nmano Posted March 17, 2012 Author Share Posted March 17, 2012 KEXTS LOADED: Geforce; NVDAGF100Hal; NVDAResman KEXTS NOT LOADED: AppleIntelHDGraphics; AppleIntelHDGraphicsFB; Natit (but if i boot OS X in verbose mode i see: Natit: found ID 0046) dont worry about intel hd kexts but natit have to lodded. what about screen resoution? Link to comment Share on other sites More sharing options...
giofrida Posted March 17, 2012 Share Posted March 17, 2012 dont worry about intel hd kexts but natit have to lodded. what about screen resoution? Only 1024x768. Tried to boot with flag: "Graphics Mode"="1366x768x32" and "Graphics Mode="1366x768x32@60" but doesn't work. Link to comment Share on other sites More sharing options...
gsa390 Posted March 17, 2012 Share Posted March 17, 2012 can not be a port of Linux drivers for gma5700? maybe a good programmer could do it ... Link to comment Share on other sites More sharing options...
nmano Posted March 17, 2012 Author Share Posted March 17, 2012 Only 1024x768. Tried to boot with flag: "Graphics Mode"="1366x768x32" and "Graphics Mode="1366x768x32@60" but doesn't work. I have HM55 SONY.I thing asus/sony they are blocked your resolution. I was ERase sony windows 7 and install retail windows( only microsoft os ) so boot with usb harddrive fomats internal.this might be help u. Link to comment Share on other sites More sharing options...
giofrida Posted March 18, 2012 Share Posted March 18, 2012 So i have an HM55 from HP. And i haven't the original Windows 7 with HP. I installed, after Lion installation, Windows 7 Ultimate. With the Lion Installation, i formatted all the HDD and then, i created two partition: one for Lion and another for Windows 7 Ultimate. I don'tunderstand how HM55 blocks my resolution. :huh: Link to comment Share on other sites More sharing options...
leanderK Posted March 18, 2012 Share Posted March 18, 2012 maybe only works with MOUNTAIN lion??? if i understood it right, manor got the sucess with mountain lion, so maybe it only works with mountain lion. Link to comment Share on other sites More sharing options...
lorius89 Posted March 18, 2012 Share Posted March 18, 2012 Manor got the succes with snw lion and mountain. He have a magic pc!! Link to comment Share on other sites More sharing options...
leanderK Posted March 18, 2012 Share Posted March 18, 2012 Manor got the succes with snw lion and mountain. He have a magic pc!! He had, where?? I have read the thread until manor posted it again and only found posts from him with 10.8 Link to comment Share on other sites More sharing options...
gsa390 Posted March 18, 2012 Share Posted March 18, 2012 Can anyone try manor's kext on 10.8?... I would be very very happy if works... Link to comment Share on other sites More sharing options...
leanderK Posted March 18, 2012 Share Posted March 18, 2012 I don`t have 10.8 Link to comment Share on other sites More sharing options...
leanderK Posted March 18, 2012 Share Posted March 18, 2012 since nobody else here has 10.8, maybe manor can try his kexts with 10.6/10.7, so we can see if its our computer´s fault or snow leopard´s/lion´s Link to comment Share on other sites More sharing options...
gsa390 Posted March 18, 2012 Share Posted March 18, 2012 I'm downloading 10.8 dp2... maybe I will try it... Link to comment Share on other sites More sharing options...
nmano Posted March 18, 2012 Author Share Posted March 18, 2012 10.7 supported kexts 10.6 supported kexts 10.8 supported kexts 10.7.rar 10.6.rar 10.8.rar 1 Link to comment Share on other sites More sharing options...
leanderK Posted March 18, 2012 Share Posted March 18, 2012 10.7 supported kexts 10.6 supported kexts 10.8 supported kexts I`ll try these later`(its late in germany)...what have you changed/added to get this work under 10.6/10.7 manor?? Have you tested it?? Link to comment Share on other sites More sharing options...
giofrida Posted March 19, 2012 Share Posted March 19, 2012 10.7 supported kexts 10.6 supported kexts 10.8 supported kexts I tried 10.7 Kexts but not working: only a bit of acceleration. I noticed you have the resolution (1366x768x32) in chameleon boot loader. I have instead only the following resolutions: 1024x768x(32,16,8); 800x600x(32,16,8) and 640x480x(32,16,8). Maybe you used an EFI String or something that chameleon reads and then you have the resolution 1366x768x32! Link to comment Share on other sites More sharing options...
leanderK Posted March 19, 2012 Share Posted March 19, 2012 I tried 10.7 Kexts but not working: only a bit of acceleration. I noticed you have the resolution (1366x768x32) in chameleon boot loader. I have instead only the following resolutions: 1024x768x(32,16,8); 800x600x(32,16,8) and 640x480x(32,16,8). Maybe you used an EFI String or something that chameleon reads and then you have the resolution 1366x768x32! i can´t test it since im not at home, but you have options for resolutions??? Thats a huge sucess! You have to add it in the chameleon bootloader...here is for example an tutorial how to change resolutions http://www.osx86.net...der-basics.html look near here: <key>Graphics Mode</key> <string>1680x1050x32</string> Link to comment Share on other sites More sharing options...
giofrida Posted March 20, 2012 Share Posted March 20, 2012 If you go, in Chameleon Bootoloader, to "Video Info" you can see all the resolution supported by your graphic card. I have from 1024x768 to 800x600. Instead, manor, have also the resolution 1366x768. You can view it here: http://www.insanelym...attach_id=96915 It's from manor's topic "fixed no kext load issue". Link to comment Share on other sites More sharing options...
overflow Posted March 21, 2012 Share Posted March 21, 2012 Manor has the 1366x768 in his video BIOS VESA table, thats why he get's native resolution. It doesn't involve any of the 10.6/7/8 kexts. If you don't have the native resolution of your panel in your VESA table, there is currently no way to get native resolution. And there probably never will be... Link to comment Share on other sites More sharing options...
giofrida Posted March 21, 2012 Share Posted March 21, 2012 Manor has the 1366x768 in his video BIOS VESA table, thats why he get's native resolution. It doesn't involve any of the 10.6/7/8 kexts. If you don't have the native resolution of your panel in your VESA table, there is currently no way to get native resolution. And there probably never will be... Yes, but why has he got the native resolution in the VESA table and we no? Maybe an EFI String, a module, a patch for Chameleon because it detect the native resolution not the Mac. However with the new kexts installation i have done a little update: Now in "PCI Cards" tab i can see this: Intel HD Graphics: Name: NVDA,Display-B Type: Display Controller Driver Installed: Yes MSI: No Bus: PCI Slot: Built In Vendor ID: 0x8086 Device ID: 0x0046 Subsystem Vendor ID: 0x103c Subsystem ID: 0x143a ROM Revision: 0x00 Revision ID: 0x0002 Anyway only 1024x768... @Manor: Suggestions? EDIT: NEW UPDATE! Chameleon build 1900 (not yet released): Go HERE and see! Our Intel ID is now supported by Chameleon! 1 Link to comment Share on other sites More sharing options...
trik82 Posted March 22, 2012 Share Posted March 22, 2012 EDIT: NEW UPDATE! Chameleon build 1900 (not yet released): Go HERE and see! Our Intel ID is now supported by Chameleon! i tried building chameleon from svn... GraphicsEnabler now seems to do something and with that i can load original 10.7.3 Intel HD kexts but the screen is completely messed up! 1366x768 graphics mode doesn't work at all, with 1280x800 i can see something but there is plenty of horizontal lines, with 1024x768 the screen is replicated 4 times and everything is scrambled. Link to comment Share on other sites More sharing options...
Shaolay Posted March 22, 2012 Share Posted March 22, 2012 i tried building chameleon from svn... GraphicsEnabler now seems to do something and with that i can load original 10.7.3 Intel HD kexts but the screen is completely messed up! 1366x768 graphics mode doesn't work at all, with 1280x800 i can see something but there is plenty of horizontal lines, with 1024x768 the screen is replicated 4 times and everything is scrambled. would you mind sharing your bootfile? Link to comment Share on other sites More sharing options...
trik82 Posted March 22, 2012 Share Posted March 22, 2012 would you mind sharing your bootfile? Chameleon 2.1svn-r1902 ErmaC branch Link to comment Share on other sites More sharing options...
oki270 Posted March 22, 2012 Share Posted March 22, 2012 Chameleon 2.1svn-r1902 ErmaC branch From a quick inspection - the only difference from trunk version is that ID for IntelHDGraphics is added whose only benefit is to show right name of the card when bootloader is loaded. How did you draw any conclusion that something useful is done for intelhd? oki Link to comment Share on other sites More sharing options...
giofrida Posted March 22, 2012 Share Posted March 22, 2012 So installed Chameleon r1902 + IntelGraphicsEnabler module. Result? The same... Link to comment Share on other sites More sharing options...
trik82 Posted March 22, 2012 Share Posted March 22, 2012 From a quick inspection - the only difference from trunk version is that ID for IntelHDGraphics is added whose only benefit is to show right name of the card when bootloader is loaded. How did you draw any conclusion that something useful is done for intelhd? oki i never said that, i'm not a developer, i don't know what it's changed... but i can see that now intelgraphicshd.kext and intelgraphicshdfb.kext load without kp, so i think that something is happening......... Link to comment Share on other sites More sharing options...
Recommended Posts