themusicalduck Posted September 18, 2012 Share Posted September 18, 2012 It's probably because you are using the Intel graphics which aren't supported as well under OSX. You could try using this http://www.osx86.net...ics_latest.html or http://www.osx86.net/downloads.php?do=file&id=2516 - although I don't think it supports QE/CI, but it might at least allow you to boot. Link to comment Share on other sites More sharing options...
Fouer Posted September 18, 2012 Share Posted September 18, 2012 It's probably because you are using the Intel graphics which aren't supported as well under OSX. You could try using this http://www.osx86.net...ics_latest.html or http://www.osx86.net...do=file&id=2516 - although I don't think it supports QE/CI, but it might at least allow you to boot. Thanks for reply, but didnt help Still stuck. Link to comment Share on other sites More sharing options...
joshhh Posted September 18, 2012 Author Share Posted September 18, 2012 very strange, even intel hd graphics or any other unsupported graphics cards should allow to boot in vesa mode, but logs didn't show me anything, no errors, no messages last option is boot with flags -v -f -x npci=0x2000 this is safe graphics mode, a year ago it helped me to boot with unsupported version of geforce gts 450 Link to comment Share on other sites More sharing options...
wyxz2008 Posted September 19, 2012 Share Posted September 19, 2012 Universal patcher for system kexts Set boot screen brightness... interesting. Could you upload this patcher? Link to comment Share on other sites More sharing options...
Fouer Posted September 19, 2012 Share Posted September 19, 2012 very strange, even intel hd graphics or any other unsupported graphics cards should allow to boot in vesa mode, but logs didn't show me anything, no errors, no messages last option is boot with flags -v -f -x npci=0x2000 this is safe graphics mode, a year ago it helped me to boot with unsupported version of geforce gts 450 Thanks, it helped. Now I can boot but cant change my screen resolution. I guess it is because it's a safe mod. Anyways, thanks, hope I'll manage to find a solution to make it work properly Link to comment Share on other sites More sharing options...
joshhh Posted September 19, 2012 Author Share Posted September 19, 2012 I'll upload it in friday maybe with OSX simple installation guide and some other stuff Since Lenovo has a buggy ACPI screen brightness use third party tool to setup it on OS boot Set boot screen brightness... interesting. Could you upload this patcher? Resolution change is possible with Switchresx tool or with some frame buffer patches/replacements that can setup few modes. Don't know much about this and Intel HD Graphics but it worked on GMA950 on my old Acer Travelmate 2480 on 10.5.8 Thanks, it helped. Now I can boot but cant change my screen resolution. I guess it is because it's a safe mod. Anyways, thanks, hope I'll manage to find a solution to make it work properly Link to comment Share on other sites More sharing options...
sledgehammer89 Posted September 26, 2012 Share Posted September 26, 2012 Can I upgrade to 10.8.2 and copy-over your Kext? Or any other thing which I need to do? Thank you! Edit: even if I don't have a backup harddrive, I just installed 10.8.2 as described above: install 10.8.2 combo update, don't reboot when it say to reboot, copied over Joshhh Kext, set chmod root:wheel to this Kext, deleted /L/C and /S/L/C, then reboot Every that worked with 10.8.0 work with 10.8.2 Link to comment Share on other sites More sharing options...
xxxhonyy Posted September 27, 2012 Share Posted September 27, 2012 Hi Joss, When I replace device (HDEF) layout on my W520 "dsdt.aml" as you adviced I will get an error - would you please have a look at the screenshot enclosed? I might be doing something wrong, excuse me please.. I'm very new to OSx86. I've tried to place my patched dsdt.aml file to /Extra/ but OS does not pick it up (when I reboot and extract DSDT again, the content is original). After I install AppleHDA (using kext wizard), my OS failes to start, I needs to restore to get back. Any idea? This is original content... Device (HDEF) { Name (_ADR, 0x001B0000) Name (_S3D, 0x03) Name (RID, 0x00) Name (_PRW, Package (0x02) { 0x0D, 0x04 }) Method (_PSW, 1, NotSerialized) { Noop } } Link to comment Share on other sites More sharing options...
joshhh Posted September 30, 2012 Author Share Posted September 30, 2012 Simple 10.7-10.8 installation guide video http://youtu.be/6IwgNrVbx9w 2 Link to comment Share on other sites More sharing options...
joshhh Posted October 2, 2012 Author Share Posted October 2, 2012 Small preparations for large update again. I've patched DSDTs for nvidia capable Lenovo Thinkpads T and W series T510 step by step patches https://www.dropbox....tep-by-step.zip DSDTs for other related Thinkpads Models affected: T410 with NVS3100 256/512mb W510 with Quadro 880M W520 with Quadro 1000M and 2000M T420 and T520 and possible 430/530 lineup will be added later https://www.dropbox....r-Thinkpads.zip PS. Universal patcher is almost done with little bit more functions. Release it tomorrow possible depending on job load 3 Link to comment Share on other sites More sharing options...
javiercordero20 Posted October 3, 2012 Share Posted October 3, 2012 Hello Everyone, I've installed the files and DSDT for my T410 and everything works (except VoodooHDA) for some reason without any errors. I've tried the AppleHDA for 10.7 and 10.8 with no errors what so ever and no sound. Anyone have any clues what it could be? At least everything else works fine and speedy on my SSD Appreciate all the help and good work dude! Link to comment Share on other sites More sharing options...
BuckSS Posted October 3, 2012 Share Posted October 3, 2012 Hi All! Updated to 10.8.2 almost without a problems, but have an issue: when i plug an USB flash drive or USB HDD, after a couple of minutes my T510 freezes. Can't find an error in logs, but i'll try. What can be a problem? Link to comment Share on other sites More sharing options...
javiercordero20 Posted October 3, 2012 Share Posted October 3, 2012 Hi All! Updated to 10.8.2 almost without a problems, but have an issue: when i plug an USB flash drive or USB HDD, after a couple of minutes my T510 freezes. Can't find an error in logs, but i'll try. What can be a problem? Have you used the files he posted previously? Does it lockup or does it panic and can you show a screenshot if it does? Link to comment Share on other sites More sharing options...
BuckSS Posted October 3, 2012 Share Posted October 3, 2012 Have you used the files he posted previously? Does it lockup or does it panic and can you show a screenshot if it does? As i said, it freezes, so i can't take a screenshot. No panic, just lockup I have used last DSDT, but didn't tried last .dsl, DSDT Editor provides errors when compiling it and can't fix them. 4641 Warning ResourceTag smaller than Field (Tag: 8 bits, Field: 16 bits) 5258 Error _HID suffix must be all hex digits (ITOR) (i think it don't know "MONITOR") 5891 Warning Reserved method should not return a value (_Q16) 10263 Warning Reserved method should not return a value (_Q15) hm, tried now to plug and work with USB flash drives and HDD, no freezes at all... I think it freezes when IT want to, at important and busy moments, as usual =) Link to comment Share on other sites More sharing options...
Jappiman Posted October 5, 2012 Share Posted October 5, 2012 Hello! First of all, I'd like to thank Joshhh, for providing us with such an easy and straightforward way to have Mountain Lion installed in our Thinkpads (I have a t410 with 256mb nVidia graphics). I am having some troubles, though. I'm getting some ramdom crashes in my system, for no apparent reason. Recently I've nailed it down to file operations, specially with large transfers with a lot of files, as the User's Library directory. First I noticed while copying it with Finder.app, as the system would crash, without leaving a hint in the log files. Next I tried doing it in single user mode (booting with the -s flag), getting a kernel panic, screengrabs of which I attach in this message. I have a OCZ Vertex 4 SSD Drive(latest firmware installed), I tried both with Trim Enabler and without. I also checked the drive with Lenovo's bios' utility. Is anyone having similar troubles? Does anyone know how to fix this? UPDATE: I just got some more messages in my last crash. the messages I get are: SerialATAPI device reconfiguration did not complete successfully (failedCommandInfo = 0x1) (repeated 6 times) SerialATAPI Terminating due to unrecoverable Reset error - drive has stopped responding. (resetType = 0x0, newPowerState = 0x01, failedCommandInfo = 0x01) I'm not sure if they are related to the crash, but they might add some information... UPDATE (again): I avoided the crashes by removing the DVD Drive, it's not an elegant solution, but I already ordered an Optical Bay hard disk caddy :-) 1 Link to comment Share on other sites More sharing options...
wyxz2008 Posted October 5, 2012 Share Posted October 5, 2012 My t510 often crashed. It turned out it was the memory. Memtest reported errors. I replaced the bad memory, and since then my t510 has been working fine. 1 Link to comment Share on other sites More sharing options...
joshhh Posted October 5, 2012 Author Share Posted October 5, 2012 Try this System Preferences - Energy Saver, uncheck "put discs to sleep when possible" Hello! First of all, I'd like to thank Joshhh, for providing us with such an easy and straightforward way to have Mountain Lion installed in our Thinkpads (I have a t410 with 256mb nVidia graphics). I am having some troubles, though. I'm getting some ramdom crashes in my system, for no apparent reason. Recently I've nailed it down to file operations, specially with large transfers with a lot of files, as the User's Library directory. First I noticed while copying it with Finder.app, as the system would crash, without leaving a hint in the log files. Next I tried doing it in single user mode (booting with the -s flag), getting a kernel panic, screengrabs of which I attach in this message. I have a OCZ Vertex 4 SSD Drive(latest firmware installed), I tried both with Trim Enabler and without. I also checked the drive with Lenovo's bios' utility. Is anyone having similar troubles? Does anyone know how to fix this? UPDATE: I just got some more messages in my last crash. the messages I get are: SerialATAPI device reconfiguration did not complete successfully (failedCommandInfo = 0x1) (repeated 6 times) SerialATAPI Terminating due to unrecoverable Reset error - drive has stopped responding. (resetType = 0x0, newPowerState = 0x01, failedCommandInfo = 0x01) I'm not sure if they are related to the crash, but they might add some information... Link to comment Share on other sites More sharing options...
xxxhonyy Posted October 5, 2012 Share Posted October 5, 2012 thank you for great guide Josh! your video shows completely different approach agains what I've always been doing with Uni****t ... the system's running faster, no crashes so far... but my sound, usb3, sleep mode & SD card reader does not work. Is it the way it's supposed to be or I'm missing something on my W520? I used the kext you listed here earlier (ML10.8) and placed DSDT.aml for W520 in Extra. Tom Link to comment Share on other sites More sharing options...
joshhh Posted October 5, 2012 Author Share Posted October 5, 2012 DSDT pack for Thinkpads updated to match memory allocation regions https://www.dropbox.com/s/rd1mninhu0jyqfk/DSDT-for-Thinkpads.zip 4 Link to comment Share on other sites More sharing options...
xxxhonyy Posted October 5, 2012 Share Posted October 5, 2012 I've tried your latest W520-DSDT-2-Quadro-1000m.aml (renamed to dsdt.aml an placed in Extra) but it's still the same. Link to comment Share on other sites More sharing options...
Jappiman Posted October 5, 2012 Share Posted October 5, 2012 Avoiding to turn off the hard drive won't fix the issue :-( It seems I have serious problems with my drive... I'm going to try removing the DVD drive. UPDATE: I was able to copy the files without any crashes, by removing the DVD drive. Hopefully I have an USB Bluray reader :-) Link to comment Share on other sites More sharing options...
joshhh Posted October 6, 2012 Author Share Posted October 6, 2012 For sound on W520 you need patched AppleHDA posted two pages before in this topic usb3 should work with xhci.kext should be found on this forum too sleep, don't know what is problem with it, need to compare dsdt with one from w520 topic sd card reader on t510 model is not usb, so it won't work if w520 also have similar one sound, usb3, sleep mode & SD card reader thank you for great guide Josh! your video shows completely different approach agains what I've always been doing with Uni****t ... the system's running faster, no crashes so far... but my sound, usb3, sleep mode & SD card reader does not work. Is it the way it's supposed to be or I'm missing something on my W520? I used the kext you listed here earlier (ML10.8) and placed DSDT.aml for W520 in Extra. Tom 1 Link to comment Share on other sites More sharing options...
joshhh Posted October 6, 2012 Author Share Posted October 6, 2012 Look at AHCIStorage kexts in this topic http://www.insanelymac.com/forum/topic/280062-waiting-for-root-device-when-kernel-cache-used-only-with-some-disks-fix/page__st__60 possible replacing it to patched ones should help Avoiding to turn off the hard drive won't fix the issue :-( It seems I have serious problems with my drive... I'm going to try removing the DVD drive. UPDATE: I was able to copy the files without any crashes, by removing the DVD drive. Hopefully I have an USB Bluray reader :-) Link to comment Share on other sites More sharing options...
Tetonne Posted October 6, 2012 Share Posted October 6, 2012 DSDT pack for Thinkpads updated to match memory allocation regions https://www.dropbox....r-Thinkpads.zip Thnaks for this can't find my T420 is it possible to add it Link to comment Share on other sites More sharing options...
Internal_error Posted October 7, 2012 Share Posted October 7, 2012 Dear all, I've a Lenovo T510 4349-AF5 but even following your guide I were not able to make all working on it. Here there are some details: 1) I installed successfully Mountain Lion 10.8. 2) I installed the required kext as from the file "Lenovo-T510-dsdt-kexts.zip" through the Kext Utility: the audio works fine but I'm not able to make my Wireless network or even the Ethernet Card working. The wireless card is an "Intel Centrino Advanced-N 6200 AGN" and the "Ethernet card is an Intel 82577 LM Gigabit": none of these are working. 3) I installed the DSDT 4) I installed the Chimera boot loader 5) I didn't patch the firmware, because I cannot do it (notebook is not mine!): I hope the DSDT file works even without the patch. 6) I need just the network working: that's all! I also followed exactly the procedure in the video in this post but the network is not working. Another problem is that after the boot, it takes a long time for the laptop to be ready to receive input from the keyboard and from the mouse: more than 3 minutes! Is there anyone that as my same model and can help me with it? Thanks and regards, Internal_error Link to comment Share on other sites More sharing options...
Recommended Posts