Julio Vargas Posted March 11, 2014 Share Posted March 11, 2014 Hello everyone. I have a problem with the HDMI port in Windows 8.1 does not work (no video and no audio). Someone could fix this. thanks Link to comment Share on other sites More sharing options...
rob1980 Posted March 12, 2014 Share Posted March 12, 2014 Hello everyone. I have a problem with the HDMI port in Windows 8.1 does not work (no video and no audio). Someone could fix this. thanks using modded bios? UEFI bios? standard bios? 1 Link to comment Share on other sites More sharing options...
Julio Vargas Posted March 12, 2014 Share Posted March 12, 2014 I´m using modded bios Link to comment Share on other sites More sharing options...
vanquybn Posted March 12, 2014 Share Posted March 12, 2014 I´m using modded bios I guess that his mean what is version of bios mod (UEFI or Legacy BIOS) that you are using. Link to comment Share on other sites More sharing options...
rob1980 Posted March 12, 2014 Share Posted March 12, 2014 I guess that his mean what is version of bios mod (UEFI or Legacy BIOS) that you are using. Exactly as this!!, the reason I ask which bios, is because the UEFI bios is in effect, still being tested out by those who have wanted to try it out early, i.e., before a final release / guide. There may well be a few bugs, including some in windows that have not been experienced by others yet. It may not be bios related at all, in which case it would be interesting to know if HDMI was tested on this laptop previous to installing OSX, has another cable, and another monitor been tested to tule out external hardware issues. Do you have dual graphics? is one of the graphics cards disabled? Does the HDMI on this laptop run from the HD3000 or other graphics card... another thing to check. Does HDMI work in OSX? Provide everyone with as much info as you can, what you have done, what you have tested etc.. 1 Link to comment Share on other sites More sharing options...
Denial Steinberg Posted March 13, 2014 Share Posted March 13, 2014 how to configure chameleon, before installing on a flash drive? Link to comment Share on other sites More sharing options...
radu.m.toader Posted March 16, 2014 Share Posted March 16, 2014 Hi, I have i7 2670QM with 16 gb of ram, nvidia gt525m 1gb and I am stuck at the spinning logo or the black screen when using -v. I followed precisely the pre install and the video on the first post.. what is wrong ? (PS - i also have the latest bios mod by florin2) Link to comment Share on other sites More sharing options...
sokinso Posted March 17, 2014 Share Posted March 17, 2014 Hi.is that the screen you are getting too?<br /><br /> uploadfromtaptalk1394216706348.jpg<br /><br /><br />Hi,<br />I have i7 2670QM with 16 gb of ram, nvidia gt525m 1gb and I am stuck at the spinning logo or the black screen when using -v.<br />I followed precisely the pre install and the video on the first post.. what is wrong ? <br />(PS - i also have the latest bios mod by florin2)<br /><br />A screen like that?<br />I had some trouble too..but now is ok.. Link to comment Share on other sites More sharing options...
radu.m.toader Posted March 17, 2014 Share Posted March 17, 2014 <br /><br /><br /><br />A screen like that?<br />I had some trouble too..but now is ok.. Like that... what did you do to pass it ? Link to comment Share on other sites More sharing options...
sokinso Posted March 18, 2014 Share Posted March 18, 2014 Like I explained you... Maybe the 10.9.2 update messes up the installation process...does this guide need to be updated? 1 Link to comment Share on other sites More sharing options...
Denial Steinberg Posted March 19, 2014 Share Posted March 19, 2014 how to edit mpkg ? Link to comment Share on other sites More sharing options...
radu.m.toader Posted March 20, 2014 Share Posted March 20, 2014 In 10.8 my wifi card worked, now in 10.9 it doesn't work anymore.. wifi card : Atheros_AR5B197 - Combo card - Wi-Fi (AR9287) 2x2 bgn + Bluetooth (AR3011) bluetooth works but wifi don't Link to comment Share on other sites More sharing options...
Krists Posted March 20, 2014 Share Posted March 20, 2014 Hi! It seems everyone here talks about the last gen N5110's with upgraded CPU's, but will this tutorial also works on the first gen DELL N5110 I5-480M HD5650? A year ago I tried to patch bios with the file listed in the first page, but BIOS flashing soft said the file is not compactible with my current laptop, so I did not even went further. Also , the laptop was running fine on 10.8, full graphics, sound support without any BIOS mod. Last night I sucessfully installed Niresh's OSX 10.9 on GUID'ed partition. I didn't have a time to play around, but things that didn't work: 1. resolution not correct 2. no graphics accelleration 3. CPU on full power mode 4. SLEEP did not work 5. No brightness FN control, of course Audio works, keyboard works , touchpad works. I am sure I should start with modding bios, and only then try to install everything as per tutorial (clean install with pure Mavericks from itunes). But the main question is if it's possible to mod BIOS for this I5-480M N5110? Is it even running compatible BIOS? Or, perhaps I must get the last BIOS from DELL for this laptop and mod it myself as per this tutorial? http://www.insanelymac.com/forum/topic/279576-dell-inspiron-15r-n5110-native-speedstep-bios-modding/ Thanks for everyone sharing their experience and knowledge! Link to comment Share on other sites More sharing options...
vanquybn Posted March 21, 2014 Share Posted March 21, 2014 Hi! It seems everyone here talks about the last gen N5110's with upgraded CPU's, but will this tutorial also works on the first gen DELL N5110 I5-480M HD5650? A year ago I tried to patch bios with the file listed in the first page, but BIOS flashing soft said the file is not compactible with my current laptop, so I did not even went further. Also , the laptop was running fine on 10.8, full graphics, sound support without any BIOS mod. Last night I sucessfully installed Niresh's OSX 10.9 on GUID'ed partition. I didn't have a time to play around, but things that didn't work: 1. resolution not correct 2. no graphics accelleration 3. CPU on full power mode 4. SLEEP did not work 5. No brightness FN control, of course Audio works, keyboard works , touchpad works. I am sure I should start with modding bios, and only then try to install everything as per tutorial (clean install with pure Mavericks from itunes). But the main question is if it's possible to mod BIOS for this I5-480M N5110? Is it even running compatible BIOS? Or, perhaps I must get the last BIOS from DELL for this laptop and mod it myself as per this tutorial? http://www.insanelymac.com/forum/topic/279576-dell-inspiron-15r-n5110-native-speedstep-bios-modding/ Thanks for everyone sharing their experience and knowledge! You should try patch your dsdt first. Link to comment Share on other sites More sharing options...
sokinso Posted March 21, 2014 Share Posted March 21, 2014 Hi! It seems everyone here talks about the last gen N5110's with upgraded CPU's, but will this tutorial also works on the first gen DELL N5110 I5-480M HD5650? A year ago I tried to patch bios with the file listed in the first page, but BIOS flashing soft said the file is not compactible with my current laptop, so I did not even went further. Also , the laptop was running fine on 10.8, full graphics, sound support without any BIOS mod. Last night I sucessfully installed Niresh's OSX 10.9 on GUID'ed partition. I didn't have a time to play around, but things that didn't work: 1. resolution not correct 2. no graphics accelleration 3. CPU on full power mode 4. SLEEP did not work 5. No brightness FN control, of course Audio works, keyboard works , touchpad works. I am sure I should start with modding bios, and only then try to install everything as per tutorial (clean install with pure Mavericks from itunes). But the main question is if it's possible to mod BIOS for this I5-480M N5110? Is it even running compatible BIOS? Or, perhaps I must get the last BIOS from DELL for this laptop and mod it myself as per this tutorial? http://www.insanelymac.com/forum/topic/279576-dell-inspiron-15r-n5110-native-speedstep-bios-modding/ Follow the post installation steps... Thanks for everyone sharing their experience and knowledge! Link to comment Share on other sites More sharing options...
TimeWalker75a Posted March 21, 2014 Share Posted March 21, 2014 Hi! It seems everyone here talks about the last gen N5110's with upgraded CPU's, but will this tutorial also works on the first gen DELL N5110 I5-480M HD5650? Your model is not N5110, but N5010, which has HM57 chipset and first generation Intel Core i-processor. Link to comment Share on other sites More sharing options...
vanquybn Posted March 26, 2014 Share Posted March 26, 2014 Hi! I'm running Mavericks 10.9.2 on my Dell Inspiron N5110 (i7-2630QM, 6GB RAM DDR3, nVidia GT 525M and 640GB HDD), but I have three problems: 1. I couldn't find any AppleHDA.kext patched for my IDT 92HD87B1, so I'm using VoodooHDA, but I've got other issues: i. The "Mute" button from the keyboard doesn't work. It shows that mute image, but the volume isn't muted. Originally, the volume slider didn't work either, but I fixed that editing the .plist file inside the .kext. ii. The sound is fuzzy. 2.My VGA port doesn't always work, it works only after sleep. 3. If I boot my laptop now and set the brightness to 100% (it looks more like 50%), put the laptop to sleep and then wake it up, the display is even brighter (the real 100%). This is not a major issue, it's just for aesthetic purpose, but it might be related two 2. YOu should try bios mod and dsdt patch on the Post#1 of this topic. my laptop every thing work fine! 1 Link to comment Share on other sites More sharing options...
mahounis Posted March 28, 2014 Share Posted March 28, 2014 good day, 1)I updated the bios mod A11, now a fan spinning at maximum speed .how old bios or what to do now? 2)Maverics OS setup installation stops at AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving). dell 5110-8507 sorry for my english , best regards. 1 Link to comment Share on other sites More sharing options...
nvpthinh Posted March 29, 2014 Share Posted March 29, 2014 Please help me, I'm using: Dell Inspiron N5110Intel Core i5 2430MIntel HD Graphics 3000 and NVIDIA GeForce GT 525M I'm sure that I've followed exactly the instruction on #1 post. I've also tried both Have Nvidia and No have Nvidia DSDT. But I still get set stuck in Apple Loading screen. Link to comment Share on other sites More sharing options...
nvpthinh Posted March 29, 2014 Share Posted March 29, 2014 good day, 1)I updated the bios mod A11, now a fan spinning at maximum speed .how old bios or what to do now? 2)Maverics OS setup installation stops at AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving). dell 5110-8507 sorry for my english , best regards. same problem here Link to comment Share on other sites More sharing options...
mahounis Posted March 29, 2014 Share Posted March 29, 2014 same problem here Yes ! Its my problem too how to fix this ? Link to comment Share on other sites More sharing options...
vanquybn Posted March 31, 2014 Share Posted March 31, 2014 Please help me, I'm using: Dell Inspiron N5110 Intel Core i5 2430M Intel HD Graphics 3000 and NVIDIA GeForce GT 525M I'm sure that I've followed exactly the instruction on #1 post. I've also tried both Have Nvidia and No have Nvidia DSDT. But I still get set stuck in Apple Loading screen. You should delete AppleRTL8169Ethernet.kext then try boot again with flag: -f -x -v Link to comment Share on other sites More sharing options...
nvpthinh Posted March 31, 2014 Share Posted March 31, 2014 You should delete AppleRTL8169Ethernet.kext then try boot again with flag: -f -x -v I did but still get stuck Link to comment Share on other sites More sharing options...
vanquybn Posted April 1, 2014 Share Posted April 1, 2014 I did but still get stuck it's fine, you need wait some min (about 5 min) to start to install screen. Link to comment Share on other sites More sharing options...
mahounis Posted April 1, 2014 Share Posted April 1, 2014 I did but still get stuck path USB/Extra/Extension ? rigth ? Link to comment Share on other sites More sharing options...
Recommended Posts