joshhh Posted January 4, 2012 Share Posted January 4, 2012 OS X Lion on ThinkPad T510i:ThinkPad T510i 4314-6BG (also works on T410, T410 AMT, T510 and W510) Before asking it thread. Please fill data about your hardware and software. Without it I can't help Custom working WLAN cards in Lenovos There is a list of current half and full size WLAN cards working native in OSX I use Atheros AR5BHB92 (Atheros 9280) in my T510i + modded BIOS without whitelist check And one important remark about full size cards in all lenovo lineup - WWAN slot is only USB or USB+mSATA capable on Lenovos, there is no mini-PCIe lines in WWAN slot - so full size cards won't work at all. Only way to drive it is to make some mini-PCIe cable extender for WLAN slot and place connected to that cable card instead of WWAN. Half size cards Atheros AR5B93 - 802.11 b/g/n - single-band: 2.4GHz only. МасOS up to 150 Mbps, Windows up to 300 Mbps. - PCI-id [168c:002a] - Native in Mac OS X 10.6, 10.7 и 10.8. AirDrop Works. Atheros AR5BHB92 - 802.11 a/b/g/n - dual-band: 2.4GHz + 5GHz. МасOS up to 150 Mbps on 2.4GHz and up to 300 Mbps on 5GHz, Windows up to 300 Mbps on both bands. - PCI-id [168c:002a] - Native in Mac OS X 10.6, 10.7 и 10.8. AirDrop Works. Broadcom BCM94322HM8L - 802.11 a/b/g/n - dual-band: 2.4GHz + 5GHz. МасOS up to 150 Mbps on 2.4GHz and up to 300 Mbps on 5GHz, Windows up to 300 Mbps on both bands. - PCI-id [14e4,432b] - Native in Mac OS X 10.6, 10.7 и 10.8. AirDrop Works. Full list of supported cards is hereRecent changes 2013.11.12 -OS X Mavericks update guide with links 2012.12.02- Calibration profile for 1920x1080 AUO B156HW01 V5 95% Gamut screen dispcalGUI ThinkPad W520 Display 1920 2012-04-30 D6500 2.2 HQ 3xCurve+MTX.icm.zip2012.11.29- Fixed and tested with WWAN card whitelist in Lenovo T510 Bios file (T410 and W510 bioses was patched successfully before)Sierra MC8781 works fine and depends on signal strength works UMPS or HSPA speeds2012.11.14- Starting huge update of files for all T/W*10 Thinkpads lineup- Added file packs for T410/T510/W510 for OSX 10.6/10.7/10.8 installation- Added modified versions of Thinkpad's BIOS with removed whitelist for WLAN and WWAN cards2012.10.02Simple install guide for Lion and Mountain Lionadded T510 step by step patches archiveadded T410/W510/W520 dsdts2012.09.13Kexts + dsdt + info update2012.08.01DSDT + Kexts update2012.07.18LAN kext updated for OSX 10.82012.07.14OSX Mountain Lion easy install guide2012.07.13Files updated for OSX 10.8 GM Installation2012.02.07Latest DSDT with Battery indication fix and fan sensor fix by acediac, works del with Lion AppleACPI 1.4, but for now USB wake after sleep doesn't work well, hope to deal with usb soon2012.02.05 - I updated OSX to 10.7.3 11D50 build, everything works fine except few things, first - AR9285 not working with current dsdt and Atheros40.kext id's patch, need to revert to 10.7.2 version, Intel E1000 Lan didn't work few times after update but now working well second - laptop sometimes freeze after wake from sleep, only full reset helps, possible thats because I've try to add NVS3100 id to AppleGraphicsPowerManagement.kext, removed id now for test- Tested ExpressCard USB 3.0 Nec card, works great, hot plug of this card is not working well, if you add card to working laptop and try to reboot osx you'll get KP on reboot, with cold plug it works perfect, reed-write speed is insane 110/90 mb/sec at seagate go-flex 3.5 hdd- Received and replaced my ugly 1366*768 LCD screen with 95% gamut Full HD 1920*1080, thats awesome!- Tried to replace Core i3 330M CPU with Core i7 720QM but for now without luck, laptop starts with it spins fans for a 5 seconds as 330M do and after that turn it off and nothing happend next. Possible solution is to get W510 bios and place cpu section from itOne interesting thing - At least T510 have one unsoldered mini-PCIe slot, possible two - one right from chipset between touchpad and fingerprint sensor, second under touchpadFirst oneSecond oneI think its possible to get mini-pcie bracket and solder it on board)-AppleHDA with my little changes works now in W520 with CX20590 codec with auto detection and micThat's all for now 2012.01.22HDMI Audio freeze desktop after boot for about few minutesI rollback some changes to dsdt and replaced older AppleHDA with no HDMI patch appliedFiles here http://www.insanelym...dpost&p=17885332012.01.21 1) Graphics CardNative DSDT for graphics card was corrected to proper NVCAP values. There was a problem in detection monitors connected to DisplayPort before. None of connected devices was detected, only internal display and VGA worked.NVCAP was changed to: NEW /* 0000 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, /* 0008 */ 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, /* 0010 */ 0x00, 0x00, 0x00, 0x00 from OLD /* 0000 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, /* 0008 */ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, /* 0010 */ 0x00, 0x00, 0x00, 0x00 So now I'm able to connect my laptop to DVI input on my 24" monitor and also to HDMI devices like TVs.2) Native HDMI/DisplayPort Audio outputa) First of all we need to add hda-gfx and connector-type sections in graphics card properties in DSDT Method (_DSM, 4, NotSerialized) { Store (Package (0x28) { "AAPL,backlight-control", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "@0,backlight-control", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "@0,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@0,device_type", Buffer (0x08) { "display" }, "@0,display_cfg", Buffer (0x08) { 0xFF, 0xFF, 0xFF, 0xFF }, "@0,connector-type", Buffer (0x04) { 0x00, 0x08, 0x00, 0x00 }, "@0,name", Buffer (0x0F) { "NVDA,Display-A" }, "@1,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@1,device_type", Buffer (0x08) { "display" }, "@1,display_cfg", Buffer (0x08) { 0xFF, 0xFF, 0xFF, 0xFF }, "@1,connector-type", Buffer (0x04) { 0x00, 0x08, 0x00, 0x00 }, "@1,name", Buffer (0x0F) { "NVDA,Display-B" }, "@0,built-in", Buffer (One) { 0x01 }, "@0,pwm-info", Buffer (0x14) { /* 0000 */ 0x01, 0x14, 0x00, 0x64, 0xA8, 0x61, 0x00, 0x00, /* 0008 */ 0x08, 0x52, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, /* 0010 */ 0x00, 0x04, 0x00, 0x00 }, "NVCAP", Buffer (0x14) { /* 0000 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, /* 0008 */ 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, /* 0010 */ 0x00, 0x00, 0x00, 0x00 }, "VRAM,totalsize", Buffer (0x04) { 0x00, 0x00, 0x00, 0x20 }, "device_type", Buffer (0x0D) { "NVDA,Parent" }, "hda-gfx", Buffer (0x0A) { "onboard-1" }, "model", Buffer (0x15) { "NVidia GeForce 9400M" }, "rom-revision", Buffer (0x23) { "NVidia GeForce 9400M OpenGL Engine" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Second - add HDAU device to the end of PEG device in DSDT Device (HDAU) { Name (_ADR, One) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "hda-gfx", Buffer (0x0A) { "onboard-1" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } c) Third - make binary patch of AppleHDA.kextIn AppleHDA[nVIDIA HDMI/DP ]Device ID 10DE-000B ->>> 0B 00 DE 10In HEX editor Find 0A 00 DE 10, Replace 4 times with 0B 00 DE 10In AppleHDAController[ nVIDIA GT218 - High Definition Audio Controller ]Device ID 10DE-0BE3 ->>> DE 10 E3 0BIn HEX editor Find DE 10 E2 0B, Replace 4 times with DE 10 E3 0BSave changes and reinstall nextAfter that you'll be able to connect TV and get sound output via HDMI/DisplayPort device3) Bluetooth lost on long time sleep working with workaroundFirst I've changed some sections in UHCI1/UHCI2 devices in DSDTMethod (_DSM ) looks now: Method (_DSM, 4, NotSerialized) { Store (Package (0x0F) { "device-id", Buffer (0x04) { 0xA6, 0x0A, 0x00, 0x00 }, "AAPL,clock-id", Buffer (One) { 0x0A }, "built-in", Buffer (One) { 0x00 }, "device_type", Buffer (0x05) { "EHCI" }, "AAPL,current-available", 0x04B0, "AAPL,current-extra", 0x02BC, "AAPL,current-in-sleep", 0x03E8, Buffer (One) { 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } After that Bluetooth wakes up after workaround:-If computer sleeps short period of time bluetooth may wake with all other devices-If computer sleep a lot, bluetooth wakes after second short sleep. Wake laptop first, than sleep it again, after few second wake it again - bluetooth should wake 2012.01.17 1) AppleHDA for sound - autodetect speakers/headphones working, internal Mic working with boost (still no noise reduction checkbox in system preferences)DSDT HDEF device should be modified to make AppleHDA working, also you should remove VoodooHDA before installing AppleHDA: Device (HDEF) { Name (_ADR, 0x001B0000) Name (_S3D, 0x03) Name (RID, Zero) Name (_PRW, Package (0x02) { 0x0D, 0x04 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x0E) { "AAPL,slot-name", Buffer (0x09) { "Built in" }, "device-id", Buffer (0x04) { 0x69, 0x50, 0xF1, 0x14 }, "layout-id", Buffer (0x04) { 0x0C, 0x00, 0x00, 0x00 }, "model", Buffer (0x1A) { "HD Audio Conexant Cx20585" }, "name", Buffer (0x11) { "Conexant Cx20585" }, "device_type", Buffer (0x11) { "Audio Controller" }, "PinConfigurations", Buffer (One) { 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } 2) Keyboard - now Fn keys working and if I press Power button for a second system shutdown menu now appear3) Sleep - sleep now works perfect!4) Shutdown - works perfect too!5) AC Adapter - worked before, now maybe works without replacing some kexts6) HPET and RTC fixes was changed a little Donations are welcomeLatest DSDT and kexts are included in archive belowLatest DSDT with Battery indication fix and fan sensor fix by acediac, works well with Lion AppleACPI 1.4, but for now USB wake after sleep doesn't work well 9 Link to comment Share on other sites More sharing options...
gothic860 Posted January 11, 2012 Share Posted January 11, 2012 Hey, thanks for Mini-Guide . I tried the AppleHDA.kext but looks like it doesn't work with my W520. Video - screen brightness values was corrected a bit Can you explain how? Did you get the same brightness level after a reboot? Link to comment Share on other sites More sharing options...
joshhh Posted January 18, 2012 Author Share Posted January 18, 2012 For AppleHDA you need to add this code to your dsdt After AppleHDA should work well Screen brightness levels saved after reboot if i change it but scale levels not correct compare to ubuntu On ubuntu I have linear brightness level changing, in osx I've got exponential growth from minimal brightness(screen is off, in ubuntu it's dim a little) to maximum, first 3-5 low levels increase brightness fast to about 70% of maximum, other do it with little steps. If you know how to fix pwm-info section in video card settings in dsdt tell us, I have dump of brightness levels from ubuntu think it may help Device (HDEF) { Name (_ADR, 0x001B0000) Name (_S3D, 0x03) Name (RID, Zero) Name (_PRW, Package (0x02) { 0x0D, 0x04 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x0E) { "AAPL,slot-name", Buffer (0x09) { "Built in" }, "device-id", Buffer (0x04) { 0x69, 0x50, 0xF1, 0x14 }, "layout-id", Buffer (0x04) { 0x0C, 0x00, 0x00, 0x00 }, "model", Buffer (0x1A) { "HD Audio Conexant Cx20585" }, "name", Buffer (0x11) { "Conexant Cx20585" }, "device_type", Buffer (0x11) { "Audio Controller" }, "PinConfigurations", Buffer (One) { 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Hey, thanks for Mini-Guide . I tried the AppleHDA.kext but looks like it doesn't work with my W520. Can you explain how? Did you get the same brightness level after a reboot? Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 18, 2012 Share Posted January 18, 2012 I've seen this guide yesterday. Good work! Everything works except that the sleep on psu will not work. The ThinkPad goes to sleep, but 2 seconds later it wakes up. Is there a little tool for the menubar to switch from the speakers to headphones? I have a T510 4349 with nVidia NVS 3100m (512MB). Link to comment Share on other sites More sharing options...
joshhh Posted January 18, 2012 Author Share Posted January 18, 2012 For sleep on psu check my dsdt in sections UHCI1/UHCI2 and replace its content, after that sleep should work perfect Everything works except that the sleep on psu will not work. The ThinkPad goes to sleep, but 2 seconds later it wakes up. If you still use VoodooHDA you can switch speakers with Alt/Option+Click, for AppleHDA auto switching works perfect itself Is there a little tool for the menubar to switch from the speakers to headphones? Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 19, 2012 Share Posted January 19, 2012 Thanks, i have installed Lion new and i found a bug in the applehda kext or in the dsdt. If I turn the sound with the - button to no mute, the volume bar in the menubar is at 0 percent. If i press the + volume button on the keyboard, the volume bar at the menubar is at 95% and the thinkpad displays 1 from 15?. So the sound volume display isn't sync. The turbo fan mode is also broken. However, the hdd was recognized as an external hdd. (The hdd is in the ultrabay, the ssd with win7 is in the hdd bay) The sleep was fixed with the new install. But anyways, your work is great. I'm happy to have osx on my T510 Update: At home I'm using a Docking Station, so i've tested 2 things: Audio isn't working No Displayport-port isn't working Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 21, 2012 Share Posted January 21, 2012 Can you share the updated files from the 21.01.2012 Update? I would like to test the new Displayport-feature It's great to see someone that wants a T510 with Lion. Have you a docking station? I would like to use the external screen in the dock without the internal display - like a real mac Update 21-01-2012 19:51: I've seen your "easy install" zip file, just great. I would remove the default partition from the plist. Just a little tip from me. By the way, any solution for the fingerprint reader? Link to comment Share on other sites More sharing options...
joshhh Posted January 21, 2012 Author Share Posted January 21, 2012 I recommend you to see my latest updates above. Try to update your installation with all my kexts and dsdt Yes this may occur with AppleHDA until I get correct pin configuration of CX20585 codec. Now It works 99% perfect with sound. Thanks, i have installed Lion new and i found a bug in the applehda kext or in the dsdt. If I turn the sound with the - button to no mute, the volume bar in the menubar is at 0 percent. If i press the + volume button on the keyboard, the volume bar at the menubar is at 95% and the thinkpad displays 1 from 15?. So the sound volume display isn't sync. I've changed Turbo fan mode to silent mode. If you need this check ghotic860 post about osx on w520 The turbo fan mode is also broken. That strange about hdd. Mine default hdd shows as internal. eSATA and SataLink card hdds as external as it should be. However, the hdd was recognized as an external hdd. (The hdd is in the ultrabay, the ssd with win7 is in the hdd bay) I've changed some things about sleep in latest changes(USB and bluetooth detection) The sleep was fixed with the new install. About docking station. Please check my latest edits, I've fixed DisplayPort detection and maybe it will work with Dock now About sound via docking station, I need more info about that. Maybe some switches inside lock sound or it electronically enabled/disabled. Need more info from ioreg to deal with. Update: At home I'm using a Docking Station, so i've tested 2 things: Audio isn't working No Displayport-port isn't working 1 Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 21, 2012 Share Posted January 21, 2012 (edited) So, i've installed your update, i found something that will interest you: I found why the hdd is recognized as a external drive: HDD-bay SSD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT0@0/PMP@0 Ultrabay HDD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT1@1/PMP@0 The macbook pro has only one hdd, the second hard drive or sad must be external. It's cosmetic, i have to change the drives. I found that you fixed the display with F14 and F15, nice! You know "About your mac"? There is a little bug, my Thinkpad shows "spdisplays_display" integrated. The next things are the important things: Sound isn't working if the headphones are connected with the dock. The internal display is on while the TP is in the docking station, it should be of in the docking station Lion is after about 1 minute usable, while this time, i cannot click or write, but i am able to move the cursor. Ethernet is buggy, i have sometimes a APIPA adress, but after sleep it works again. The sound works with the 21.01.2012 Update very well. If i can help you with the docking station problem, feel free to ask! Edited January 21, 2012 by Erdbeeere Link to comment Share on other sites More sharing options...
joshhh Posted January 22, 2012 Author Share Posted January 22, 2012 I'll check this thing, should be easy. I did masking on my desktop hackinposh I found why the hdd is recognized as a external drive:HDD-bay SSD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT0@0/PMP@0 Ultrabay HDD: IODeviceTree:/PCI0@0/SAT1@1F,2/PRT1@1/PMP@0 The macbook pro has only one hdd, the second hard drive or sad must be external. It's cosmetic, i have to change the drives. Thats voodoops2 fix. Ideal way map brightness to system fn+home/end I found that you fixed the display with F14 and F15, nice! This possible. Guide later to come You know "About your mac"? There is a little bug, my Thinkpad shows "spdisplays_display" integrated. I need two linux codec dumps from ubuntu 10.04 live cd run in terminal cat /proc/asound/card0/codec#0 > ~/Desktop/codecDump0.txt or cat /proc/asound/card0/codec#1 > ~/Desktop/codecDump1.txt or cat /proc/asound/card0/codec#2 > ~/Desktop/codecDump2.txt do it with dock and without Sound isn't working if the headphones are connected with the dock. The sound works with the 21.01.2012 Update very well. If i can help you with the docking station problem, feel free to ask! Now I'm try to figure out this bug with freeze screen after boot. You can temporary try to use GraphicsEnabler=Yes to fix that until dsdt section will be corrected The internal display is on while the TP is in the docking station, it should be of in the docking station Lion is after about 1 minute usable, while this time, i cannot click or write, but i am able to move the cursor. Didn't have ethernet problems at all before I replaced wi-fi intel module to atheros 9285 and start using only wi-fi. With some old E1000 next ethernet was unstable but with new one its stable Ethernet is buggy, i have sometimes a APIPA adress, but after sleep it works again. Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 22, 2012 Share Posted January 22, 2012 (edited) Well, here is the dump: t510-audio-dock.zip Update: I enabled the GraphicsEnabler, but no difference. Are you using the wlan card also with Windows 7? If yes, are you able to deactivate the card with FN+F5? However, thats important for me. What wlan card do you recommend for me? eBay is full of cards http://www.ebay.at/i...#ht_3011wt_1165 Update 2: The new AppleIntelE1000e.kext from here have the same bug. If I plugged out the ethernet cable and plug it in, there will be a apipa adress and no adress from my dhcp. However, standby fixes the problem. (Tested in the dock, i havn't tested it with the port on the T510) Edited January 22, 2012 by Erdbeeere Link to comment Share on other sites More sharing options...
joshhh Posted January 22, 2012 Author Share Posted January 22, 2012 Ok I'll check dumps today or maybe tomorrow No, fn+f5 don't do anything with my wlan under osx, under win 7 it deactivate wireless cards. Think its possible to fix with dsdt Device (_QXX sections but I don't need it for now For Lenovo T and W series only half height card can be installed Here is list of card with native support: Atheros AR5B91 b/g up to 54mbps Atheros AR5B93 2.4ghz b/g/n up to 150mbps in OSX Atheros AR5BHB92 2.4 and 5ghz a/b/g/n up to 150mbps in OSX on 2.4ghz and up to 300 on 5ghz Broadcom BCM94322HM8L 2.4 and 5ghz a/b/g/n up to 150mbps in OSX on 2.4ghz and up to 300 on 5ghz On desktop hack I used AR5BXB92 full height card from 2010 iMac, this card doesn't fit lenovo slot without little dremeling magnesium chassis of laptop. So I temporary replace Intel Wi-Fi Link 1000 to AR9285 from brother's laptop. Asus has this card locked to b/g mode so max speed is only 54mbps. AR9285 with enabled N mode can operate up to 65mbps because of 1x1 MIMO configuration, that's why OSX driver drops speed from 150mbps as possible with 1x2 and 2x2 configs. So the best card I think is half AR9280 or possible AR9380 3x3 MIMO up to 450mbps on 5ghz. I ordered AR5BHB112 AR9380 card few weeks ago for replacement of AR9280. http://www.ebay.at/s...-All-Categories Well, here is the dump: t510-audio-dock.zip Update: I enabled the GraphicsEnabler, but no difference. Are you using the wlan card also with Windows 7? If yes, are you able to deactivate the card with FN+F5? However, thats important for me. What wlan card do you recommend for me? eBay is full of cards http://www.ebay.at/i...#ht_3011wt_1165 Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 22, 2012 Share Posted January 22, 2012 The unuasble-time after start is about 140 seconds, i changed the GraphicsEnabler to yes, but no difference. Maybe you are able to fix the bug with the screen: The ThinkPad is closed, only the external display at display-port should be display osx. I mean that only external devices should display something if the notebook is closed bud on. I've seen jet that you are using a modded BIOS " BIOS with removed whitelist + small DSDT mod + terminal" What do you mean with small DSDT mod? Is that maybe the reason that the fan control doesn't work? Next thing that i have changed are the drives. I put the Lion HDD into the HDD-Bay and yet it is shown as a internal HDD - Great! Are you able to share the BIOS-Update with us? I prefer BIOS Updates as a ISO Link to comment Share on other sites More sharing options...
joshhh Posted January 22, 2012 Author Share Posted January 22, 2012 I figured out freeze problem. That was HDMI audio patch. So I removed code from DSDT and replaced AppleHDA with older one No freeze now and DisplayPort working fine with it AppleHDA+dsdt-fixed-screen-freez.zip The unuasble-time after start is about 140 seconds, i changed the GraphicsEnabler to yes, but no difference. Maybe you are able to fix the bug with the screen: The ThinkPad is closed, only the external display at display-port should be display osx. I mean that only external devices should display something if the notebook is closed bud on. I'll try to figure out this case if it's possible Maybe you are able to fix the bug with the screen: The ThinkPad is closed, only the external display at display-port should be display osx. I mean that only external devices should display something if the notebook is closed bud on. Ok I patched Lenovo bios version 1.47 to remove whitelist both WLAN and WWAN card slots. It works fine Also found 1.48 version patched by one man Whitelisted BIOS Lenovo T510/510i Len_T510_6muj27us_NWL_ByCamiloml-1.48.zip Small dsdt mod is to be able use AR9285 card that is not supported by default in osx. For cards listed above this mod is not necessary To fix fan control on ThinkVantage button find Method (_Q19, 0, NotSerialized) and replace code to following, after that fan boost should work Method (_Q19, 0, NotSerialized) { Name (FANS, One) Store (HFSP, FANS) XOr (FANS, 0x40, Local0) If (Local0) { LED (0xFF, 0x80) Store (0x40, HFSP) } Else { LED (0xFF, 0x80) Store (0x80, HFSP) } } I've seen jet that you are using a modded BIOS " BIOS with removed whitelist + small DSDT mod + terminal" What do you mean with small DSDT mod? Is that maybe the reason that the fan control doesn't work? Next thing that i have changed are the drives. I put the Lion HDD into the HDD-Bay and yet it is shown as a internal HDD - Great! Are you able to share the BIOS-Update with us? I prefer BIOS Updates as a ISO Here is guide how to fix this annoying spdisplay [GUIDE] How to fix [spdisplays_display] in About This Mac window spdisplay Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 23, 2012 Share Posted January 23, 2012 Thanks, the ThinkPad isn't hanging up anymore Great! Update: I found a solution for the fingerprint reader: http://support.authentec.com/Downloads/DownloadManager.aspx?EntryId=50 The TrueSuiteLion_5.0.0.18.dmg works, but it has bugs. You can't compare it with the Windows version. 1 Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 24, 2012 Share Posted January 24, 2012 If tested OSX few days and in my opinion OSX Lion is running very stable and fast on the T510. There are some bugs at the moment. joshhh, if you have time please fix it Just a summary: - audio isn't shown the correct volume if i am using the speaker of the notebook - mic can't be muted with the button on the keyboard (unnessesary, i know) - the internal display is active if the display is closed and a external display is connected - the internal display should be of - Fingerprint is buggy with the official driver from authentec That components never worked: Intel WLAN (I ordered on ebay another card, I am waiting for it) Gobi 2000 WWAN Card (Just draming for a working solution ) Link to comment Share on other sites More sharing options...
joshhh Posted January 25, 2012 Author Share Posted January 25, 2012 I use osx on my T510 about two month and it works perfect I'm working on audio solution now, possible I'll fix slider bug and hdmi audio too display fixing is on the way too fingerprint working not so precise as I expected, faster enter pass with keyboard than 4-5 times to swipe finger on reader, don't use this capabilities now - audio isn't shown the correct volume if i am using the speaker of the notebook - mic can't be muted with the button on the keyboard (unnessesary, i know) - the internal display is active if the display is closed and a external display is connected - the internal display should be of - Fingerprint is buggy with the official driver from authentec That components never worked: Intel WLAN (I ordered on ebay another card, I am waiting for it) Gobi 2000 WWAN Card (Just draming for a working solution ) Link to comment Share on other sites More sharing options...
Erdbeeere Posted January 31, 2012 Share Posted January 31, 2012 So, i've tested Lion one week more and there are two other bugs/limitations: * Don't plug a battery in the notebook while its on, you will receive a OS X Bluescreen. * Final Cut, iMovie and Quick Time isn't able to play mpeg4 videos, its very buggy - I can't use iMovie for video editing, thats bad. Have you found some bugfix for the audio and display? Link to comment Share on other sites More sharing options...
joshhh Posted February 1, 2012 Author Share Posted February 1, 2012 Almost fixed sound bug with slider sound output from dock station is limitation of dock not OSX, there is no any electronics between laptop out and dock out, only mechanical switch somewhere Screen disable is not yet finally tested So, i've tested Lion one week more and there are two other bugs/limitations: * Don't plug a battery in the notebook while its on, you will receive a OS X Bluescreen. * Final Cut, iMovie and Quick Time isn't able to play mpeg4 videos, its very buggy - I can't use iMovie for video editing, thats bad. Have you found some bugfix for the audio and display? Link to comment Share on other sites More sharing options...
joshhh Posted February 4, 2012 Author Share Posted February 4, 2012 LAN Intel E1000 kext not working after 10.7.3 update, need something to deal with it AR9285 not working too, but if I revert to 10.7.2 driver it's working again Link to comment Share on other sites More sharing options...
acediac Posted February 5, 2012 Share Posted February 5, 2012 LAN Intel E1000 kext not working after 10.7.3 update, need something to deal with it AR9285 not working too, but if I revert to 10.7.2 driver it's working again I just updated to 10.7.3 and my Intel E1000 is working. In fact there is no new kext for it in the update, so not sure why yours is not working. Maybe reinstall the files? I have attached my kext if you want to compare. I have BRCM4322 wireless and that is also working without needing changes. AppleIntelE1000e.kext.tar.gz 1 Link to comment Share on other sites More sharing options...
Tetonne Posted February 7, 2012 Share Posted February 7, 2012 Thanks for this stuff in fact i have a T410, i'll try your source on it. It's a pleasure to see a community that seems to live :-). i propose to feed back about my T410 and yours stuff even if i cannot modify my bios (locked with password) best regards Link to comment Share on other sites More sharing options...
joshhh Posted February 7, 2012 Author Share Posted February 7, 2012 T410 is absolutely working solution for OSX with Intel3000HD or Nvidia discrete graphics, other things is almost same as in T510 Ask your questions for help And I think you can find whitelisted bios on mydigitallife.com site in bios request section Thanks for this stuff in fact i have a T410, i'll try your source on it. It's a pleasure to see a community that seems to live :-). i propose to feed back about my T410 and yours stuff even if i cannot modify my bios (locked with password) best regards 1 Link to comment Share on other sites More sharing options...
Tetonne Posted February 7, 2012 Share Posted February 7, 2012 T410 is absolutely working solution for OSX with Intel3000HD or Nvidia discrete graphics, other things is almost same as in T510 Ask your questions for help And I think you can find whitelisted bios on mydigitallife.com site in bios request section Waoou Thanks for the tip but i think that the bios update is not possible on my firm's computer (bitlocked), it ask for the 128bit key :-( AHCI mode OK now Link to comment Share on other sites More sharing options...
joshhh Posted February 8, 2012 Author Share Posted February 8, 2012 You can check your hdd connection state from windows with tool like AIDA 64 In my case AHCI was enabled by default Waoou Thanks for the tip but i think that the bios update is not possible on my firm's computer (bitlocked), it ask for the 128bit key :-( i'm preparing the hackintosh hd even i'm not able to change AHCI as asked there "be sure in your BIOS under Config > SATA > Mode Option is set to AHCI" tips are welcome ;-) as Erdbeeere begin on T410 treat All the best do i have to change something for busration it is 18 here? Link to comment Share on other sites More sharing options...
Recommended Posts