Mohamed Khairy Posted October 6, 2013 Author Share Posted October 6, 2013 Guide update to 10.9 is Done Contents Some information you need to know to bypass installation without panic or still waiting for root . Bios mod --> latest bios mods for native power management and vesa mode . Pre Install --> preparing your Usb Flash Memory for installation . Post Install --> Finishing installation Customisation --> optional ! . Problems and Solutions . Credits . Updates . some Info you need to know that with Mavericks we need to make some customisation for every hardware spesfication . our notebook have some customisation on cpu , graphics and wireless card . so when you going to setup you must to know your cpu name to choose your SSDT-4.aml this table show to osx the power states that this cpu works with it . you need also to use the correct DSDT.aml and SMBIOS this is determined by the presence of nvidia card or not . if you are looking for using WIFI on osx the only working card is dell Wireless 1702 card . you need to do bios mod it is a must . Bios Mod You can find here bios mod LINK you will find tool to apply bios and bios mod . close all programs open tool choose bios file press flash wait till finish close program shutdown the notebook .. you done this bios mod contain updated microcode , updated intel vbios with support for vesa mode & patched power management module . Pre Install for Pre Install you will need Mavericks 10.9 GM dmg . Pre Install Folder LINK . Usb Flash Memory 8 GB or more . watching this Video . now you ready for installation without any panic or any problem start setuping 5 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 i reuploaded updater if any one download it remove and download new one if there is problem or notice about the updated guide please write it thanks Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 What should I do if I have 10.9 DP8 and i don't want clean install ? it is better to do new clean install do back up then do install ---- i don't know about setuping it on top of old install idont like it even if it works ! Link to comment Share on other sites More sharing options...
SYoung Posted October 7, 2013 Share Posted October 7, 2013 My model has an AMD Radeon HD 6470M graphics card instead of a Nvidia card. Is there a separate DSDT for this configuration, or should I use one of the DSDT's from the pre install package? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 My model has an AMD Radeon HD 6470M graphics card instead of a Nvidia card. Is there a separate DSDT for this configuration, or should I use one of the DSDT's from the pre install package? try the one have nvidia and tell me the result if failed try have no nvidia if failed then you will need new dsdt Link to comment Share on other sites More sharing options...
Nemosucker Posted October 7, 2013 Share Posted October 7, 2013 Guide update to 10.9 is Done <3 This Topic is started since " 4 Nov 2011 " and still like a new one, What we should to do with u <3 I just wanna to say Thanks many times for u and every one who has add fix's or solved an issue or anything else to helping us. Thnx once again " Mohamed Khairy " Link to comment Share on other sites More sharing options...
Kashmir72 Posted October 7, 2013 Share Posted October 7, 2013 Thanks Mohamed...U did great things again... Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 <3 This Topic is started since " 4 Nov 2011 " and still like a new one, What we should to do with u <3 I just wanna to say Thanks many times for u and every one who has add fix's or solved an issue or anything else to helping us. Thnx once again " Mohamed Khairy " Thanks Mohamed...U did great things again... thanks hope that i make it easy for you to success on transforming your notebook to MacBook Pro 8.x 1 Link to comment Share on other sites More sharing options...
rob1980 Posted October 7, 2013 Share Posted October 7, 2013 Mohamed Khairy Thanks for taking the time to prepare another video guide for mavericks. I have a couple of questions to ask Does the latest guide include the latest USB 3.0 kexts, black screen DSDT fixes, trackpad fix with 2 finger gestures etc? Looking forward to starting over again on my friends dell Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 Mohamed Khairy Thanks for taking the time to prepare another video guide for mavericks. I have a couple of questions to ask Does the latest guide include the latest USB 3.0 kexts, black screen DSDT fixes, trackpad fix with 2 finger gestures etc? Looking forward to starting over again on my friends dell the kexts is all the latest one about dsdt for people don't having nvidia card not tested yet but supposed to work ! you can test Link to comment Share on other sites More sharing options...
SYoung Posted October 7, 2013 Share Posted October 7, 2013 try the one have nvidia and tell me the result if failed try have no nvidia if failed then you will need new dsdt I tried both and I noticed that with both DSDT's, HDMI doesn't work after installing the AppleIntelSNBGraphicsFB.kext. HDMI did work before I replaced the original one with the one from the post install package. Everything else seems to work fine. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 I tried both and I noticed that with both DSDT's, HDMI doesn't work after installing the AppleIntelSNBGraphicsFB.kext. HDMI did work before I replaced the original one with the one from the post install package. Everything else seems to work fine. i patched the kext for VGA and laptop screen only my hdmi port with nvidia is use less try this kext and tell me if hdmi works or not ! AppleIntelSNBGraphicsFB.kext.zip also about dsdt when you use have nvidia dsdt do you see two cards or one card on system report ? Link to comment Share on other sites More sharing options...
SYoung Posted October 7, 2013 Share Posted October 7, 2013 i patched the kext for VGA and laptop screen only my hdmi port with nvidia is use less try this kext and tell me if hdmi works or not ! AppleIntelSNBGraphicsFB.kext.zip also about dsdt when you use have nvidia dsdt do you see two cards or one card on system report ? HDMI does not work with this kext and only the Intel HD-video 3000 card shows up in the system report with the nvidia dsdt Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 HDMI does not work with this kext and only the Intel HD-video 3000 card shows up in the system report with the nvidia dsdt ok try this one AppleIntelSNBGraphicsFB.kext.zip Link to comment Share on other sites More sharing options...
SYoung Posted October 7, 2013 Share Posted October 7, 2013 ok try this one AppleIntelSNBGraphicsFB.kext.zip This one works! Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 This one works! ok try also VGA with it if you can and will post for you dsdt for hdmi audio now DSDT.aml.zip with this dsdt and above kext your AMD card is disabled hdmi with audio works + VGA cable also works if one of the above doesn't work tell me Link to comment Share on other sites More sharing options...
rob1980 Posted October 7, 2013 Share Posted October 7, 2013 the kexts is all the latest one about dsdt for people don't having nvidia card not tested yet but supposed to work ! you can test if you havent found out before, ill test when i have my friends laptop, i use a probook, i know his works on dsdt patch in 10.8.4.. Thanks again Link to comment Share on other sites More sharing options...
SYoung Posted October 7, 2013 Share Posted October 7, 2013 ok try also VGA with it if you can and will post for you dsdt for hdmi audio now DSDT.aml.zip with this dsdt and above kext your AMD card is disabled hdmi with audio works + VGA cable also works if one of the above doesn't work tell me hdmi display and vga works, but hdmi audio doesn't Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 7, 2013 Author Share Posted October 7, 2013 if you havent found out before, ill test when i have my friends laptop, i use a probook, i know his works on dsdt patch in 10.8.4.. Thanks again ok waiting your confirmation hdmi display and vga works, but hdmi audio doesn't can you provide ioregistry ? Link to comment Share on other sites More sharing options...
SYoung Posted October 8, 2013 Share Posted October 8, 2013 can you provide ioregistry ? Here it is ioreg.txt Link to comment Share on other sites More sharing options...
rob1980 Posted October 8, 2013 Share Posted October 8, 2013 I would be very interested in HDMI audio too, I failed to get it to work with DSDT patch in 10.8.4 after fixing black screen error, probably needed adjusting to suit the inspiron.. This guide is getting very close to be near perfect, just a couple more DSDT patches to get tested Well Done Mohamed and others who have helped along the way I do have one important question to ask.. My friends still suffers with bad artefacts.. What fixes / version of FakeSMC are you using to resolve this these days? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 8, 2013 Author Share Posted October 8, 2013 Here it is it is better to me to save it with ioregistryexplorer thanks I would be very interested in HDMI audio too, I failed to get it to work with DSDT patch in 10.8.4 after fixing black screen error, probably needed adjusting to suit the inspiron.. This guide is getting very close to be near perfect, just a couple more DSDT patches to get tested Well Done Mohamed and others who have helped along the way I do have one important question to ask.. My friends still suffers with bad artefacts.. What fixes / version of FakeSMC are you using to resolve this these days? the problem that i can't test hdmi as my hdmi port isn't connected to the intel card so can do any thing for this port will make small try on it as i am very busy having final exams soooooon about artifacts i don't have this problem also i posted on problem link for begin of discussion about the problem read it may you get solution Link to comment Share on other sites More sharing options...
vanquybn Posted October 9, 2013 Share Posted October 9, 2013 I have just updated to 10.9 using kext on the post#1, however the vga does not work for me , please help. Thanks Link to comment Share on other sites More sharing options...
vanquybn Posted October 9, 2013 Share Posted October 9, 2013 here are my ioreg dell2670qm_ioreg.txt Link to comment Share on other sites More sharing options...
tosbaha2k Posted October 9, 2013 Share Posted October 9, 2013 Hi, today I have upgraded to 10.9 but I have a problem about boot loader. After install boot loader was working but if I select MAC partition it justs reboots. However if I try to boot with USB install disk of 10.9 and select MAC partition I can boot the Mavericks. But I have another weird thing I can't see MAC partition in my computer. It doesn't list. What could be wrong? Link to comment Share on other sites More sharing options...
Recommended Posts