Mohamed Khairy Posted April 27, 2012 Author Share Posted April 27, 2012 i mean to repartion your HDD using disk utility to MBR the important data copy them to external HDD or others and see Link to comment Share on other sites More sharing options...
Madamido Posted April 27, 2012 Share Posted April 27, 2012 Doesn't seem to be a good solution for me, each time I install mac, I will have to do this that way.... Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted April 27, 2012 Author Share Posted April 27, 2012 this will be the first and last time to do that !! Link to comment Share on other sites More sharing options...
Madamido Posted April 27, 2012 Share Posted April 27, 2012 Partitioned the hole hard drive with Master Boot Record at 1 partition only formatted with Mac OS X Journaled and installed to it. After installation completed, booted into USB and choosed the drive I installed to with "-x -v" and the exact same problem happens! Seems like I formatted it for nothing :wallbash: Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted April 27, 2012 Author Share Posted April 27, 2012 Partitioned the hole hard drive with Master Boot Record at 1 partition only formatted with Mac OS X Journaled and installed to it. After installation completed, booted into USB and choosed the drive I installed to with "-x -v" and the exact same problem happens! Seems like I formatted it for nothing :wallbash: strange is installation is competed successfully ? the problem of still waiting for root means that mac cant read the partion contain mac means that the kext for sata controller not loaded or not compatible but our sata controller works defaultly on achi mode on mac means that sata kext not loaded or corruptted !! ------------------------------------------------------------ some tries to do !! 1- load all kexts using this flag UseKernelCache=No -f -v respect captial and small 2- open installer and open from it terminal and there is import option you can browse mac partion go to system / library / extensions and check for appleahciport.kext ioahcifamily.kext 3- may be the lion you downloaded is corrupted !! this is my thoughts now about your problem do try if fail go for next try Link to comment Share on other sites More sharing options...
Madamido Posted April 27, 2012 Share Posted April 27, 2012 Tried "UseKernelCache=No -f -v" with same problem Both kexts are there and installed filename: h-ml1073.dmg md5: 18542A8A1A16657257BA0B5263F5B044 sha-1: 8EF208772F878698E9DD92B3632E25B23FFC9CA7 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted April 27, 2012 Author Share Posted April 27, 2012 will check it to me i downloaded it from torrentleech and after extract MD5 checker says 18542A8A1A16657257BA0B5263F5B044 as one you posted did you checked one you have or you copied md5 from download site ? Link to comment Share on other sites More sharing options...
Madamido Posted April 27, 2012 Share Posted April 27, 2012 I checked the one I downloaded with HashTab edit: I will use a VMware image to prepare the USB again and will give it another try as I can't install iAtkos now on the laptop Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted April 27, 2012 Author Share Posted April 27, 2012 ok if the problem still tell me Link to comment Share on other sites More sharing options...
Madamido Posted April 28, 2012 Share Posted April 28, 2012 Can I use an image of leopard (10.5.5) to prepare the USB or I must get a vmware image of 10.6 or above? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted April 28, 2012 Author Share Posted April 28, 2012 no problem if you can Link to comment Share on other sites More sharing options...
Madamido Posted April 28, 2012 Share Posted April 28, 2012 asl el tutorial maktob feh 10.6 or above wana mala2etsh 3'er 10.5.5 torrent 7elw we 2 gega bas Link to comment Share on other sites More sharing options...
Madamido Posted April 29, 2012 Share Posted April 29, 2012 Leopard didn't work, chimera installer hanged while installing it to the USB flash and it seems because I must use Snow Leopard Downloaded Snow Leopard 10.6.5 vmware image and will try tonight! Link to comment Share on other sites More sharing options...
kedzo Posted April 29, 2012 Share Posted April 29, 2012 Hi, I have successfully installed Lion on my Dell Inspiron N5110, and everything works great, except keyboard. No matter what i do, i can't get vertical line. I have added newest kext, and selected ISO European, but still not working. Can somebody help me with this problem? Thanks Link to comment Share on other sites More sharing options...
Madamido Posted April 30, 2012 Share Posted April 30, 2012 Prepared the usb from 10.6.5 vmware image and I got the same problem Used "UseKernelCache=No -f -v" and got the same problem The kexts you mentioned are in the mac partition as I checked with the import of terminal And the md5 matches so I don't know what is the problem So far I have formatted the whole hard disk and downloaded like 7 gegas for nothing, no result at all and as well as not being able to use iAtkos anymore as I can't revert to bios A07 and it doesn't work with A09 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted April 30, 2012 Author Share Posted April 30, 2012 Hi, I have successfully installed Lion on my Dell Inspiron N5110, and everything works great, except keyboard. No matter what i do, i can't get vertical line. I have added newest kext, and selected ISO European, but still not working. Can somebody help me with this problem? Thanks dont understand you is all keyboard dont work or one key doesnt work !! Prepared the usb from 10.6.5 vmware image and I got the same problem Used "UseKernelCache=No -f -v" and got the same problem The kexts you mentioned are in the mac partition as I checked with the import of terminal And the md5 matches so I don't know what is the problem So far I have formatted the whole hard disk and downloaded like 7 gegas for nothing, no result at all and as well as not being able to use iAtkos anymore as I can't revert to bios A07 and it doesn't work with A09 see your PM Link to comment Share on other sites More sharing options...
kedzo Posted May 1, 2012 Share Posted May 1, 2012 keyboard is working, but when i type vertical line, it writes this ~ sign. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted May 1, 2012 Author Share Posted May 1, 2012 keyboard is working, but when i type vertical line, it writes this ~ sign. is `~ beside enter on your keyboard or where ? Link to comment Share on other sites More sharing options...
TUX FIRE Posted May 1, 2012 Share Posted May 1, 2012 Hello Mr Khairy, i thank you so much for your Guide, So all works for me except some stuffs like Wifi cuz i have the heated BCM4313 with a strange PID & VID, something like 14e4-4727 and HDMI. Anyway, i have some remarks : 1- About the backlight, the first thing it becomes much powerful after wake (same remark that Lucky luck), the Pc believes it is on battery, the second thing, when you are on AC and u do nothing, the screen darkens quickly after 1 or 2 minutes, but this option is only when Pc is on Battery. 2- Now my Pc is on AC adapter (i removed the battery), i want to update software & it displayed to me a message like what my Pc isn't on AC !! (see the attachment) Any My English Sucks Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted May 1, 2012 Author Share Posted May 1, 2012 your notebook is not our notebook so you didn't used used my dsdt you need to patch your dsdt anther thing why you remove your battery !!! when opening mac from restart or shutdown the highest brightness is lower than must be after sleep or screen sleep this is corrected this isn't a big problem to searh on it now about photo you posted idont understand it can you post your untouched dsdt table extract it from aida64 Link to comment Share on other sites More sharing options...
kedzo Posted May 1, 2012 Share Posted May 1, 2012 the `~ is beside 1 and above tab, and \| is above enter on my keyboard Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted May 1, 2012 Author Share Posted May 1, 2012 the `~ is beside 1 and above tab, and \| is above enter on my keyboard not use voodoops2keyboard from update use it from post install or preinstall folder you will find it under voodoops2controller /contents /plugins Link to comment Share on other sites More sharing options...
kedzo Posted May 1, 2012 Share Posted May 1, 2012 Thanks Link to comment Share on other sites More sharing options...
TUX FIRE Posted May 1, 2012 Share Posted May 1, 2012 your notebook is not our notebook so you didn't used used my dsdt you need to patch your dsdt anther thing why you remove your battery !!! when opening mac from restart or shutdown the highest brightness is lower than must be after sleep or screen sleep this is corrected this isn't a big problem to searh on it now about photo you posted idont understand it can you post your untouched dsdt table extract it from aida64 No worry, i use my own DSDT, i got it from DSDTSE, i patch it using somes patches for Sandybridge (comes with DSDT Editor), but for the brightness i have the opposite thing, when a open the mac from restart, i have a level of brightness much higher than must be :S in the attachment, the DSDT without patch and the DSDT patched that i use now. And Yes our Notebook are different but are from the same family , your VoodooHDA, AppleIntelCPUPowermanagement, AppleIntelSNB, & more kexts work fin for me !!! DSDTnative.dsl.zip DSDT Patched.aml.zip Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted May 1, 2012 Author Share Posted May 1, 2012 here is simple patched dsdt try it and you nearly can use applehda on topic if your codec id is 111D:76D1 DSDT.aml.zip Link to comment Share on other sites More sharing options...
Recommended Posts