Erdbeeere Posted February 8, 2012 Share Posted February 8, 2012 God damn it, the 1080p panel is realy awesome! What panel and what FRU is this display? I hope i receive one wlan card this week, i've ordered two different models. (A Dell DW1510 and one Atheros Card) http://tonymacx86.bl...-11-update.html Tony has fixed the USB, maybe he fixed the bug that you have? I'm still on 10.7.2, i'm waiting for a better USB support. Link to comment Share on other sites More sharing options...
joshhh Posted February 9, 2012 Author Share Posted February 9, 2012 I've bought AUO B156HW01 V.4 matte screen, perfect colors and perfect resolution AUO has also B156HW01 V.7 of this display but it's glossy I fixed my problem with AppleACPI 1.4 by rolling back to 1.3.5 But when I deal with DSDT fix for usb one time I get usb working for a 5-10 seconds after sleep and after it lost again Doesn't really know what did they changed [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to get usb fix, possible some binary patch God damn it, the 1080p panel is realy awesome! What panel and what FRU is this display? I hope i receive one wlan card this week, i've ordered two different models. (A Dell DW1510 and one Atheros Card) http://tonymacx86.bl...-11-update.html Tony has fixed the USB, maybe he fixed the bug that you have? I'm still on 10.7.2, i'm waiting for a better USB support. Link to comment Share on other sites More sharing options...
wyxz2008 Posted February 11, 2012 Share Posted February 11, 2012 Thanks a lot. I use your DSDT.aml and kexts and my T510 almost works perfectly with Lion 10.7.3, except: 1. My keyboard and mouse will not work (usb mouse and t510's trackpad can move, but can not be clicked) in the first few minutes after the system is booted. 2. I see lots of error log like this: Sound assertion "kTypePinComplex != fType" failed in AppleHDAWidget at line 2043 goto Exit (I googled about it, and found some one replaced error msg in the AppleHDA file with 000000…00000s to bypass the problem, but I did not try it becasue I didn't have a hex editor.) 3. My t510 has an i5 540m CPU, I don't know how to check whether Speedstep and turboboost work or not. 4. As you said, after wake up from sleep, usb doesn't work. BTW: Because my note book sometimes would not boot up, I have removed the following string from my org.chameleon.Boot.plist. <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>Kernel Flags</key> <string>-force64 -allowAppleCPUPM</string> And I had to add <key>Kernel Flags</key> <string>npci=0x2000</string> to org.chameleon.Boot.plist, or it could not start up too. Thank you again for your guide. Link to comment Share on other sites More sharing options...
Erdbeeere Posted February 11, 2012 Share Posted February 11, 2012 If anyone needs a working WIFI Card for Windows 7 (works also with Access Connections!) and Lion, here is a working Card: http://www.ebay.com/itm/250865656691?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 Please note that you have to flash a modified BIOS with whitelist and that you can't use full-size WIFI cards in the WWAN Slot. The WWAN Slot is a mini PCI Express Slot, but only with USB contacts. (All WWAN Cards are USB Cards) Link to comment Share on other sites More sharing options...
joshhh Posted February 17, 2012 Author Share Posted February 17, 2012 Ok guys, I've just installed 10.8 Mountain Lion DP1 on Lenovo T510 Install process was pretty simple: Everything works fine but I have some random freezes. - Atheros WLAN card doesn't work - Sleep not working with my latest dsdt edits - Cmos reset after sleep even with patched AppleRTC - Still have USB lost after sleep Good news - have noise reduction checkbox in sound preferences mic section 1 Link to comment Share on other sites More sharing options...
joshhh Posted February 18, 2012 Author Share Posted February 18, 2012 Good news About 10.8 installation - Sleep now working - No more cmos reset after sleep Problems on both Lion/ML with native AppleACPIPlatform is - External USB lost after sleep (bluetooth, camera, finger sensor is online after sleep) - Display doesn't turn on until you press any button on top case after sleep So lets try to figure out about usb lost on T/W series: 1) I extracted few dsdt's from latest MacBooks - unibody pro 5.1 and 6.1(here is T510/W510 hardware) also Air 2011 In all dsdt/ssdt UHC1/2 sections is different from ours in structure of device names inside 2) There is a thread about usb lost on tonymac and fix for some Gigabyte boards http://www.tonymacx8...php?f=3&t=50063 I compared two dsdt from two different Gig boards and it's only few small changes between of them. And what is most interesting - EHC sections looks almost like form MacBooks People say that with that fixes usb works after sleep 3) There is Lenovo G and Z series laptops 460/560(arrandale) and 470/570(sandy) that has no usb lost issue at all with any AppleACPIplatform from snow 1.3.5 to native Lion 1.4 and as people said ML 1.5 And G/Z series have EHC sections structure almost like MacBooks So there is way I see is to combine give boards dsdt EHC sections with ours dsdt or try to deal with G and Z series dsdts So there is a files: 1) MacBooks dsdts macbook-pro-5.1-EHC.aml.zip macbook-pro-6.1-EHC.aml.zip macbook-air-4.1-EHC.aml.zip 2) gigabyte boards dsdts gige-boards-compare.zip 3) lenovo Z560 fixed dsdt z560-dsdt.aml.zip I need help to deal with this Link to comment Share on other sites More sharing options...
schustah Posted March 3, 2012 Share Posted March 3, 2012 really good work Mate ! working great..sleep with Lid shut etc...but after install kext and dsdt.aml I've loose Bluetooth Funktion,thats the only thing. Link to comment Share on other sites More sharing options...
themusicalduck Posted March 5, 2012 Share Posted March 5, 2012 Thanks for this. I installed all the kext files onto an Iatkos L2 install and things are working well. I only have one problem. Once I boot up from Chameleon, I cannot enter any keystrokes or click anything, until I have plugged a keyboard in and unplugged it again. It comes up with the "Keyboard not found" dialog and won't accept anything. Once I plug the keyboard in, all the keystrokes I pressed on the laptop keyboard before suddenly flood through. The thing is, I know it is possible for this to work, because I had a previous install (that got all messed up, then I found this guide and decided to start again) in which this problem did not happen. The keyboard not found dialog still appeared, but the keyboard would work anyway once I clicked in the password box. Any thoughts on how to fix it? It's not such a big problem until I need to take the laptop out somewhere and won't have a keyboard on hand to plug in. EDIT: After another reboot, I'm not sure if that is the problem. I booted with the keyboard plugged in and it still wouldn't accept keystrokes. After unplugging it and plugging it in a few times, it suddenly started working. So it's possible there is just a huge time delay after the login screen appears when things start to work. EDIT2: Ok, I think the problem is to do with newer versions of Chameleon. On my old install I replaced Chameleon with Chimera and had the same problem. With an older version of Chameleon the keyboard worked (but that's probably why there were so many other problems with it, using an older version). So I have Chameleon 2.0 RC5 at the moment. If I wait for a couple of minutes it seems like the keyboard/mouse start to work, so I can live with it. Link to comment Share on other sites More sharing options...
creed205 Posted March 15, 2012 Share Posted March 15, 2012 So I have Chameleon 2.0 RC5 at the moment. If I wait for a couple of minutes it seems like the keyboard/mouse start to work, so I can live with it. I have this problem on my machine - a desktop - completely different hardware but for me it's becomming anoying. Have you found a fix for this yet? Seems to me like it's either Chameleon related like you or perhaps kext related. 1 Link to comment Share on other sites More sharing options...
themusicalduck Posted March 18, 2012 Share Posted March 18, 2012 I have this problem on my machine - a desktop - completely different hardware but for me it's becomming anoying. Have you found a fix for this yet? Seems to me like it's either Chameleon related like you or perhaps kext related. EDIT: Seems like I've found the real problem. It was being caused by AppleHDA.kext. I'll probably switch back to VoodooHDA instead. No luck so far. I did a bit more searching. Someone suggested it was caused by VoodooPS2. I removed the kext and rebooted (reloading the kext cache), but it didn't help. I was going to suggest looking at http://www.insanelym...howtopic=261581 but then I noticed you have posted on it anyway. Disabling USB Bios support didn't solve it for me. A lot of the posts I've read suggest that it takes around 10 minutes before things start working, is that the case with you? Mine takes around 3-4 minutes, so it may be a different problem. Either way, almost all the posts I've seen seem to suggest it's a problem with 10.7.2. Other posts suggest it's something to do with IOKit timing out, although I don't see any message about it on verbose boot. Link to comment Share on other sites More sharing options...
joshhh Posted May 23, 2012 Author Share Posted May 23, 2012 Shalom folks! I'v got completely working solution for sound at T510/T410 + T520/W520(with different bin patch) What we got -sound autodetection speakers-headphones -internal mic -external mic with combo port as line in to use headphones+external mic you need to use headset like iPhone use or any other phone with 4 pin TRRS mini-jack connector also to get it working you should use some patch for HDEF dsdt section Method (_DSM, 4, NotSerialized) { Store (Package (0x0E) { "AAPL,slot-name", Buffer (0x09) { "Built in" }, "device-id", Buffer (0x04) { 0x69, 0x50, 0xF1, 0x14 }, "layout-id", Buffer (0x04) { 0x6E, 0x50, 0x00, 0x00 }, "model", Buffer (0x1A) { "HD Audio Conexant Cx20585" }, "name", Buffer (0x11) { "Conexant Cx20585" }, "device_type", Buffer (0x11) { "Audio Controller" }, // "hda-gfx", // Buffer (0x0A) // { // "onboard-1" // }, "PinConfigurations", Buffer (One) { 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Then install next with updated dsdt and reboot T520/420/W520 machines should patch my next with your codec IDs sudo perl -pi -e 's|\x69\x50\xf1\x14|\x6e\x50\xf1\x14|g' AppleHDA.kext/Contents/MacOS/AppleHDA Good luck Conexant Cx20585-AppleHDA.kext-new-work-latest-2012.03.30.zip 3 Link to comment Share on other sites More sharing options...
Erdbeeere Posted May 25, 2012 Share Posted May 25, 2012 Oh Joshhh, it's so awesome that you are still working on this! Maybe if you have enough time, can you spend some time to do a tuturial (for beginners) with files and a installer? Like this: http://www.tonymacx86.com/viewtopic.php?f=259&t=41546 But anyway, your work was a hugh step torwards a perfectly working ThinkBook! If you want you can create a Paypal Donate Account. If you need some help or logs from different ThinkPads, i will be trying to help you as good as I can. Link to comment Share on other sites More sharing options...
rajesheber Posted June 7, 2012 Share Posted June 7, 2012 Josh, could you tell us how u enabled bluetooth after wake from sleep since in my current DSDT bluetooth is disable after wake from sleep. Link to comment Share on other sites More sharing options...
joshhh Posted June 7, 2012 Author Share Posted June 7, 2012 Try to test my dsdt with bluetooth, I didn't have BT lost about few month since I've added some fixes Josh, could you tell us how u enabled bluetooth after wake from sleep since in my current DSDT bluetooth is disable after wake from sleep. OK, I'll check what I can do Oh Joshhh, it's so awesome that you are still working on this! Maybe if you have enough time, can you spend some time to do a tuturial (for beginners) with files and a installer? Like this: http://www.tonymacx8...p?f=259&t=41546 But anyway, your work was a hugh step torwards a perfectly working ThinkBook! If you want you can create a Paypal Donate Account. If you need some help or logs from different ThinkPads, i will be trying to help you as good as I can. Link to comment Share on other sites More sharing options...
rajesheber Posted June 8, 2012 Share Posted June 8, 2012 I tried using your DSDT but KP. Mine is a t420 - 4180 with HD3000 and Nvidia 4200M. I am attaching my DSDT could you please help with Bluetooth Wake up issue . I have changed the file to .txt since it dint allow mw to upload .aml file ext dsdt.txt Link to comment Share on other sites More sharing options...
joshhh Posted June 16, 2012 Author Share Posted June 16, 2012 Ok folks! I've installed 10.8 DP4 on T510 and it works fine except audio (need to fix HDA to new format) 1 Link to comment Share on other sites More sharing options...
BuckSS Posted June 18, 2012 Share Posted June 18, 2012 Shalom folks! I'v got completely working solution for sound at T510/T410 + T520/W520(with different bin patch) What we got -sound autodetection speakers-headphones -internal mic -external mic with combo port as line in to use headphones+external mic you need to use headset like iPhone use or any other phone with 4 pin TRRS mini-jack connector also to get it working you should use some patch for HDEF dsdt section Then install next with updated dsdt and reboot It worked!!! Thank you! Also I have another problem: i cannot wake from hibernation (hibernatemode 1), it just booting as usual OS booting and sometimes KP happens, but cannot force it wake from sleepimage. I tried forcewake and pinted to sleepimage in Boot.plist. It doesn't help. Sleep worked fine (except BT and USB forced disconnecting and connecting again after sleep) Lenovo T510 Bootloader Chimera 1.7.0 Thank you! Link to comment Share on other sites More sharing options...
BuckSS Posted June 20, 2012 Share Posted June 20, 2012 he he, faced one more... problem ) I need to use just external display and turn off internal. Can I do this? maybe edit the DSDT? Link to comment Share on other sites More sharing options...
joshhh Posted June 20, 2012 Author Share Posted June 20, 2012 My future eGPU for T510=) GTX280 1Gb for Adobe Premiere CS5/6 Link to comment Share on other sites More sharing options...
Erdbeeere Posted June 20, 2012 Share Posted June 20, 2012 Ok folks! I've installed 10.8 DP4 on T510 and it works fine except audio (need to fix HDA to new format) Awesome! I hope there will be a easy-install solution (with bootloader, kexts, dsdt and more) at the 10.8 release. It would be great if the dinternal display is non woking while the thinkpad is in the dock and closed. Link to comment Share on other sites More sharing options...
joshhh Posted June 21, 2012 Author Share Posted June 21, 2012 As addition to this AppleHDA http://www.insanelymac.com/forum/index.php?showtopic=274218&view=findpost&p=1822424 here is updated DSDT with correct sound layout dsdt.aml-latest.zip 2 Link to comment Share on other sites More sharing options...
BuckSS Posted June 21, 2012 Share Posted June 21, 2012 As addition to this AppleHDA http://www.insanelym...dpost&p=1822424 here is updated DSDT with correct sound layout dsdt.aml-latest.zip It's for MLion? Link to comment Share on other sites More sharing options...
joshhh Posted June 21, 2012 Author Share Posted June 21, 2012 not yet It's for MLion? Link to comment Share on other sites More sharing options...
Erdbeeere Posted July 4, 2012 Share Posted July 4, 2012 Maybe something of this thead will help you: http://www.insanelymac.com/forum/index.php?showtopic=268280&st=0 Link to comment Share on other sites More sharing options...
joshhh Posted July 6, 2012 Author Share Posted July 6, 2012 I possible find a way to fix native sound on Mountain Lion not just only for DP2. Try to check it this weekend 1 Link to comment Share on other sites More sharing options...
Recommended Posts