Asus G53 Snow lepoard install

[stlouis1]

I'm going to apologize in advance as this may be a long post. but here it is

 

last week I got an Asus G53SW, i'm determined to get it running OSX as that's what I bought it for. why this one over other laptop? the simple answer is 1080p screen resolution, its tough to find in laptops these days, and i do need the real estate for my applications

 

i'm going to try to detail as much as i can without losing sight of the main point. i don't have everything working yet as i'm still missing a few things. so i am asking for some help to a degree while i offer information on what has worked thus far

 

SPECS (pulled from the asus page)

 

Intel® Core™ i7 2630QM Processor

Chipset Intel® HM65 Express Chipset

Memory DDR3 1333 MHz SDRAM, 4

Display 16'' 16:9 Full HD (1920x1080) LED Backlight

Graphic NVIDIA® GeForce® GTX 460M 1.5GB GDDR5 VRAM

 

Storage

Optical Drive

Card Reader 5 -in-1 card reader ( SDXC/ MS/ MS Pro/ MS Duo/ MMC)

Camera 2.0 Mega Pixel Fixed web camera

Networking Integrated 802.11 b/g/n

Built-in Bluetooth™ V2.1+EDR (Optional)

10/100/1000 Base T

 

Interface

1 x Microphone-in jack

1 x Headphone-out jack

1 x USB 3.0 port(s)

3 x USB 2.0 port(s)

1 x RJ45 LAN Jack for LAN insert

1 x HDMI

Audio Built-in Speakers And Microphone

Battery 8Cells : 5200 mAh 74 Whrs

 

 

I've also bumped the ram up to 8gb, and put in a 60gb OCZ Agility 3 SSD

 

Getting started

 

I used the latest [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with the following command switches to start the setup from a 10.6.3 disc

 

-v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1

 

I do have problems running 10.6.3 whether starting the setup from the CD, or running the installation on the hard drive afterwards. It seems to just lock up at random everytime I reboot. To work around, i have to remove the battery, and AC adapter, and then hold the power button for about a minute, and start over.

 

it took me 5-7 tries to get it installed, and then another 5-7 to boot that installation.

 

 

 

 

After the installation finishes, i run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] again to startup from the hard drive using the same command switches

 

-v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1

 

 

 

 

Update

 

once i get it installed. I updated using the 10.6.7 combo update. i've found that the 10.6.8 update segfaults, whether i use the web update, or offline combo update. 10.6.7 seems to be the highest this one goes

 

After the update is finished, i can start the system using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], but no command switches needed now, just select the OSX install on the drive, and let it run normal

 

Patches

 

Once running 10.6.7 i install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] that i grabbed on the tonymac site

 

I haven't been able to get a boot loader working right, i'm probably an idiot, so this is one item still on my todo list

 

From [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] i do install the Kext Helper and showall files app

 

 

 

 

Once Kext Helper is installed, i toss in the below kexts

 

-AR9285 kext found at the link below, not entirely tested, but it sees wireless networks

 

http://www.kexts.com/downloads.php?do=file&id=1279

 

- voodoo battery kext

 

http://www.kexts.com/downloads.php?do=file&id=192

 

 

 

 

DSDT Auto-Patcher works as well. unfortunately i don't quite get what to do with the DSDT file, from what i gather i probably need a working bootloader for this to do anything?

 

 

 

 

I also have yet to get my display to run at full resolution, it seems to see the card as a GTX 460m, but my screen its running at 1024x768, could use a hand fixing this

 

 

 

 

I also have garbled sound, i've found steps for this, haven't tried it though. i'm not too concerned about the internal audio as ill be using external interfaces anyway. though it would be nice to have the internal working for recording purposes

 

 

 

 

so right now, i need help with the boot loader, and display, if anyone has anything?

[stlouis1]

well, ive managed to get a boot loader installed using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] that i got on the tony mac forum

 

so thats one item down

 

 

 

 

now i can't seem to get it to use the GTX 460m. it did recognize it before as a GTX460 and the ram on it, but not now. and i still can't get the screen resolution to go right

 

i also still have issues with the sound

[respectfull]

well, ive managed to get a boot loader installed using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] that i got on the tony mac forum

 

so thats one item down

 

 

 

 

now i can't seem to get it to use the GTX 460m. it did recognize it before as a GTX460 and the ram on it, but not now. and i still can't get the screen resolution to go right

 

i also still have issues with the sound

 

Hi,

I got myself a G53SW too. Although I'm not properly answering your post, I suggest you install 10.7. you'll get native support for Sandybride and GTX460.

To do so, just follow MaLd0n's guide (lion installation via USB). it's pretty straight forward.

For post installation, network is solved with lnx2mac, sound with VoodooHDA 2.7.2, and GPU is native by using GraphicsEnabler=Yes (if you want OpenCL, check out Netkas's instrutions ).

I haven't manage to get running neither webcam nor USB3,though.

Hope i've helped you

[stlouis1]

Hi,

I got myself a G53SW too. Although I'm not properly answering your post, I suggest you install 10.7. you'll get native support for Sandybride and GTX460.

To do so, just follow MaLd0n's guide (lion installation via USB). it's pretty straight forward.

For post installation, network is solved with lnx2mac, sound with VoodooHDA 2.7.2, and GPU is native by using GraphicsEnabler=Yes (if you want OpenCL, check out Netkas's instrutions ).

I haven't manage to get running neither webcam nor USB3,though.

Hope i've helped you

 

I have been considering 10.7, the only thing i'm worried about is program compatibility with Traktor, Deckadance, Ableton, and then there's Jackaudio that i use for re-routing in's and out's

 

 

I managed to get the 10.6.8 update to install last night without segfaulting, but now it doesn't boot anymore. so i'm beyond teh display and crackled sound problems again.

 

maybe i'll take a stab at 10.7 if you say the display works natively

 

i really would like to be able to run an output from my mixer to the mic jack for recording if it will work. it would save me running a cable to my machine in the other room since windows realy can't do audio, my last recording was pooched because of it

[respectfull]

I have been considering 10.7, the only thing i'm worried about is program compatibility with Traktor, Deckadance, Ableton, and then there's Jackaudio that i use for re-routing in's and out's

 

 

I managed to get the 10.6.8 update to install last night without segfaulting, but now it doesn't boot anymore. so i'm beyond teh display and crackled sound problems again.

 

maybe i'll take a stab at 10.7 if you say the display works natively

 

i really would like to be able to run an output from my mixer to the mic jack for recording if it will work. it would save me running a cable to my machine in the other room since windows realy can't do audio, my last recording was pooched because of it

 

You're right. As far as I checked, Ableton Live is NOT working on Lion. Actually, they're working on a fix and it's in the Beta phase.

If you're willing to use your notebook for audio (like myself) I suggest you get it running in 64bit (for full advantage of your 8Gb).

Right now, I have Logic 9.1.4 with Apogee One interface, and plugged the HDMI way to 32'' screen so it's brilliant!

good luck

BTW, i7 2630QM busratio is 20 not 4 and if PCIRootUID=1 won't run, try 0.

[stlouis1]

You're right. As far as I checked, Ableton Live is NOT working on Lion. Actually, they're working on a fix and it's in the Beta phase.

If you're willing to use your notebook for audio (like myself) I suggest you get it running in 64bit (for full advantage of your 8Gb).

Right now, I have Logic 9.1.4 with Apogee One interface, and plugged the HDMI way to 32'' screen so it's brilliant!

good luck

BTW, i7 2630QM busratio is 20 not 4 and if PCIRootUID=1 won't run, try 0.

so Ableton is a no go on Lion for now? that one i can live without until an update is available since i only use it for a couple filters and some effects. what i need most is Traktor or Deckadance.

 

i'm pulling the latest dev build i could find right now, its crawling, but i should be set to get started with it tomorrow when i get home from work. At least that way i can start testing and see what works and what doesn't before its offically released

 

 

as long as my sound cards and mixer are as plug and play with lion as they are with snow leopard, i'm sure i'll be ok.

 

edit// just did some quick searching, and from recent posts on the NI boards, it seems traktor should work fine.

[stlouis1]

I've been strugling for over a week to get the right combination to work on this new Asus G53Sw laptop. now its almost perfect with SL 10.6.7

 

i've got lan, wifi, display, and usb3 working 100%

 

the only problem other than it only shows 4gb of ram even though it recognizes two 4gb sticks in the about this mac, is the audio crackles

 

it works, but it crackles. i saw something somewhere about replacing the voodoohda in the preboot.dmg that i copied from the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] disc to the extra folder, but i have no idea how to do that.

 

do we have a guide somewhere on here, that a newb like myself can follow? or can someone point me in the right direction?

 

i'd really like to be able to use the mic jack for recording if i can, if not though, at least if there was a way to disable the audio entirely? like blacklisting modules in linux?

[bsides]

Hi guys Im also interessed.in trying to run Lion in this notebook. Mine is identical in specs, except its a NVIDIA 560 gtx 2gb videocard Asus G53SX). I already installed Snow Leopard 10.6.7 but its barely good. I only installed it so I could do a working Lion ISO. Could you please tell me what you did to make this work? i dont have a pendrive to make mald0ns giide unfortunatelly.

 

Thanks in advance!

[jamezelle]

Hi guys Im also interessed.in trying to run Lion in this notebook. Mine is identical in specs, except its a NVIDIA 560 gtx 2gb videocard Asus G53SX). I already installed Snow Leopard 10.6.7 but its barely good. I only installed it so I could do a working Lion ISO. Could you please tell me what you did to make this work? i dont have a pendrive to make mald0ns giide unfortunatelly.

 

Thanks in advance!

 

Check this tutorial http://www.tonymacx86.com/viewtopic.php?f=...90&start=30 , its for G73SW but should work for you, ignore the gtx 460 steps and for enabling the 560m check out this thread http://www.insanelymac.com/forum/index.php?showtopic=260074

 

I hope that helps you out some.

[bsides]

Hey guys,

 

I have successfully installed Lion 10.7.0 and combo updated to 10.7.2 here in my G53SX. My specs are almost identical except: the video card is 560m gtx 2gb, display is 15" and I have 8GB RAM.

 

1. Create the install via Mald0n guide USB (in fact I recorded a DVD instead of a thumb drive since I don't have one big enough). Yeah, you'll have to be at Snow Leopard for that.

2. The installation was just fine but the install itself didnt have USB support (but mouse and keyboard from the notebook worked). I even let Snow Leopard in other partition just in case. It took around 40 minutes to install.

3. After the install and still using the boot cd, my keyboard was dead and no USB so I couldnt get pass a screen with Apple asking for a keyboard to be plugged in... so I had to do one tweak. Boot with -s (single user), mount the stuff as the screen says (/sbin/fsck -fy and /sbin/mount -wr / or something like this) and typed

sudo vim /System/Library/CoreServices/Setup\ Assistant.app/Contents/Info.plist

It will open this file to edit. VIM is terrible for begginners but scroll with your arrow keys until you find the line with "DeviceSection" and type

:d

to delete this line. The same for the line with "Keyboard Type Section". Then type :x to save and exit vim.

4. Just install the kext NullCPUPowerManagement.kext because if not you'll have kernel panic. I installed mine through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] for Lion.

5. I also installed VoodooPS2 to make my keyboard from the notebook working again and USB3 kext from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].

6. Boot thru hd to see if it's working... by now you should have a clean boot (boot with -v just in case).

7. There are several things DSDT I can't explain right now. But you can have my DSDT.AML (it's under work!).

8. If you want to install 10.7.2 do so and then get mine AppleCPUPowerManagement kext which is already patched with Speedstep then you can delete the kext NullCPUPowerManagement altogether.

 

I'm still with no audio as VooodooHDA just panics my kernel everytime. I'm working on it and Bluetooth support.

 

Hope it helps someone else too

dsdt.aml.zip

AppleIntelCPUPowerManagement.kext.zip

[Hugo_bee]

Agree

Busratio is 20

Asap i'll post my exp

[Hugo_bee]

tested the 5 dsdt of the other thred G73-G74 and this dsdt in prev post..

 

confirm acpi Table are the same even if the display is different

few differences.. ok.. but the position.. structure.. name are the same

 

the dsdt above has a GUID method that the other dsdt doesn't have

 

I merged as best the g73 datas into this

[jamezelle]

Anyone manage to get screen brightness control working yet?

[bsides]

tested the 5 dsdt of the other thred G73-G74 and this dsdt in prev post..

 

confirm acpi Table are the same even if the display is different

few differences.. ok.. but the position.. structure.. name are the same

 

the dsdt above has a GUID method that the other dsdt doesn't have

 

I merged as best the g73 datas into this

What is your conclusion?

[Hugo_bee]

What is your conclusion?

 

oh sorry I used the wrong term.. not tested.. but elaborated. becaue the laptop is not yet arrived.. but i'm preparing to manage it

I read those dsdt.. in order to take best from those and produce a unique and also good one

but before testing it.. I like to do my part of work for you

 

bye

[bsides]

oh sorry I used the wrong term.. not tested.. but elaborated. becaue the laptop is not yet arrived.. but i'm preparing to manage it

I read those dsdt.. in order to take best from those and produce a unique and also good one

but before testing it.. I like to do my part of work for you

 

bye

Thank you! And what is the exact version of the notebook for this dsdt? In my case, mine is a g53sx, probably known as a1 in US (in my sig below).

[Hugo_bee]

indeed

is the exact model I bought (as your)

[Hugo_bee]

Laptop arrived!!!!

This eve start to test lion

[Hugo_bee]

i did more tests.. more mods.. I've opened my LION Thread

 

here

 

http://www.insanelymac.com/forum/index.php?showtopic=273046

[Bayonetta]

i have PCI configuration begin problem.can you help me?