HFW Posted February 6, 2012 Share Posted February 6, 2012 Yup, seems to work (mostly) http://dl.dropbox.co...%2019.52.38.png Not too bothered about voltages myself though, it was fan speeds/temps I was interested in. Thanks. Edit: And multiplier now shows up in HWMonitor for me: http://dl.dropbox.co...%2019.57.31.png Doesn't seem to change though. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 6, 2012 Share Posted February 6, 2012 Feb 6 21:53:38 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:53:45: --- last message repeated 15 times --- Feb 6 21:53:45 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x24D400001900 Feb 6 21:53:45: --- last message repeated 3 times --- Feb 6 21:53:45 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:53:47: --- last message repeated 3 times --- Feb 6 21:53:47 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x24D400001900 Feb 6 21:53:47: --- last message repeated 3 times --- Feb 6 21:53:47 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:54:17: --- last message repeated 35 times --- Feb 6 21:54:30 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:54:35: --- last message repeated 23 times --- Feb 6 21:54:35 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x24D400001900 Feb 6 21:54:35: --- last message repeated 3 times --- Feb 6 21:54:35 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 and here result !! Link to comment Share on other sites More sharing options...
kozlek Posted February 6, 2012 Author Share Posted February 6, 2012 Try latest IntelThermal from github (from nuvoton fix rev.), should show correct multipliers Link to comment Share on other sites More sharing options...
HFW Posted February 6, 2012 Share Posted February 6, 2012 That's the one I'm using. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 6, 2012 Share Posted February 6, 2012 Try latest IntelThermal from github (from nuvoton fix rev.), should show correct multipliers ok Untitled.tiff only change between 18 or 23 only some times 14 appear i think that the msrdumper is the correct but sensor read this incorrect as the multiplier used is 8 but it is readed as 18 !! Link to comment Share on other sites More sharing options...
THe KiNG Posted February 7, 2012 Share Posted February 7, 2012 Feb 6 21:53:38 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:53:45: --- last message repeated 15 times --- Feb 6 21:53:45 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x24D400001900 Feb 6 21:53:45: --- last message repeated 3 times --- Feb 6 21:53:45 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:53:47: --- last message repeated 3 times --- Feb 6 21:53:47 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x24D400001900 Feb 6 21:53:47: --- last message repeated 3 times --- Feb 6 21:53:47 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:54:17: --- last message repeated 35 times --- Feb 6 21:54:30 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 Feb 6 21:54:35: --- last message repeated 23 times --- Feb 6 21:54:35 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x24D400001900 Feb 6 21:54:35: --- last message repeated 3 times --- Feb 6 21:54:35 The-Kings-MacBook-Pro kernel[0]: IntelThermal: MSR_IA32_PERF_STATUS 0x25CA00001B00 and here result !! O_O Didn't know I have a clone! Link to comment Share on other sites More sharing options...
Slice Posted February 7, 2012 Share Posted February 7, 2012 Hi, slice! Yes, but only on GitHub. it has cool mac app... I don't want to get back to SVN. I reformat partition when I had secret code to access GIT. Will try register again. This plugin is totally made by slice, I really don't know how to fix it. If you mean PC8739x then it is wrong plugin and will not work for anybody except me because it is using some OEM hack. It will be better for me as well as for other Dell laptops users to create new plugin using SMI access. The method is known but I have no time and wishes to do this. O_O Didn't know I have a clone! Link to comment Share on other sites More sharing options...
Logicpro9_user Posted February 7, 2012 Share Posted February 7, 2012 This don't work with the Badaxe 2 mobo, the CPU is fine and graphics card but no fans. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 7, 2012 Share Posted February 7, 2012 O_O Didn't know I have a clone! LOL i use user name as $The-King$ If you mean PC8739x then it is wrong plugin and will not work for anybody except me because it is using some OEM hack. It will be better for me as well as for other Dell laptops users to create new plugin using SMI access. The method is known but I have no time and wishes to do this. hope any one do it Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 7, 2012 Share Posted February 7, 2012 latest one on github show no multiplier 0.0 Link to comment Share on other sites More sharing options...
mitch_de Posted February 8, 2012 Share Posted February 8, 2012 I only want to remember to check real stepping after using new fakesmc + intelthermal by msrdumper. For me it was not only an cosmetic problem - showing an fixed 10* multiplier , it was real fixed multiplier problem. Stepping stopped working. For me, IntelThermal shows fixed multiplier 10* and that was real - no stepping shown also in msr dumper. Went back to older fakesmc + InteCPUMonitor = stepping works again with same OSX and same dsdt. Dont know if maybe bit newer builds or other C2D cpus like mine (E7400) dont have that effect but i would cross check stepping with msrdumper. my first thinking: could it be that IntelThermal MSR reads can block the native AppleIntelCPU.kext in changing the MSR stepping tasks by timing problems / interrupt problems in the msr read code (maybe depends on CPU type also if problem happens) ? Link to comment Share on other sites More sharing options...
dgsga Posted February 8, 2012 Share Posted February 8, 2012 Feedback for moz: Nuvoton plugin works great for fans and temps on Maximus IV Gene-Z mobo but all voltages show as zero?? A good start, though Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 8, 2012 Share Posted February 8, 2012 latest one is fixed between 23 27 !! not correct Link to comment Share on other sites More sharing options...
kozlek Posted February 8, 2012 Author Share Posted February 8, 2012 Sorry, I have no SandyBridge system, can't debug and test it. I'll try to find some documentation or open source projects. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 8, 2012 Share Posted February 8, 2012 Sorry, I have no SandyBridge system, can't debug and test it. I'll try to find some documentation or open source projects. thanks very much mozodojo for your work i can give you continuous feedback if you want http://www.insanelymac.com/forum/index.php?showtopic=258612 Link to comment Share on other sites More sharing options...
THe KiNG Posted February 9, 2012 Share Posted February 9, 2012 Sorry, I have no SandyBridge system, can't debug and test it. I'll try to find some documentation or open source projects. I can try to help but on me it fail to compile both xcode 3.x or 4.x. What's the trick? Link to comment Share on other sites More sharing options...
kozlek Posted February 9, 2012 Author Share Posted February 9, 2012 I can try to help but on me it fail to compile both xcode 3.x or 4.x. What's the trick? Mac OS X Lion 10.7.3, XCode 4.2.1, LLVM GCC 4.2 - nothing special? Link to comment Share on other sites More sharing options...
THe KiNG Posted February 9, 2012 Share Posted February 9, 2012 Mac OS X Lion 10.7.3, XCode 4.2.1, LLVM GCC 4.2 - nothing special? My mistake, didn't know I can only work on kexts, usually I remove the content of the build/binary folder... Link to comment Share on other sites More sharing options...
kozlek Posted February 10, 2012 Author Share Posted February 10, 2012 I only want to remember to check real stepping after using new fakesmc + intelthermal by msrdumper. For me it was not only an cosmetic problem - showing an fixed 10* multiplier , it was real fixed multiplier problem. Stepping stopped working. For me, IntelThermal shows fixed multiplier 10* and that was real - no stepping shown also in msr dumper. Went back to older fakesmc + InteCPUMonitor = stepping works again with same OSX and same dsdt. Dont know if maybe bit newer builds or other C2D cpus like mine (E7400) dont have that effect but i would cross check stepping with msrdumper. my first thinking: could it be that IntelThermal MSR reads can block the native AppleIntelCPU.kext in changing the MSR stepping tasks by timing problems / interrupt problems in the msr read code (maybe depends on CPU type also if problem happens) ? SpeedStep working for me If I use stepper data from macbookpro (SP11) in CustomProfile.kext when multiplier comes down to 11 on idle and comes up to 15-18-22 on CPU load. If I use stepper data from iMac (SP10) when multiplier always stays on maximum 22. Link to comment Share on other sites More sharing options...
mitch_de Posted February 10, 2012 Share Posted February 10, 2012 "If I use stepper data from macbookpro (SP11) in CustomProfile.kext when multiplier comes down to 11 on idle and comes up to 15-18-22 on CPU load. If I use stepper data from iMac (SP10) when multiplier always stays on maximum 22. " Yep, but how can it be in may case, that without changing anything the usage of IntelThermal blocks stepping (fxed max multi on C2D, in the past, i dont reused an newer version). Link to comment Share on other sites More sharing options...
kozlek Posted February 10, 2012 Author Share Posted February 10, 2012 "If I use stepper data from macbookpro (SP11) in CustomProfile.kext when multiplier comes down to 11 on idle and comes up to 15-18-22 on CPU load. If I use stepper data from iMac (SP10) when multiplier always stays on maximum 22. " Yep, but how can it be in may case, that without changing anything the usage of IntelThermal blocks stepping (fxed max multi on C2D, in the past, i dont reused an newer version). I don't know, need more investigation Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 10, 2012 Share Posted February 10, 2012 latest one here is the result the same Link to comment Share on other sites More sharing options...
ham4ever Posted February 10, 2012 Share Posted February 10, 2012 i can use it in Amd Athlon II x3 453 and Ati hd4850 ?? thanks Link to comment Share on other sites More sharing options...
mm67 Posted February 10, 2012 Share Posted February 10, 2012 Looking pretty good with the latest version, only thing not working is that multiplier reading is stuck. MSRDumper and power meter show that speedstepping is working and multiplier is dropping to 16x when idling. Link to comment Share on other sites More sharing options...
Goron Posted February 10, 2012 Share Posted February 10, 2012 New Nuvoton doesn´t seem to work on Sabertooth P67: Link to comment Share on other sites More sharing options...
Recommended Posts