Mohamed Khairy Posted July 31, 2014 Author Share Posted July 31, 2014 Mohamed Khairy can you post a DSDT extraction and patches to apply for our dell n5110 ? i attached three patched dsdt isnt worked for you ? if you want patches you can extract your orginal dsdt and use any diif program like one on xocde and see changes and patches Link to comment Share on other sites More sharing options...
radu.m.toader Posted July 31, 2014 Share Posted July 31, 2014 the fresh extracted DSDT does not compile.. what should I do about the errors given there, delete methods with those unknown identifiers ? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted July 31, 2014 Author Share Posted July 31, 2014 Hi Mohamed Khairy, I have questions about the Guide: 1. How Can I format entire the HDD as what, then Windows and OS X can use the same "DATA" partition? 2. Please provide more description when the "install progress" from USB flash completed 100% -> reboot Have a good day, thank you! don't understand your Q but again the most important point is to make OS X partition is the last one about install just when you install you will understand what i said don't worry the fresh extracted DSDT does not compile.. what should I do about the errors given there, delete methods with those unknown identifiers ? do you have problem with ones on guide ? any way upload your extracted one here and see the problem Link to comment Share on other sites More sharing options...
vanquybn Posted July 31, 2014 Share Posted July 31, 2014 don't understand your Q but again the most important point is to make OS X partition is the last one about install just when you install you will understand what i said don't worry Example: I have a HDD with 3 partition: 1: Windows, 2: Data, 3: OSX. So what is format type of "Data partition" that I can read/write file/data from Windows and OSX to this partition ("2: Data")? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted July 31, 2014 Author Share Posted July 31, 2014 Example: I have a HDD with 3 partition: 1: Windows, 2: Data, 3: OSX. So what is format type of "Data partition" that I can read/write file/data from Windows and OSX to this partition ("2: Data")? if you want to use this partion to write/read on both system choose exfat 1 Link to comment Share on other sites More sharing options...
TimeWalker75a Posted August 1, 2014 Share Posted August 1, 2014 Hey, Mohamed. Does your 15R has an option in BIOS to enable POST sound? Someone with an Asus laptop with AMI bios has reported that with POST sound disabled they had no sound in UEFI Windows too. Enabling the option in BIOS has magically solved the problem. 1 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 1, 2014 Author Share Posted August 1, 2014 Hey, Mohamed. Does your 15R has an option in BIOS to enable POST sound? Someone with an Asus laptop with AMI bios has reported that with POST sound disabled they had no sound in UEFI Windows too. Enabling the option in BIOS has magically solved the problem. thanks searched for this option on bios setting didn't find option like this Link to comment Share on other sites More sharing options...
TimeWalker75a Posted August 1, 2014 Share Posted August 1, 2014 Try this then https://applelife.ru/threads/uefi-clover-dlja-kompjuterov-s-uefi-biosom.36417/page-304#post-458587 1 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 1, 2014 Author Share Posted August 1, 2014 Try this then https://applelife.ru/threads/uefi-clover-dlja-kompjuterov-s-uefi-biosom.36417/page-304#post-458587can't test UEFI Windows right now i installed efi windows folder on windows partition and tries to boot efi but EFI boot loader of windows give blue screen error Link to comment Share on other sites More sharing options...
TimeWalker75a Posted August 1, 2014 Share Posted August 1, 2014 You can't do that .. have to install UEFI from scratch in order to test it. 1 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 1, 2014 Author Share Posted August 1, 2014 You can't do that .. have to install UEFI from scratch in order to test it. i test this method on my pc and it works .... bcdboot c:\windows /s c: /f UEFI but the difference is that on my pc windows setup on separate HDD really dont want now to make a tries again and repartitioning my HDD disk may wait till final release of 10.10 and do it Link to comment Share on other sites More sharing options...
TimeWalker75a Posted August 1, 2014 Share Posted August 1, 2014 Our get a separate hdd and install Windows there ... 1 Link to comment Share on other sites More sharing options...
Florin9doi Posted August 1, 2014 Share Posted August 1, 2014 http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverid=G10JR 11. Fixed issue where the IDT audio device would not appear in device manager when running a UEFI OS. Those idiots have fcked up all sandyBridge bioses and they fixed only business notebooks 1 Link to comment Share on other sites More sharing options...
TimeWalker75a Posted August 1, 2014 Share Posted August 1, 2014 Haha, now try to backport this ... I once spent an entire day comparing modules for L502x to find what broke sleep with new BIOSes. Found what it was in the end ... 2 Link to comment Share on other sites More sharing options...
rezanamazi23 Posted August 2, 2014 Share Posted August 2, 2014 Hello, I have registered in Beta Program for Yosemite. I have downloaded the OSx.app My question is can I update to yosemite just by double clicking on the OSx.app, or should I install it using a usb drive like I did when installing OSX for the first time? Thanks in advance Link to comment Share on other sites More sharing options...
radu.m.toader Posted August 2, 2014 Share Posted August 2, 2014 I have the following problem. when I press command + 1 - writes s, it does not work as command 1 shortcut same for commmand 2. I tried Different version of VoodooPs2Controller, another dsdt... did anywone had this too ? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 2, 2014 Author Share Posted August 2, 2014 I have the following problem. when I press command + 1 - writes s, it does not work as command 1 shortcut same for commmand 2. I tried Different version of VoodooPs2Controller, another dsdt... did anywone had this too ? there is problems with voodoops2keyboard & genericxhci kexts on 10.10 wait for final ... Hello, I have registered in Beta Program for Yosemite. I have downloaded the OSx.app My question is can I update to yosemite just by double clicking on the OSx.app, or should I install it using a usb drive like I did when installing OSX for the first time? Thanks in advance new install better 1 Link to comment Share on other sites More sharing options...
simakwm Posted August 2, 2014 Share Posted August 2, 2014 I installed Mavericks using the old guide and everything is fine so far (except for the ethernet being 10M). But for Yosemite do I really need to enable/use this UEFI things for dual boot with windows? Link to comment Share on other sites More sharing options...
radu.m.toader Posted August 2, 2014 Share Posted August 2, 2014 I found out that because the kext was in debug mode. It has a ifdef debug and for alt which is command by defaut and numbers it generates ADB codes it also points in syslog something like genADB.. that how i figure out 1 Link to comment Share on other sites More sharing options...
radu.m.toader Posted August 3, 2014 Share Posted August 3, 2014 If anyone wan't to try new kext for dell touchpad - It seems that it's working after sleep now. radut-Voodoo-2014-0803.zip 1 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 3, 2014 Author Share Posted August 3, 2014 If anyone wan't to try new kext for dell touchpad - It seems that it's working after sleep now. can you sync your code on your github ----- the kext on guide is from your github will add you to credits when i will complete updating rest of guide Link to comment Share on other sites More sharing options...
mokeev1995 Posted August 3, 2014 Share Posted August 3, 2014 @Mohamed Khairy Hey, man. I've one problem... i update bios of my n5110, but it can't see my USB Flash.. but i'm trying to install mavericks with this guide... and i don't know what's wrong... can you help me? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 3, 2014 Author Share Posted August 3, 2014 @Mohamed Khairy Hey, man. I've one problem... i update bios of my n5110, but it can't see my USB Flash.. but i'm trying to install mavericks with this guide... and i don't know what's wrong... can you help me? had you checked that on setup menu choose Program all Blocks Link to comment Share on other sites More sharing options...
radu.m.toader Posted August 3, 2014 Share Posted August 3, 2014 I have pushed changes to github. https://github.com/radut/OS-X-Voodoo-PS2-Controller/tree/alps_v6 Branch alps_v6. 1 Link to comment Share on other sites More sharing options...
mokeev1995 Posted August 3, 2014 Share Posted August 3, 2014 had you checked that on setup menu choose Program all Blocks Oh, thanks, bro)))) i'm sorry))) Link to comment Share on other sites More sharing options...
Recommended Posts