mokeev1995 Posted January 29, 2016 Share Posted January 29, 2016 Can somebody tell me why is Clover better? I have the following setup Inspiron N5110 (2430M) 500GB HDD (GPT) (3 Partition , first windows, 2nd mac, third for Data+TimeMachine) ALPS TouchPoint Chameleon 2.2 svn2283 8GB RAM (Dual Channel) Front Camera USB (All incl. 3.0) eSATA (Not tested but USB plugged in WORKS) Everything works!! I have installed Yosmitie and i have everything working from TouchPad Scroll, Full Sleep, Brightness Control,HW Sensors. Its to-date perfect setup for me. I never had to made DSDT or SSDT, i used whats available. Just made a TimeMachine backup and now i transffered that to external HD, i can reformat this drive and install again the same backup and everything works flawlessly fine. What else would someone need? Why bother for Clover? Whats so special about it? (Sorry , i didnt had time to go through all of the threads - i am short on time, my apologizes) Anyone could tell me what i am missing? (PS: I have the stable Mac Yosmitie 10.10.5 , never crashed, never hung, never heat up and i am using almost 20-25 apps at a single time) Looking forward.!! clover uses built in EFI if exists or emulates it with rEFIt chameleon/chimera only emulates EFI if your system has (U)EFI it's better to use clover instead of chameleon or chimera Link to comment Share on other sites More sharing options...
ezee Posted January 29, 2016 Share Posted January 29, 2016 If you have fully working setup, stick to it..when you will decide to re-install then come to this thread and install using Clover for UEFI unlocked board Link to comment Share on other sites More sharing options...
kenjiloc Posted January 30, 2016 Share Posted January 30, 2016 After update 10.11.3, my Mac losts audio, so how to fix it https://youtu.be/DNNzvjBBDhE My kext and config: http://www.mediafire...FI-Kenjiloc.zip Link to comment Share on other sites More sharing options...
ezee Posted January 30, 2016 Share Posted January 30, 2016 I have basically used AppleHDA "kexts for El-capitan" and copied the two zlib in it and put that inside S/L/E http://www.mediafire.com/download/yuzzdeypjedng1a/AppleHDA.kext.zip I have to buy a WLAN card to get it wifi working. Which one do you all recommend? There are range of Atheros card with matching interface, can I go with anyone of them? I would prefer card with BT 4 if possible Link to comment Share on other sites More sharing options...
Florin9doi Posted January 31, 2016 Share Posted January 31, 2016 I have to buy a WLAN card to get it wifi working. Which one do you all recommend? There are range of Atheros card with matching interface, can I go with anyone of them? I would prefer card with BT 4 if possible BCM4352 Link to comment Share on other sites More sharing options...
ezee Posted January 31, 2016 Share Posted January 31, 2016 BCM4352 Will BCM4360 work? Its been configured 3x3:3(1.3Gbps). The difference is in interface, 4352 has voids while there is no voids for 4360 https://wikidevi.com/wiki/Broadcom http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions/BCM4360 Link to comment Share on other sites More sharing options...
Florin9doi Posted January 31, 2016 Share Posted January 31, 2016 (edited) On 1/31/2016 at 5:12 PM, ezee said: Will BCM4360 work? Its been configured 3x3:3(1.3Gbps). The difference is in interface, 4352 has voids while there is no voids for 4360 https://wikidevi.com/wiki/Broadcom http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions/BCM4360 You need a half size pcie card because the full size slot (WWAN) present in Dell N5110 is USB only. The only half size card which use BCM4360 is BCM94360HMB but - it needs 3 antennas - it uses a new type of antenna connectors You can install it, but you need to change/add antennas. BCM4352 is plug and play. You don't need anything else. Edited September 25, 2019 by Florin9doi 1 Link to comment Share on other sites More sharing options...
mokeev1995 Posted February 1, 2016 Share Posted February 1, 2016 I have basically used AppleHDA "kexts for El-capitan" and copied the two zlib in it and put that inside S/L/E http://www.mediafire.com/download/yuzzdeypjedng1a/AppleHDA.kext.zip I have to buy a WLAN card to get it wifi working. Which one do you all recommend? There are range of Atheros card with matching interface, can I go with anyone of them? I would prefer card with BT 4 if possible azurewave aw-ce123h ( http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=azurewave+aw-ce123h&_sacat=0 ) with this card you can use airdrop and continuity, as i know :-) try to use it 1 Link to comment Share on other sites More sharing options...
ezee Posted February 2, 2016 Share Posted February 2, 2016 azurewave aw-ce123h ( http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=azurewave+aw-ce123h&_sacat=0 ) with this card you can use airdrop and continuity, as i know :-) try to use it any difference between the two... BroadCom BCM4352 BCM94352HMB BCM4352 azurewave aw-ce123h there are few more like DW1550 BCM4352 so much confusing http://www.aliexpress.com/w/wholesale-bcm4352.html?spm=2114.01010208.0.325.6Fl7C8&site=glo&groupsort=1&SortType=price_asc&g=y&SearchText=bcm4352&isUnitPrice=y&initiative_id=SB_20160202033112&shipCountry=IN&needQuery=n&isRtl=yes I found this one, I hope this is one would be good to buy http://www.aliexpress.com/item/AzureWave-AW-CE123H-BCM4352-BCM94352HMB-Half-Mini-PCIe-PCI-express-802-11AC-867Mhz-Wireless-WIFI-WLAN/32472259138.html?spm=2114.01010208.3.206.NU7F6u&ws_ab_test=searchweb201556_3,searchweb201644_1_505_506_503_504_502_10001_10002_10016_10005_10006_10003_10004,searchweb201560_2,searchweb1451318400_-1,searchweb1451318411_6451&btsid=c2330f1f-4f8a-4346-961b-7213883d7bf2 Link to comment Share on other sites More sharing options...
rezsicc Posted February 2, 2016 Share Posted February 2, 2016 Hello guys, Could you help me, please? Which version of OS X works smoothly? Would be El Captain good if I installed it? Do kexts work perfectly? Because I saw that some functions aren't available. Or is Yosemite still better? I had ML few years ago. Do I only need to use the description of page 1? Is it up-to-date? Link to comment Share on other sites More sharing options...
mokeev1995 Posted February 2, 2016 Share Posted February 2, 2016 Link to VoodooPS2Controller: http://www.filedropper.com/voodoops2controllerkext-2016-01-15 I have facetime, appstore,imessages working on chameleon(enoch 2773) with macbook pro 8,1 SMBios. I had Yosemite and all was working except turbo boost, even sleep was working, also with Chameleon bootloader. Do you think it will break the boot even if i have Chameleon? I mean if i flash that Bios? If anyone is interested i can make a guide for chameleon installing, but first it's needed to repair the sleep so it can be a fully functional guide. Thank you @ezee for the tip about Turbo Boost P.S. I have used a DSDT for i7 provided by kenjiloc and it would use multiplier x28 on my i5 getting it to 2.77ghz getting score of 4666 in geekbench 3 (32bit) with i5 DSDT i get 4090 score. The onlything it was that power management wasn't working.so always 2.77ghz 60*C idle(not good for cpu) can you send this kext one more time and via Google Drive/Mega or something like that? Link to comment Share on other sites More sharing options...
ptcptc Posted February 3, 2016 Share Posted February 3, 2016 http://www.megafileupload.com/62b7/VoodooPS2Controller.kext.zip Remember to delete all ps2 kexts form S/L/E: ApplePS2 VoodooPS2. Can anyone help me fix the sleep for el capitan with chameleon? Thank you very much 1 Link to comment Share on other sites More sharing options...
mokeev1995 Posted February 3, 2016 Share Posted February 3, 2016 http://www.megafileupload.com/62b7/VoodooPS2Controller.kext.zip Remember to delete all ps2 kexts form S/L/E: ApplePS2 VoodooPS2. Can anyone help me fix the sleep for el capitan with chameleon? Thank you very much last my attempt shows that all you needed -- run kext utility and drag&drop this kext (i use yosemite, so don't know if it works in el capitan) ----- HERE IS LINK IN GOOGLE DRIVE: https://drive.google.com/open?id=0B7C42B_4OyzTRFRNWkx4el9iM3c Link to comment Share on other sites More sharing options...
ptcptc Posted February 4, 2016 Share Posted February 4, 2016 Hey, I found what is the problem with sleep. When i disable some USB kexts the sleep works. But i don't know how to fix it, i think it's usb 3.0 the problem because: When i plug anything in usb 3.0(even if i take it out after) when i try to shut down or reboot, it hangs like it hangs when i try to put it to sleep(black screen, usb power cut off, fans working ) And i don't think it s DSDT related because without DSDT sleep not work.(and on yosemite sleep worked without DSDT) Thank you in advance for anyone who tries to igure this out Link to comment Share on other sites More sharing options...
rezsicc Posted February 5, 2016 Share Posted February 5, 2016 Dell Wireless 1702 can't run Continuity, for example, and has older versions of bluetooth and wi-fi (bt 3.0+hs, 802.11b/g/n). New card supports all new features of OS X 10.10 like Continuity and has new versions (bt4, 802.11 b/g/n/ac). So, this card (1702) works fine but without new features... and for me without 802.11n (don't know why)... Dear mokeev1995, So my notebook is not able to send any content to iPhone (like pics)? If I install yosemite won't airdrop function work? https://support.apple.com/en-us/HT203106 If it is true it makes no sense to upgrade from mavericks to yosemite. Link to comment Share on other sites More sharing options...
mokeev1995 Posted February 5, 2016 Share Posted February 5, 2016 Dear mokeev1995, So my notebook is not able to send any content to iPhone (like pics)? If I install yosemite won't airdrop function work? https://support.apple.com/en-us/HT203106 If it is true it makes no sense to upgrade from mavericks to yosemite. yeah, our Wi-Fi+BT card don't support airdrop and continuity. if you want this you should replace it with compatible card like azurewave aw-ce123h. if you'll do this then you'll have Wi-Fi 802.11b/g/n/ac support and Bluetooth 4.0 Link to comment Share on other sites More sharing options...
ezpzsolutions Posted February 6, 2016 Share Posted February 6, 2016 hey will u please help me in os x el capitan mac app store if it is workied for you help me please Link to comment Share on other sites More sharing options...
ezee Posted February 6, 2016 Share Posted February 6, 2016 try this:- $ sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist restart and connect Link to comment Share on other sites More sharing options...
scdr Posted February 14, 2016 Share Posted February 14, 2016 ptcptc thanks for your post #2821 !!! Just drop the idea of installing El Capitan, when I read the 17 steps. Thank you again! Link to comment Share on other sites More sharing options...
ezee Posted February 15, 2016 Share Posted February 15, 2016 sleep is working..hibernate won't anyway Link to comment Share on other sites More sharing options...
LuckyLuck Posted February 18, 2016 Share Posted February 18, 2016 Hi all,is there any solution for USB 3.0 for 10.11.3 ? can't get it work with GenericUSBXHCI.kext Link to comment Share on other sites More sharing options...
kilu Posted February 20, 2016 Share Posted February 20, 2016 Hi How to remove odf EFI entries from Boot Menu in mod bios? Link to comment Share on other sites More sharing options...
mokeev1995 Posted February 21, 2016 Share Posted February 21, 2016 Hi How to remove odf EFI entries from Boot Menu in mod bios? IMG_20160220_162202.jpg try to clear nvram and cmos. or flash modded bios again with rewriting all sections, it should help Link to comment Share on other sites More sharing options...
Florin9doi Posted February 21, 2016 Share Posted February 21, 2016 Hi How to remove odf EFI entries from Boot Menu in mod bios? IMG_20160220_162202.jpg https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg Link to comment Share on other sites More sharing options...
Elite2k Posted February 22, 2016 Share Posted February 22, 2016 https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg Hi, this happened to me in the past as well.. these multiple enteries.. I simply re installed the bios / re loaded it and all was clear its the easiest method Link to comment Share on other sites More sharing options...
Recommended Posts