. I need to test how i2c base works in general before I start to port monitoring drivers. Boot-Messages.txt Link to comment Share on other sites More sharing options...
nekonoko Posted August 15, 2012 Share Posted August 15, 2012 Here's mine, GTX580: boot.txt Link to comment Share on other sites More sharing options...
The Real Deal Posted August 15, 2012 Share Posted August 15, 2012 For those who have nVidia cards, please test latest NouveauSensors and show me your kernel log. I have ported i2c base from nouveau driver. There is no monitoring feature in it for now. I need to test how i2c base works in general before I start to port monitoring drivers. NouveauSensors version 2.0.3 : Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] memory mapped successfully Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] identifying the chipset Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] BOOT0 : 0x0c8000a1 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] chipset: GF110 (NVC8) family: NVC0 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] crystal freq: 27000KHz Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] trying to shadow bios Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] VBIOS appears to be valid Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] VBIOS successfully read from PRAMIN Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] parsing BIOS Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] VBIOS BIT signature found Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] VBIOS version 70.10.20.00 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] initializing monitoring driver Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] parsing i2c dcb table Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-57656-57656-0 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-57680-57680-1 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-57728-57728-2 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-57972-57972-5 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-59236-59236-6 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-59264-59264-7 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-59292-59292-8 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-59320-59320-9 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-0-0-10 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-1-1-11 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-2-2-12 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-3-3-13 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] probing monitoring devices on bus: 5 Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] no devices found. Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering temperature sensors... Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering clocks sensors... Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering PWM sensors... Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering voltage sensors... Aug 15 11:30:14 localhost kernel[0]: NouveauSensors: [card0] started But i have a monitoring GPU (see attached) I have noticed a difference with the GPU memory ; before in GStates 1 and 2 = 135 MHz and now 67 MHz reported. Hope this help. Link to comment Share on other sites More sharing options...
kozlek Posted August 15, 2012 Author Share Posted August 15, 2012 Thank you for reports. I've found couple of bugs in i2c module so it always reports no devices found. Anyway seems Fermi and Kepler cards has no (supported) integrated monitoring devices. What I need after the next revision is reports from GT/X2xx, gf9xxx cards owners. Link to comment Share on other sites More sharing options...
mitch_de Posted August 15, 2012 Share Posted August 15, 2012 @ kozlek: Is there an special NouveauSensors version for the debug ? I downloaded actual .zip from github with the binarys. Can i use that or must i use some other debug version. I have NV 9600 GT card running 10.8.1 Link to comment Share on other sites More sharing options...
tot318 Posted August 15, 2012 Share Posted August 15, 2012 Thank you for reports. I've found couple of bugs in i2c module so it always reports no devices found. Anyway seems Fermi and Kepler cards has no (supported) integrated monitoring devices. What I need after the next revision is reports from GT/X2xx, gf9xxx cards owners. Here is my boot log for v1.0.68, GTX260 Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 vm_page_bootstrap: 6119888 free pages and 138800 wired pages kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled AppleACPICPU: ProcessorId=9 LocalApicId=136 Disabled AppleACPICPU: ProcessorId=10 LocalApicId=137 Disabled AppleACPICPU: ProcessorId=11 LocalApicId=138 Disabled AppleACPICPU: ProcessorId=12 LocalApicId=139 Disabled AppleACPICPU: ProcessorId=13 LocalApicId=140 Disabled AppleACPICPU: ProcessorId=14 LocalApicId=141 Disabled AppleACPICPU: ProcessorId=15 LocalApicId=142 Disabled AppleACPICPU: ProcessorId=16 LocalApicId=143 Disabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 IOAPIC: Version 0x20 Vectors 88:111 ACPI: System State [s0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf10000000, 0xf0000000 [ PCI configuration begin ] RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. FakeSMCDevice: 22 preconfigured key(s) added SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x1a, stepping 0x4, cores 4, threads 8, TJmax 100 PCI configuration changed (bridge=6 device=3 cardbus=0) [ PCI configuration end, bridges 9 devices 22 ] mbinit: done [128 MB total pool size, (85/42) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 45DA2195-0C92-3235-A6FD-5BD31AFFDD0F Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> NouveauSensors: [card0] [Debug] memory mapped successfully NouveauSensors: [card0] [Debug] identifying the chipset NouveauSensors: [card0] [Debug] BOOT0 : 0x0a0100a2 NouveauSensors: [card0] chipset: G200 (NVA0) family: NV50 NouveauSensors: [card0] [Debug] crystal freq: 27000KHz NouveauSensors: [card0] [Debug] trying to shadow bios NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready [RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 ©2010-2011 by Lnx2Mac (lnx2mac@gmail.com) FireWire runtime power conservation disabled. (2) SuperIODevice: found Winbond W83667HG on port=0x2e address=0x290 W836xMonitor: started [RealtekRTL81xx:init] _logLevel is now 132 (0x0084) [RealtekRTL81xx:init] Using updated PHY config method [RealtekRTL81xx:init] init completed [RTL81xx@0xe800:rtl8168_init_board] NIC identified as RTL8168C/8111C (mcfg=5) NouveauSensors: [card0] [Debug] VBIOS appears to be valid NouveauSensors: [card0] VBIOS successfully read from PRAMIN NouveauSensors: [card0] [Debug] parsing BIOS NouveauSensors: [card0] VBIOS BIT signature found NouveauSensors: [card0] VBIOS version 62.00.1a.00 NouveauSensors: [card0] [Debug] initializing monitoring driver NouveauSensors: [card0] [Debug] parsing i2c dcb table NouveauSensors: [card0] [Debug] adding i2c port nouveau-57656-57656-0 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57680-57680-1 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57704-57704-2 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57728-57728-3 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57940-57940-4 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57972-57972-5 NouveauSensors: [card0] [Debug] probing monitoring devices on bus: 5 NouveauI2C: master_xfer[0] W, addr=0x2d, len=1 master_xfer[1] R, addr=0x2d, len=1 NouveauI2C: master_xfer[0] W, addr=0x2d, len=1 master_xfer[1] R, addr=0x2d, len=1 NouveauI2C: master_xfer[0] W, addr=0x2e, len=1 master_xfer[1] R, addr=0x2e, len=1 NouveauI2C: master_xfer[0] W, addr=0x2e, len=1 master_xfer[1] R, addr=0x2e, len=1 NouveauI2C: master_xfer[0] W, addr=0x4c, len=1 master_xfer[1] R, addr=0x4c, len=1 NouveauSensors: [card0] [Debug] no devices found. NouveauSensors: [card0] [Debug] registering temperature sensors... NouveauSensors: [card0] [Debug] registering clocks sensors... NouveauSensors: [card0] [Debug] registering PWM sensors... NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] can't get pwm value NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] rpm fan sense gpio func not found NouveauSensors: [card0] [Debug] registering voltage sensors... NouveauSensors: [card0] started FireWire (OHCI) VendorID 1106 ID 3403 built-in now active, GUID 001e8c0001b23521; max speed s400. USBMSC Identifier (non-unique): 058F63626376 0x58f 0x6362 0x100 USBMSC Identifier (non-unique): 0x5e3 0x701 0x33 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT3@3/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD1002FAEX-00Y9A0 Media/IOGUIDPartitionScheme/LION@2 BSD root: disk3s2, major 1, minor 13 Kernel is LP64 com_lnx2mac_RealtekRTL81xx: Ethernet address 00:23:54:a5:3c:42 Previous Shutdown Cause: 0 HDAEnabler: Copyright © 2008 by Kabyl HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga [AppleBluetoothHCIControllerUSBTransport][start] -- completed NVDANV50HAL loaded and registered. Welcome to ControllerMate v4.6 (64-bit) DSMOS has arrived [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification [iOBluetoothHCIController][start] -- completed [iOBluetoothHCIController::setConfigState] calling registerService [AGPM Controller] build GPUDict by Vendor10deDevice05e2 AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA USBF: 11.218 AppleUSBEHCI[0xffffff802ed1a000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 2, EP: 1) No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 macx_swapon SUCCESS Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAWidget.cpp" at line 3794 goto handler Sound assertion "0 != widget->setUnsolicited ( true )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDACodecGeneric.cpp" at line 1099 goto handler Sandbox: sandboxd(156) deny mach-lookup com.apple.coresymbolicationd coreaudiod (map: 0xffffff802ff1d138) triggered DYLD shared region unnest for map: 0xffffff802ff1d138, region 0x7fff8ba00000->0x7fff8bc00000. While not abnormal for debuggers, this increases system memory footprint until the target exits. System Preferenc (map: 0xffffff802ff1c2b8) triggered DYLD shared region unnest for map: 0xffffff802ff1c2b8, region 0x7fff8ba00000->0x7fff8bc00000. While not abnormal for debuggers, this increases system memory footprint until the target exits. CODE SIGNING: cs_invalid_page(0x1000): p=299[GoogleSoftwareUp] clearing CS_VALID No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Finder (map: 0xffffff80313d9308) triggered DYLD shared region unnest for map: 0xffffff80313d9308, region 0x7fff8d600000->0x7fff8d800000. While not abnormal for debuggers, this increases system memory footprint until the target exits. Link to comment Share on other sites More sharing options...
kozlek Posted August 15, 2012 Author Share Posted August 15, 2012 There is new development revision with more debug messages available on GitHub. Link to comment Share on other sites More sharing options...
kirasir Posted August 15, 2012 Share Posted August 15, 2012 Натан, у вас предупреждение вылезает AppDelegate.m в 657 строке если заменить на setStringValue: вместо setTitleWithMnemonic:, то все приходит в норму. И еще по мелочи — ЗначОк, а не Значек Перепутаны сенсоры — северный мост это не северный мост, а вполне себе Крышка ЦП (это то что показывает любой биос) Соответственно Радиатор ЦП (почему радиатор? это обычная крышка) — это системный чипсет (тоже показывает любой биос) Если не сложно то замените совместимость фейка на что-то более современное, макпро3 морально устарел. Очень обидно вместо нормального набора с подписью, ковырять и исправлять мелочи и получать неподписанный самосбор. Там еще по мелочи в ключах ошибки, но это в плисте правится и после компиляции. И нельзя ли добавить для наглядности график множителей. Заранее благодарен. Link to comment Share on other sites More sharing options...
tot318 Posted August 15, 2012 Share Posted August 15, 2012 There is new development revision with more debug messages available on GitHub. Boot log for v1.0.69 Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 vm_page_bootstrap: 6119965 free pages and 138723 wired pages kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled AppleACPICPU: ProcessorId=9 LocalApicId=136 Disabled AppleACPICPU: ProcessorId=10 LocalApicId=137 Disabled AppleACPICPU: ProcessorId=11 LocalApicId=138 Disabled AppleACPICPU: ProcessorId=12 LocalApicId=139 Disabled AppleACPICPU: ProcessorId=13 LocalApicId=140 Disabled AppleACPICPU: ProcessorId=14 LocalApicId=141 Disabled AppleACPICPU: ProcessorId=15 LocalApicId=142 Disabled AppleACPICPU: ProcessorId=16 LocalApicId=143 Disabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 IOAPIC: Version 0x20 Vectors 88:111 ACPI: System State [s0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf10000000, 0xf0000000 [ PCI configuration begin ] RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. FakeSMCDevice: 22 preconfigured key(s) added SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x1a, stepping 0x4, cores 4, threads 8, TJmax 100 PCI configuration changed (bridge=6 device=3 cardbus=0) [ PCI configuration end, bridges 9 devices 22 ] mbinit: done [128 MB total pool size, (85/42) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 45DA2195-0C92-3235-A6FD-5BD31AFFDD0F Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready NouveauSensors: [card0] [Debug] memory mapped successfully NouveauSensors: [card0] [Debug] identifying the chipset NouveauSensors: [card0] [Debug] BOOT0 : 0x0a0100a2 NouveauSensors: [card0] chipset: G200 (NVA0) family: NV50 NouveauSensors: [card0] [Debug] crystal freq: 27000KHz NouveauSensors: [card0] [Debug] trying to shadow bios NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN [RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 ©2010-2011 by Lnx2Mac (lnx2mac@gmail.com) FireWire runtime power conservation disabled. (2) SuperIODevice: found Winbond W83667HG on port=0x2e address=0x290 W836xMonitor: started [RealtekRTL81xx:init] _logLevel is now 132 (0x0084) [RealtekRTL81xx:init] Using updated PHY config method [RealtekRTL81xx:init] init completed [RTL81xx@0xe800:rtl8168_init_board] NIC identified as RTL8168C/8111C (mcfg=5) NouveauSensors: [card0] [Debug] VBIOS appears to be valid NouveauSensors: [card0] VBIOS successfully read from PRAMIN NouveauSensors: [card0] [Debug] parsing BIOS NouveauSensors: [card0] VBIOS BIT signature found NouveauSensors: [card0] VBIOS version 62.00.1a.00 NouveauSensors: [card0] [Debug] initializing monitoring driver NouveauSensors: [card0] [Debug] parsing i2c dcb table NouveauSensors: [card0] [Debug] adding i2c port nouveau-e138-e138-0 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e150-e150-1 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e168-e168-2 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e180-e180-3 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e254-e254-4 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e274-e274-5 NouveauSensors: [card0] [Debug] probing monitoring devices on bus: 5 NouveauSensors: i2c_transfer=0 NouveauSensors: i2c_transfer=0 NouveauSensors: i2c_transfer=0 NouveauSensors: i2c_transfer=0 NouveauSensors: i2c_transfer=0 NouveauSensors: [card0] [Debug] no devices found. NouveauSensors: [card0] [Debug] registering temperature sensors... NouveauSensors: [card0] [Debug] registering clocks sensors... NouveauSensors: [card0] [Debug] registering PWM sensors... NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] can't get pwm value NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] rpm fan sense gpio func not found NouveauSensors: [card0] [Debug] registering voltage sensors... NouveauSensors: [card0] started FireWire (OHCI) VendorID 1106 ID 3403 built-in now active, GUID 001e8c0001b23521; max speed s400. USBMSC Identifier (non-unique): 058F63626376 0x58f 0x6362 0x100 USBMSC Identifier (non-unique): 0x5e3 0x701 0x33 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT3@3/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD1002FAEX-00Y9A0 Media/IOGUIDPartitionScheme/LION@2 BSD root: disk3s2, major 1, minor 13 Kernel is LP64 com_lnx2mac_RealtekRTL81xx: Ethernet address 00:23:54:a5:3c:42 Previous Shutdown Cause: 0 HDAEnabler: Copyright © 2008 by Kabyl HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga NVDANV50HAL loaded and registered. [AppleBluetoothHCIControllerUSBTransport][start] -- completed Welcome to ControllerMate v4.6 (64-bit) DSMOS has arrived [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification [iOBluetoothHCIController][start] -- completed [iOBluetoothHCIController::setConfigState] calling registerService [AGPM Controller] build GPUDict by Vendor10deDevice05e2 AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 macx_swapon SUCCESS Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAWidget.cpp" at line 3794 goto handler Sound assertion "0 != widget->setUnsolicited ( true )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDACodecGeneric.cpp" at line 1099 goto handler Sandbox: sandboxd(155) deny mach-lookup com.apple.coresymbolicationd coreaudiod (map: 0xffffff802fd21790) triggered DYLD shared region unnest for map: 0xffffff802fd21790, region 0x7fff87400000->0x7fff87600000. While not abnormal for debuggers, this increases system memory footprint until the target exits. System Preferenc (map: 0xffffff802f172220) triggered DYLD shared region unnest for map: 0xffffff802f172220, region 0x7fff87400000->0x7fff87600000. While not abnormal for debuggers, this increases system memory footprint until the target exits. Link to comment Share on other sites More sharing options...
kozlek Posted August 15, 2012 Author Share Posted August 15, 2012 Boot log for v1.0.69 Something wrong here, where is no trace messages like this: 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Warning] voltage table 0x50 unknown16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Debug] probing monitoring devices on bus: 5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_start=0 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_put_byte=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: i2c_transfer=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_start=0 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_put_byte=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: i2c_transfer=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_start=0 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_put_byte=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: i2c_transfer=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_start=0 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_put_byte=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: i2c_transfer=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_start=0 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Trace] i2c_put_byte=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: i2c_transfer=-5 16.08.12 0:04:46,000 kernel[0]: NouveauSensors: [card0] [Debug] no devices found. Try to reboot your computer. Link to comment Share on other sites More sharing options...
tot318 Posted August 15, 2012 Share Posted August 15, 2012 Something wrong here, where is no trace messages like this: Try to reboot your computer. Ok boot log after reboot Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 vm_page_bootstrap: 6119914 free pages and 138774 wired pages kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled AppleACPICPU: ProcessorId=9 LocalApicId=136 Disabled AppleACPICPU: ProcessorId=10 LocalApicId=137 Disabled AppleACPICPU: ProcessorId=11 LocalApicId=138 Disabled AppleACPICPU: ProcessorId=12 LocalApicId=139 Disabled AppleACPICPU: ProcessorId=13 LocalApicId=140 Disabled AppleACPICPU: ProcessorId=14 LocalApicId=141 Disabled AppleACPICPU: ProcessorId=15 LocalApicId=142 Disabled AppleACPICPU: ProcessorId=16 LocalApicId=143 Disabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 IOAPIC: Version 0x20 Vectors 88:111 ACPI: System State [s0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf10000000, 0xf0000000 [ PCI configuration begin ] RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. FakeSMCDevice: 22 preconfigured key(s) added SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x1a, stepping 0x4, cores 4, threads 8, TJmax 100 PCI configuration changed (bridge=6 device=3 cardbus=0) [ PCI configuration end, bridges 9 devices 22 ] mbinit: done [128 MB total pool size, (85/42) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 45DA2195-0C92-3235-A6FD-5BD31AFFDD0F Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeZlib kmod start NouveauSensors: [card0] [Debug] memory mapped successfully NouveauSensors: [card0] [Debug] identifying the chipset NouveauSensors: [card0] [Debug] BOOT0 : 0x0a0100a2 NouveauSensors: [card0] chipset: G200 (NVA0) family: NV50 NouveauSensors: [card0] [Debug] crystal freq: 27000KHz NouveauSensors: [card0] [Debug] trying to shadow bios NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready [RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 ©2010-2011 by Lnx2Mac (lnx2mac@gmail.com) FireWire runtime power conservation disabled. (2) SuperIODevice: found Winbond W83667HG on port=0x2e address=0x290 W836xMonitor: started [RealtekRTL81xx:init] _logLevel is now 132 (0x0084) [RealtekRTL81xx:init] Using updated PHY config method [RealtekRTL81xx:init] init completed [RTL81xx@0xe800:rtl8168_init_board] NIC identified as RTL8168C/8111C (mcfg=5) NouveauSensors: [card0] [Debug] VBIOS appears to be valid NouveauSensors: [card0] VBIOS successfully read from PRAMIN NouveauSensors: [card0] [Debug] parsing BIOS NouveauSensors: [card0] VBIOS BIT signature found NouveauSensors: [card0] VBIOS version 62.00.1a.00 NouveauSensors: [card0] [Debug] initializing monitoring driver NouveauSensors: [card0] [Debug] parsing i2c dcb table NouveauSensors: [card0] [Debug] adding i2c port nouveau-e138-e138-0 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e150-e150-1 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e168-e168-2 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e180-e180-3 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e254-e254-4 NouveauSensors: [card0] [Debug] adding i2c port nouveau-e274-e274-5 NouveauSensors: [card0] [Debug] probing monitoring devices on bus: 5 NouveauSensors: [card0] [Trace] i2c_start=0 NouveauSensors: [card0] [Trace] i2c_put_byte=-5 NouveauSensors: i2c_transfer=-5 NouveauSensors: [card0] [Trace] i2c_start=0 NouveauSensors: [card0] [Trace] i2c_put_byte=-5 NouveauSensors: i2c_transfer=-5 NouveauSensors: [card0] [Trace] i2c_start=0 NouveauSensors: [card0] [Trace] i2c_put_byte=-5 NouveauSensors: i2c_transfer=-5 NouveauSensors: [card0] [Trace] i2c_start=0 NouveauSensors: [card0] [Trace] i2c_put_byte=-5 NouveauSensors: i2c_transfer=-5 NouveauSensors: [card0] [Trace] i2c_start=0 NouveauSensors: [card0] [Trace] i2c_put_byte=-5 NouveauSensors: i2c_transfer=-5 NouveauSensors: [card0] [Debug] no devices found. NouveauSensors: [card0] [Debug] registering temperature sensors... NouveauSensors: [card0] [Debug] registering clocks sensors... NouveauSensors: [card0] [Debug] registering PWM sensors... NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] can't get pwm value NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] rpm fan sense gpio func not found NouveauSensors: [card0] [Debug] registering voltage sensors... NouveauSensors: [card0] started FireWire (OHCI) VendorID 1106 ID 3403 built-in now active, GUID 001e8c0001b23521; max speed s400. USBMSC Identifier (non-unique): 058F63626376 0x58f 0x6362 0x100 USBMSC Identifier (non-unique): 0x5e3 0x701 0x33 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT3@3/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD1002FAEX-00Y9A0 Media/IOGUIDPartitionScheme/LION@2 BSD root: disk3s2, major 1, minor 13 Kernel is LP64 com_lnx2mac_RealtekRTL81xx: Ethernet address 00:23:54:a5:3c:42 Previous Shutdown Cause: 0 HDAEnabler: Copyright © 2008 by Kabyl HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga [AppleBluetoothHCIControllerUSBTransport][start] -- completed NVDANV50HAL loaded and registered. Welcome to ControllerMate v4.6 (64-bit) DSMOS has arrived [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification [iOBluetoothHCIController][start] -- completed [iOBluetoothHCIController::setConfigState] calling registerService AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA [AGPM Controller] build GPUDict by Vendor10deDevice05e2 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 macx_swapon SUCCESS Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAWidget.cpp" at line 3794 goto handler Sound assertion "0 != widget->setUnsolicited ( true )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDACodecGeneric.cpp" at line 1099 goto handler Sandbox: sandboxd(147) deny mach-lookup com.apple.coresymbolicationd coreaudiod (map: 0xffffff802fde5f68) triggered DYLD shared region unnest for map: 0xffffff802fde5f68, region 0x7fff8d600000->0x7fff8d800000. While not abnormal for debuggers, this increases system memory footprint until the target exits. CODE SIGNING: cs_invalid_page(0x1000): p=233[GoogleSoftwareUp] clearing CS_VALID No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Finder (map: 0xffffff8030f1f960) triggered DYLD shared region unnest for map: 0xffffff8030f1f960, region 0x7fff8f400000->0x7fff8f600000. While not abnormal for debuggers, this increases system memory footprint until the target exits. System Preferenc (map: 0xffffff802fde6220) triggered DYLD shared region unnest for map: 0xffffff802fde6220, region 0x7fff8d600000->0x7fff8d800000. While not abnormal for debuggers, this increases system memory footprint until the target exits. Link to comment Share on other sites More sharing options...
Fabio1971 Posted August 17, 2012 Share Posted August 17, 2012 Hello kozlek I can explain. Last login: Fri Aug 17 07:42:00 on ttys000 localhost:~ fabio$ sudo dmesg Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 vm_page_bootstrap: 1520675 free pages and 43997 wired pages kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled AppleACPICPU: ProcessorId=9 LocalApicId=136 Disabled AppleACPICPU: ProcessorId=10 LocalApicId=137 Disabled AppleACPICPU: ProcessorId=11 LocalApicId=138 Disabled AppleACPICPU: ProcessorId=12 LocalApicId=139 Disabled AppleACPICPU: ProcessorId=13 LocalApicId=140 Disabled AppleACPICPU: ProcessorId=14 LocalApicId=141 Disabled AppleACPICPU: ProcessorId=15 LocalApicId=142 Disabled AppleACPICPU: ProcessorId=16 LocalApicId=143 Disabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 IOAPIC: Version 0x20 Vectors 88:111 ACPI: System State [s0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf10000000, 0xf0000000 [ PCI configuration begin ] RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: Turbo Ratios 1112 AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. FakeSMCDevice: 22 preconfigured key(s) added SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x1a, stepping 0x5, cores 4, threads 8, TJmax 100 PCI configuration changed (bridge=3 device=0 cardbus=0) [ PCI configuration end, bridges 8 devices 22 ] mbinit: done [64 MB total pool size, (42/21) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 4D03222A-E5B3-339B-9F7E-A5F9F23233B4 Waiting on IOProviderClassIOResourcesIOResourceMatchboot-uuid-media com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start NouveauSensors: [card0] [Debug] memory mapped successfully NouveauSensors: [card0] [Debug] identifying the chipset NouveauSensors: [card0] [Debug] BOOT0 : 0x0c0680a3 NouveauSensors: [card0] chipset: GF100 (NVC0) family: NVC0 NouveauSensors: [card0] [Debug] crystal freq: 27000KHz NouveauSensors: [card0] [Debug] trying to shadow bios NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/OCZ-AGILITY3 Media/IOGUIDPartitionScheme/Mountain Lion HD@2 BSD root: disk0s2, major 1, minor 2 SuperIODevice: found Winbond W83667HG on port=0x2e address=0x290 W836xMonitor: started Kernel is LP64 NouveauSensors: [card0] [Debug] VBIOS appears to be valid NouveauSensors: [card0] VBIOS successfully read from PRAMIN NouveauSensors: [card0] [Debug] parsing BIOS NouveauSensors: [card0] VBIOS BIT signature found NouveauSensors: [card0] VBIOS version 70.00.35.00 NouveauSensors: [card0] [Debug] initializing monitoring driver NouveauSensors: [card0] [Debug] parsing i2c dcb table NouveauSensors: [card0] [Debug] adding i2c port nouveau-57656-57656-0 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57680-57680-1 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57728-57728-2 NouveauSensors: [card0] [Debug] adding i2c port nouveau-57972-57972-5 NouveauSensors: [card0] [Debug] adding i2c port nouveau-59236-59236-6 NouveauSensors: [card0] [Debug] adding i2c port nouveau-59264-59264-7 NouveauSensors: [card0] [Debug] adding i2c port nouveau-59292-59292-8 NouveauSensors: [card0] [Debug] adding i2c port nouveau-59320-59320-9 NouveauSensors: [card0] [Debug] adding i2c port nouveau-0-0-10 NouveauSensors: [card0] [Debug] adding i2c port nouveau-1-1-11 NouveauSensors: [card0] [Debug] adding i2c port nouveau-2-2-12 NouveauSensors: [card0] [Debug] adding i2c port nouveau-3-3-13 NouveauSensors: [card0] [Debug] probing monitoring devices on bus: 5 NouveauI2C: master_xfer[0] W, addr=0x2d, len=1 master_xfer[1] R, addr=0x2d, len=1 NouveauI2C: master_xfer[0] W, addr=0x2d, len=1 master_xfer[1] R, addr=0x2d, len=1 NouveauI2C: master_xfer[0] W, addr=0x2e, len=1 master_xfer[1] R, addr=0x2e, len=1 NouveauI2C: master_xfer[0] W, addr=0x2e, len=1 master_xfer[1] R, addr=0x2e, len=1 NouveauI2C: master_xfer[0] W, addr=0x4c, len=1 master_xfer[1] R, addr=0x4c, len=1 NouveauSensors: [card0] [Debug] no devices found. NouveauSensors: [card0] [Debug] registering temperature sensors... NouveauSensors: [card0] [Debug] registering clocks sensors... NouveauSensors: [card0] [Debug] registering PWM sensors... NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] can't get pwm value FireWire (OHCI) VendorID 1106 ID 3044 built-in now active, GUID 001e8c0000e1af15; max speed s400. NouveauSensors: [card0] [Debug] registering voltage sensors... NouveauSensors: [card0] started Previous Shutdown Cause: 0 NVDAGF100HAL loaded and registered. DSMOS has arrived [iOBluetoothHCIController][start] -- completed [AGPM Controller] unknownPlatform AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA macx_swapon SUCCESS AppleYukon2: Marvell Yukon Gigabit Adapter 88E8056 Singleport Copper SA AppleYukon2: RxRingSize AppleYukon2: Marvell Yukon Gigabit Adapter 88E8056 Singleport Copper SA AppleYukon2: RxRingSize yukon: Ethernet address bc:ae:c5:32:65:42 yukon: Ethernet address bc:ae:c5:32:65:41 Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,6f48,0de1,0200,45e1,4000] NTFS driver 3.10 [Flags: R/W]. NTFS volume name , version 3.1. CODE SIGNING: cs_invalid_page(0x1000): p=268[GoogleSoftwareUp] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=318[ksadmin] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=319[ksadmin] clearing CS_VALID HFS: Vol: Firefox Very Low Disk: freeblks: 0, dangerlimit: 387 Sandbox: sandboxd(404) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(409) deny mach-lookup com.apple.coresymbolicationd CODE SIGNING: cs_invalid_page(0x1000): p=428[ksadmin] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=429[ksadmin] clearing CS_VALID localhost:~ fabio$ Thanks Fabio Link to comment Share on other sites More sharing options...
tot318 Posted August 17, 2012 Share Posted August 17, 2012 Boot log with the latest v1.0.70 Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 vm_page_bootstrap: 6119928 free pages and 138760 wired pages kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled AppleACPICPU: ProcessorId=9 LocalApicId=136 Disabled AppleACPICPU: ProcessorId=10 LocalApicId=137 Disabled AppleACPICPU: ProcessorId=11 LocalApicId=138 Disabled AppleACPICPU: ProcessorId=12 LocalApicId=139 Disabled AppleACPICPU: ProcessorId=13 LocalApicId=140 Disabled AppleACPICPU: ProcessorId=14 LocalApicId=141 Disabled AppleACPICPU: ProcessorId=15 LocalApicId=142 Disabled AppleACPICPU: ProcessorId=16 LocalApicId=143 Disabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 IOAPIC: Version 0x20 Vectors 88:111 ACPI: System State [s0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf10000000, 0xf0000000 RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. FakeSMCDevice: 22 preconfigured key(s) added SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x1a, stepping 0x4, cores 4, threads 8, TJmax 100 mbinit: done [128 MB total pool size, (85/42) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 9A4B92C8-FCB2-35FB-8534-10F67B9E9B52 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready [ PCI configuration begin ] PCI configuration changed (bridge=6 device=3 cardbus=0) [ PCI configuration end, bridges 9 devices 22 ] [RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 ©2010-2011 by Lnx2Mac (lnx2mac@gmail.com) NouveauSensors: [card0] [Debug] memory mapped successfully NouveauSensors: [card0] [Debug] identifying the chipset NouveauSensors: [card0] [Debug] BOOT0 : 0x0a0100a2 NouveauSensors: [card0] chipset: G200 (NVA0) family: NV50 NouveauSensors: [card0] [Debug] crystal freq: 27000KHz NouveauSensors: [card0] [Debug] trying to shadow bios NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN FireWire runtime power conservation disabled. (2) Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG3@3/IOPCI2PCIBridge/GFX3@0/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/INTEL SSDSC2CT060A3 Media/IOGUIDPartitionScheme/ML@2 BSD root: disk0s2, major 1, minor 2 Kernel is LP64 SuperIODevice: found Winbond W83667HG on port=0x2e address=0x290 W836xMonitor: started NouveauSensors: [card0] [Debug] VBIOS appears to be valid NouveauSensors: [card0] VBIOS successfully read from PRAMIN NouveauSensors: [card0] [Debug] parsing BIOS NouveauSensors: [card0] VBIOS BIT signature found NouveauSensors: [card0] VBIOS version 62.00.1a.00 NouveauSensors: [card0] [Debug] initializing monitoring driver NouveauSensors: [card0] [Debug] probing I2C busses... NouveauSensors: [card0] [Debug] bus: 1 device: a0 NouveauSensors: [card0] [Debug] bus: 1 device: 6e NouveauSensors: [card0] [Debug] bus: 2 device: a0 NouveauSensors: [card0] [Debug] bus: 2 device: 74 NouveauSensors: [card0] [Debug] bus: 2 device: 6e NouveauSensors: [card0] [Debug] bus: 3 device: 1a NouveauSensors: [card0] [Debug] registering temperature sensors... NouveauSensors: [card0] [Debug] registering clocks sensors... NouveauSensors: [card0] [Debug] registering PWM sensors... NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] can't get pwm value NouveauSensors: [card0] [Debug] can't find GPIO line NouveauSensors: [card0] [Debug] rpm fan sense gpio func not found NouveauSensors: [card0] [Debug] registering voltage sensors... NouveauSensors: [card0] started FireWire (OHCI) VendorID 1106 ID 3403 built-in now active, GUID 001e8c0001b23521; max speed s400. USBMSC Identifier (non-unique): 058F63626376 0x58f 0x6362 0x100 USBMSC Identifier (non-unique): 0x5e3 0x701 0x33 [RealtekRTL81xx:init] _logLevel is now 132 (0x0084) [RealtekRTL81xx:init] Using updated PHY config method [RealtekRTL81xx:init] init completed [RTL81xx@0xe800:rtl8168_init_board] NIC identified as RTL8168C/8111C (mcfg=5) No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 Previous Shutdown Cause: 0 HDAEnabler: Copyright © 2008 by Kabyl HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga NVDANV50HAL loaded and registered. Welcome to ControllerMate v4.6 (64-bit) [iOBluetoothHCIController][start] -- completed [AppleBluetoothHCIControllerUSBTransport][start] -- completed [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification Waiting for DSMOS... No interval found for . Using 8000000 No interval found for . Using 8000000 No interval found for . Using 8000000 [iOBluetoothHCIController::setConfigState] calling registerService DSMOS has arrived AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA [AGPM Controller] build GPUDict by Vendor10deDevice05e2 com_lnx2mac_RealtekRTL81xx: Ethernet address 00:23:54:a5:3c:42 USBF: 5.551 AppleUSBEHCI[0xffffff802ede8000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 2, EP: 1) macx_swapon SUCCESS Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAWidget.cpp" at line 3794 goto handler Sound assertion "0 != widget->setUnsolicited ( true )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDACodecGeneric.cpp" at line 1099 goto handler Sandbox: sandboxd(149) deny mach-lookup com.apple.coresymbolicationd coreaudiod (map: 0xffffff802f181e80) triggered DYLD shared region unnest for map: 0xffffff802f181e80, region 0x7fff92000000->0x7fff92200000. While not abnormal for debuggers, this increases system memory footprint until the target exits. System Preferenc (map: 0xffffff802f1813a0) triggered DYLD shared region unnest for map: 0xffffff802f1813a0, region 0x7fff92000000->0x7fff92200000. While not abnormal for debuggers, this increases system memory footprint until the target exits. Link to comment Share on other sites More sharing options...
The Real Deal Posted August 17, 2012 Share Posted August 17, 2012 Hey Kozlek, French port of HWMonitor fr.lproj.zip Link to comment Share on other sites More sharing options...
Peter_sm Posted August 18, 2012 Share Posted August 18, 2012 My log please look at these 2 Refusing new kext org.hwsensors.driver.NouveauSensors, v2.0.6: already have prelinked v1.0.3. SuperIODevice: [Warning] found unsupported ship ID=0xffff It should be nice to have the FAN activated, but I have no ide to fix that, haver tried the DSDT tips a few page back, but no luck. Also the Disc temperature would be nice to activate ;-) but don't know how to do that Refusing new kext org.hwsensors.driver.NouveauSensors, v2.0.6: already have prelinked v1.0.3. Aug 18 11:36:19 localhost kernel[0]: Refusing new kext org.hwsensors.driver.CPUSensors, v2.0: a prelinked copy with a different executable UUID is already present. Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled Aug 18 11:36:19 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled Aug 18 11:36:19 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet Aug 18 11:36:19 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet) Aug 18 11:36:19 localhost kernel[0]: calling mpo_policy_init for Sandbox Aug 18 11:36:19 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox) Aug 18 11:36:19 localhost kernel[0]: calling mpo_policy_init for Quarantine Aug 18 11:36:19 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine) Aug 18 11:36:19 localhost kernel[0]: Copyright © 1982, 1986, 1989, 1991, 1993 Aug 18 11:36:19 localhost kernel[0]: The Regents of the University of California. All rights reserved. Aug 18 11:36:19 localhost kernel[0]: MAC Framework successfully initialized Aug 18 11:36:19 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers Aug 18 11:36:19 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87 Aug 18 11:36:19 localhost kernel[0]: ACPI: System State [s0 S3 S4 S5] Aug 18 11:36:19 localhost kernel[0]: AppleSmartBatteryManager: Version 2011.0802 starting Aug 18 11:36:19 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000 Aug 18 11:36:19 localhost kernel[0]: [ PCI configuration begin ] Aug 18 11:36:19 localhost kernel[0]: AppleSmartBattery: Using ACPI extended battery information method _BIX Aug 18 11:36:19 localhost kernel[0]: AppleSmartBattery: Using ACPI extra battery information method BBIX Aug 18 11:36:19 localhost kernel[0]: PCI configuration changed (bridge=11 device=0 cardbus=0) Aug 18 11:36:19 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1169 Aug 18 11:36:19 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:39:51 Apr 9 2012) initialization complete Aug 18 11:36:19 localhost kernel[0]: RTC: Only single RAM bank (128 bytes) Aug 18 11:36:19 localhost kernel[0]: HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. Aug 18 11:36:19 localhost kernel[0]: FakeSMCDevice: 22 preconfigured key(s) added Aug 18 11:36:19 localhost kernel[0]: SMC: successfully initialized Aug 18 11:36:19 localhost kernel[0]: IntelThermal: CPU family 0x6, model 0x1e, stepping 0x5, cores 4, threads 8, TJmax 100 Aug 18 11:36:19 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split] Aug 18 11:36:19 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused Aug 18 11:36:19 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start Aug 18 11:36:19 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start Aug 18 11:36:19 localhost kernel[0]: [ PCI configuration end, bridges 7 devices 22 ] Aug 18 11:36:19 localhost kernel[0]: [ PCI configuration begin ] Aug 18 11:36:19 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded Aug 18 11:36:19 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded Aug 18 11:36:19 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready Aug 18 11:36:19 localhost kernel[0]: PCI configuration changed (bridge=11 device=0 cardbus=0) Aug 18 11:36:19 localhost kernel[0]: pci168c,2a cannot assert wake from D3cold Aug 18 11:36:19 localhost kernel[0]: [ PCI configuration end, bridges 8 devices 37 ] Aug 18 11:36:19 localhost kernel[0]: FireWire runtime power conservation disabled. (2) Aug 18 11:36:19 localhost kernel[0]: NouveauSensors: VBIOS successfully read from PRAMIN Aug 18 11:36:19 localhost kernel[0]: NouveauSensors: BIT VBIOS found Aug 18 11:36:19 localhost kernel[0]: SuperIODevice: [Warning] found unsupported ship ID=0xffff Aug 18 11:36:19 localhost kernel[0]: NouveauSensors: detected an NV50 generation card (0x0a5400a2) with 1024 Mib of DDR3 memory Aug 18 11:36:19 localhost kernel[0]: FireWire (OHCI) VendorID 197b ID 8023 built-in now active, GUID 00241b008268d201; max speed s400. Aug 18 11:36:19 localhost kernel[0]: [iOBluetoothHCIController::setConfigState] calling registerService Aug 18 11:36:19 localhost kernel[0]: USBMSC Identifier (non-unique): 43423531314D50463730 0xfce 0x3138 0x224 Aug 18 11:36:19 localhost kernel[0]: rooting via boot-uuid from /chosen: B7A852FA-B849-36B3-B43E-EF87DA562AF7 Aug 18 11:36:19 localhost kernel[0]: From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> Aug 18 11:36:19 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/pci8086,3b2f@1F,2/AppleIntelPchSeriesAHCI/PRT4@4/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK5056GSY Media/IOGUIDPartitionScheme/LION@2 Aug 18 11:36:19 localhost kernel[0]: BSD root: disk1s2, major 14, minor 7 Aug 18 11:36:19 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 11571712 to: 11724288 (joffset 0x460000) Aug 18 11:36:19 localhost kernel[0]: jnl: unknown-dev: journal replay done. Aug 18 11:36:19 localhost kernel[0]: Kernel is LP64 Aug 18 11:36:19 localhost kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 3 sc_chainmak 0 Aug 18 11:36:19 localhost kernel[0]: 2.864289: ath_get_caps[4013] tx chainmask mismatch actual 1 sc_chainmak 0 Aug 18 11:36:19 localhost kernel[0]: 2.875063: Atheros: mac 128.2 phy 13.0 radio 12.0 Aug 18 11:36:19 localhost kernel[0]: 2.895663: Use hw queue 0 for WME_AC_BE traffic Aug 18 11:36:19 localhost kernel[0]: 2.915843: Use hw queue 1 for WME_AC_BK traffic Aug 18 11:36:19 localhost kernel[0]: 2.935580: Use hw queue 2 for WME_AC_VI traffic Aug 18 11:36:19 localhost kernel[0]: 2.954863: Use hw queue 3 for WME_AC_VO traffic Aug 18 11:36:19 localhost kernel[0]: 2.974034: Use hw queue 8 for CAB traffic Aug 18 11:36:19 localhost kernel[0]: 2.992717: Use hw queue 9 for beacons Aug 18 11:36:19 localhost kernel[0]: 3.010969: wlan_vap_create : enter. devhandle=0x9e462610, opmode=IEEE80211_M_STA, flags=0x1 Aug 18 11:36:19 localhost kernel[0]: 3.032555: wlan_vap_create : exit. devhandle=0x9e462610, opmode=IEEE80211_M_STA, flags=0x1. Aug 18 11:36:19 localhost kernel[0]: 3.054015: start[1012] sc->sc_inuse_cnt is at offset: 203c, sizeof(_sc->sc_ic) is 25e8 Aug 18 11:36:20 localhost kernel[0]: AppleRTL8169Ethernet: Ethernet address 64:31:50:5d:24:36 Aug 18 11:36:20 localhost kernel[0]: AirPort_AtherosNewma40: Ethernet address 00:22:43:8e:44:c7 Aug 18 11:36:20 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification Aug 18 11:36:20 localhost kernel[0]: 13.886166: ATHR: unknown locale: 60 Aug 18 11:36:25 localhost kernel[0]: Previous Shutdown Cause: 0 Aug 18 11:36:25 localhost kernel[0]: Acpi brightness levels:11, lowest brightness:0, highest brightness:100 Aug 18 11:36:25 localhost kernel[0]: PowerManagement is Starting Aug 18 11:36:25 localhost kernel[0]: VoodooPS2SynapticsTouchPad loaded Aug 18 11:36:25 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode Aug 18 11:36:25 localhost kernel[0]: NVDANV50HAL loaded and registered. Aug 18 11:36:25 localhost kernel[0]: DSMOS has arrived Aug 18 11:36:25 localhost kernel[0]: No interval found for . Using 8000000 Aug 18 11:36:26 localhost kernel[0]: VoodooPS2Trackpad: Synaptics TouchPad v6.3 Aug 18 11:36:26 localhost kernel[0]: SuperIODevice: [Warning] found unsupported ship ID=0xffff Link to comment Share on other sites More sharing options...
Peter_sm Posted August 18, 2012 Share Posted August 18, 2012 some more logs, one line is saying this can't find GPIO line, 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] memory mapped successfully 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] identifying the chipset 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] BOOT0 : 0x0a5400a2 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] chipset: GT216 (NVA5) family: NV50 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] crystal freq: 27000KHz 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] trying to shadow bios 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] VBIOS appears to be valid 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] VBIOS successfully read from PRAMIN 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] parsing BIOS 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] VBIOS BIT signature found 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] VBIOS version 70.16.25.01 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] initializing monitoring driver 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] parsing i2c dcb table 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-0-e138-e138-0 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-1-e150-e150-1 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-3-e180-e180-2 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-5-e274-e274-5 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-6-e764-e764-6 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-7-e780-e780-7 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-8-e79c-e79c-8 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-9-e7b8-e7b8-9 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-0-0-0-10 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-1-1-1-11 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-2-2-2-12 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-3-3-3-13 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] probing I2C busses... 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] bus: 1 device: 50 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] bus: 1 device: 4f 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] registering temperature sensors... 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] registering clocks sensors... 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] registering PWM sensors... 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] can't find GPIO line 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] can't get pwm value 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] can't find GPIO line 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] rpm fan sense gpio func not found 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] [Debug] registering voltage sensors... 8/18/12 2:54:58.000 PM kernel: NouveauSensors: [card0] started Link to comment Share on other sites More sharing options...
The Real Deal Posted August 18, 2012 Share Posted August 18, 2012 Hi, rev. downloaded 15 minutes ago : Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] memory mapped successfully Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] identifying the chipset Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] BOOT0 : 0x0c8000a1 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] chipset: GF110 (NVC8) family: NVC0 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] crystal freq: 27000KHz Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] trying to shadow bios Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] VBIOS appears to be valid Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] VBIOS successfully read from PRAMIN Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] parsing BIOS Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] VBIOS BIT signature found Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] VBIOS version 70.10.20.00 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] initializing monitoring driver Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] parsing i2c dcb table Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-0-e138-e138-0 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-1-e150-e150-1 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-3-e180-e180-2 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-5-e274-e274-5 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-6-e764-e764-6 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-7-e780-e780-7 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-8-e79c-e79c-8 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-9-e7b8-e7b8-9 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-0-0-0-10 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-1-1-1-11 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-2-2-2-12 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-3-3-3-13 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] probing I2C busses... Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] bus: 1 device: 4c Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] bus: 1 device: 4a Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] bus: 1 device: 49 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] bus: 1 device: 48 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] bus: 1 device: 46 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] bus: 1 device: 30 Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering temperature sensors... Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering clocks sensors... Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering PWM sensors... Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering voltage sensors... Aug 18 17:15:06 localhost kernel[0]: NouveauSensors: [card0] started Link to comment Share on other sites More sharing options...
kozlek Posted August 18, 2012 Author Share Posted August 18, 2012 I've created "develop" branch which contains latest testing changes. Download from it, not from "master" Link to comment Share on other sites More sharing options...
mitch_de Posted August 18, 2012 Share Posted August 18, 2012 Q: Is that tests with NouveauSensors independend from using VBIOS (Chameleon option + GPU bios file)? Background: For my knowledge, (my experiences with/without VBIOS) i cant see any changes (OpenGL speed, gpu temps) using VBIOS (modded BIOS file) or without VBIOS. Link to comment Share on other sites More sharing options...
Peter_sm Posted August 18, 2012 Share Posted August 18, 2012 Hi Kozlek, Log from "develop"version What I don't see is temperature for my hard drive and no info about fans. Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] memory mapped successfully Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] identifying the chipset Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] BOOT0 : 0x0a5400a2 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] chipset: GT216 (NVA5) family: NV50 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] crystal freq: 27000KHz Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] trying to shadow bios Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] VBIOS appears to be valid Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] VBIOS successfully read from PRAMIN Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] parsing BIOS Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] VBIOS BIT signature found Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] VBIOS version 70.16.25.01 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] initializing monitoring driver Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] parsing i2c dcb table Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-0-e138-e138-0 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-1-e150-e150-1 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-3-e180-e180-2 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-5-e274-e274-5 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-6-e764-e764-6 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-7-e780-e780-7 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-8-e79c-e79c-8 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-9-e7b8-e7b8-9 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-0-0-0-10 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-1-1-1-11 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-2-2-2-12 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-3-3-3-13 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] probing I2C busses... Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] got response on bus:NV_I2C_DEFAULT1 port:0x50 Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] got response on bus:NV_I2C_DEFAULT1 port:0x4f Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering temperature sensors... Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering clocks sensors... Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering PWM sensors... Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] can't find GPIO line Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] can't get pwm value Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] can't find GPIO line Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] rpm fan sense gpio func not found Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] [Debug] registering voltage sensors... Aug 18 20:34:59 localhost kernel[0]: NouveauSensors: [card0] started Link to comment Share on other sites More sharing options...
nekonoko Posted August 18, 2012 Share Posted August 18, 2012 Here's a report (develop branch) from a GTX580: NouveauSensors: [card0] [Debug] memory mapped successfully NouveauSensors: [card0] [Debug] identifying the chipset NouveauSensors: [card0] [Debug] BOOT0 : 0x0c8000a1 NouveauSensors: [card0] chipset: GF110 (NVC8) family: NVC0 NouveauSensors: [card0] [Debug] crystal freq: 27000KHz NouveauSensors: [card0] [Debug] trying to shadow bios NouveauSensors: [card0] [Debug] shadowing bios from PRAMIN NouveauSensors: [card0] [Debug] VBIOS appears to be valid NouveauSensors: [card0] VBIOS successfully read from PRAMIN NouveauSensors: [card0] [Debug] parsing BIOS NouveauSensors: [card0] VBIOS BIT signature found NouveauSensors: [card0] VBIOS version 70.10.17.00 NouveauSensors: [card0] [Debug] initializing monitoring driver NouveauSensors: [card0] [Debug] parsing i2c dcb table NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-0-e138-e138-0 NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-1-e150-e150-1 NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-3-e180-e180-2 NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-5-e274-e274-5 NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-6-e764-e764-6 NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-7-e780-e780-7 NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-8-e79c-e79c-8 NouveauSensors: [card0] [Debug] adding i2c port nouveau-5-9-e7b8-e7b8-9 NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-0-0-0-10 NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-1-1-1-11 NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-2-2-2-12 NouveauSensors: [card0] [Debug] adding i2c port nouveau-6-3-3-3-13 NouveauSensors: [card0] [Debug] probing I2C busses... NouveauSensors: [card0] [Debug] got response on bus:NV_I2C_DEFAULT1 port:0x4a NouveauSensors: [card0] [Debug] got response on bus:NV_I2C_DEFAULT1 port:0x49 NouveauSensors: [card0] [Debug] got response on bus:NV_I2C_DEFAULT1 port:0x48 NouveauSensors: [card0] [Debug] got response on bus:NV_I2C_DEFAULT1 port:0x46 NouveauSensors: [card0] [Debug] got response on bus:NV_I2C_DEFAULT1 port:0xc NouveauSensors: [card0] [Debug] registering temperature sensors... NouveauSensors: [card0] [Debug] registering clocks sensors... NouveauSensors: [card0] [Debug] registering PWM sensors... NouveauSensors: [card0] [Debug] registering voltage sensors... NouveauSensors: [card0] started Link to comment Share on other sites More sharing options...
Recommended Posts