Still Win Fan Posted July 2, 2011 Author Share Posted July 2, 2011 Hi! I installed as described (Lion GM) but at first reboot (after installing Chameleon on "Lion" partition) it boots very slow!! it takes like 5 minutes to boot!! I tried to boot in verbose mode and this is what i see (attached image)!! At third reboot it hangs on Waiting for DSMOS....Who can help me?? Besides I wanna know if it's possible to delete the Boot partition.Thanks! Hi, first thanks for this guide. I used it to install DP4 for a week ago and it worked perfect :-) But now I try to use it to install the GM version. But after install I restart and I get a Kernel Panic saying: "No HPETs avaliable...CPU ......) I have changed HPET from 32bit to 64bit in BIOS. And without any change I can boot and run Snow Leopard. I'm typing there now :-) Any ideas? I run a Gigabyte P55M-UD2 motherboard with a i5 750 CPu and an Asus Geforce 9500 Grapicscard I have updated the first post make sure that you did what the instructions says. Link to comment Share on other sites More sharing options...
niclasc Posted July 2, 2011 Share Posted July 2, 2011 Hi, first thanks for this guide. I used it to install DP4 for a week ago and it worked perfect :-) But now I try to use it to install the GM version. But after install I restart and I get a Kernel Panic saying: "No HPETs avaliable...CPU ......) I have changed HPET from 32bit to 64bit in BIOS. And without any change I can boot and run Snow Leopard. I'm typing there now :-) Any ideas? I run a Gigabyte P55M-UD2 motherboard with a i5 750 CPu and an Asus Geforce 9500 Grapicscard Shame on me :-) It turned out that I forgot to copy the files to /Extra I was sure I did that, but apparently not :-( Link to comment Share on other sites More sharing options...
Still Win Fan Posted July 2, 2011 Author Share Posted July 2, 2011 Hi! I installed as described (Lion GM) but at first reboot (after installing Chameleon on "Lion" partition) it boots very slow!! it takes like 5 minutes to boot!! I tried to boot in verbose mode and this is what i see (attached image)!! At third reboot it hangs on Waiting for DSMOS....Who can help me?? Besides I wanna know if it's possible to delete the Boot partition.Thanks! Yes its possible to delete the Boot partition but make sure you have installed chameleon on your lion partition first. Link to comment Share on other sites More sharing options...
Wifi75 Posted July 3, 2011 Share Posted July 3, 2011 Sorry but work without FakeSMC.kext ? Link to comment Share on other sites More sharing options...
azaz Posted July 3, 2011 Share Posted July 3, 2011 I have updated the first post make sure that you did what the instructions says. Yesterday I did it exactly. I tried to reinstall Lion several times and now finally works! I don't know why... However I was not able to get to work the network card and audio. How did you make it work? Besides I have an i7 920 on a P6TSE but in "About This Mac" I see an Intel Xeon processor (and a writing that says Macbook Air). I attached a screenshot... How can I fix this to see something like your "About this mac"? Thanks!! Link to comment Share on other sites More sharing options...
Still Win Fan Posted July 3, 2011 Author Share Posted July 3, 2011 Yesterday I did it exactly. I tried to reinstall Lion several times and now finally works! I don't know why... However I was not able to get to work the network card and audio. How did you make it work? Besides I have an i7 920 on a P6TSE but in "About This Mac" I see an Intel Xeon processor (and a writing that says Macbook Air). I attached a screenshot... How can I fix this to see something like your "About this mac"? Thanks!! To get network and sound working download these two kexts from here http://www.mediafire.com/?n1ocvra31qd74fy. Extract the file then place the two kext in your system->library->Extension folder then run kext utility. And download the right dsdt file from here http://www.insanelymac.com/forum/index.php...p;#entry1468585 Link to comment Share on other sites More sharing options...
azaz Posted July 3, 2011 Share Posted July 3, 2011 To get network and sound working download these two kexts from here http://www.mediafire.com/?n1ocvra31qd74fy.Extract the file then place the two kext in your system->library->Extension folder then run kext utility. And download the right dsdt file from here http://www.insanelymac.com/forum/index.php...p;#entry1468585 Ok for network and sound but nothing good for About this mac... I downloaded the i7 920 DSDT.aml and placed it in /Extra folder and rebooted. After reboot I still see Intel Xeon... Maybe I have to edit smbios.plist.. I don't know... What do you suggest I do? thanks Link to comment Share on other sites More sharing options...
hyperduc Posted July 3, 2011 Share Posted July 3, 2011 Ok for network and sound but nothing good for About this mac... I downloaded the i7 920 DSDT.aml and placed it in /Extra folder and rebooted. After reboot I still see Intel Xeon... Maybe I have to edit smbios.plist.. I don't know... What do you suggest I do? thanks I know this is simple, but you did rename the i7 920 DSDT to just "DSDT.aml" and placed it in extra? Link to comment Share on other sites More sharing options...
Effendi Posted July 3, 2011 Share Posted July 3, 2011 Just wanted to express my gratitude. Lion works like a charm, full video, audio, network. Actually I did not have to put more work into this than in any other SL setup - surprising. Link to comment Share on other sites More sharing options...
azaz Posted July 4, 2011 Share Posted July 4, 2011 I know this is simple, but you did rename the i7 920 DSDT to just "DSDT.aml" and placed it in extra? Yes. Filename is "DSDT.aml" and it is placed in /Extra Any suggestion? Link to comment Share on other sites More sharing options...
pehera Posted July 4, 2011 Share Posted July 4, 2011 Just did it on my Sandy Bridge GA-P67A-UD4-B3 using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.7.2 (Chimera) instead of Chameleon. Everything´s working great. Link to comment Share on other sites More sharing options...
Jaball Posted July 4, 2011 Share Posted July 4, 2011 One fine guide. Try and change graphics enabler setting in Extra/com.apple.Boot.plist to "No" if You get stuck during install (around DSMOS arrived): <key>GraphicsEnabler</key> <string>No</string> For the Asus P6T SE - working perfect (scroll to bottom of page): official Realtek Snow Leopard network driver and I've attached the binpatched and fully working AppleHDA.kext from Lion Golden Master (v2.1.1f11) - the one posted above is from 10.6.x. Copy to S/L/E, repair permissions using Terminal/Disk Util/Kext Wizard and reboot. AppleHDA_LionGM_ALC1200.kext.zip Link to comment Share on other sites More sharing options...
KeNgoaiDao Posted July 4, 2011 Share Posted July 4, 2011 + point Thanks man, awsome.... Link to comment Share on other sites More sharing options...
Guilevv Posted July 4, 2011 Share Posted July 4, 2011 I have a white screen with a spinning rainbow wheel when I reboot my computer and try to install Lion. Is anyone having the same problem? I don't know what's happening. P5KPL-AM Core 2 Duo GeForce 9500GT 4GB 1TB Link to comment Share on other sites More sharing options...
jr2008 Posted July 4, 2011 Share Posted July 4, 2011 ican boot it stack in this line Gives me the same error. Any suggestions? Link to comment Share on other sites More sharing options...
Noam AA Posted July 4, 2011 Share Posted July 4, 2011 thanks you so much! worked smooth and easy! Link to comment Share on other sites More sharing options...
nyolc8 Posted July 4, 2011 Share Posted July 4, 2011 Hi! Just two questions: 1. If I erase my partition where SL was, it's erasing the chameleon from it, right? So after the install, I can't boot lion partition... 2. So how I install Chameleon to it, and how to copy Extra folder and DSDT and other stuff after the install? (Sorry for my english) Link to comment Share on other sites More sharing options...
Still Win Fan Posted July 4, 2011 Author Share Posted July 4, 2011 Gives me the same error. Any suggestions? On your boot partition go to extra->extensions and see if there is a voodooPS2 kext Link to comment Share on other sites More sharing options...
Dannydeman Posted July 4, 2011 Share Posted July 4, 2011 Hi! Just two questions:1. If I erase my partition where SL was, it's erasing the chameleon from it, right? So after the install, I can't boot lion partition... 2. So how I install Chameleon to it, and how to copy Extra folder and DSDT and other stuff after the install? (Sorry for my english) Boot with the install partition you made (I guess), or just use a bootCD. You need to install chameleon from within Lion. Link to comment Share on other sites More sharing options...
Still Win Fan Posted July 4, 2011 Author Share Posted July 4, 2011 Hi! Just two questions:1. If I erase my partition where SL was, it's erasing the chameleon from it, right? So after the install, I can't boot lion partition... 2. So how I install Chameleon to it, and how to copy Extra folder and DSDT and other stuff after the install? (Sorry for my english) That's why you have to install chameleon on both SL and Boot partitions so when you install lion on your SL partition you will still have chameleon on your Boot partition. Link to comment Share on other sites More sharing options...
banhong Posted July 4, 2011 Share Posted July 4, 2011 i follow your guide and successfully with - Asus P7P55D-E - I5 750 - ATI 5770 1GB. - Creative Audigy 2 ZS All is work Lan, Sleep (with enabler), Restart. Thank you. Ps. except boot loader i use Chimera from tonymac Link to comment Share on other sites More sharing options...
e1ement Posted July 4, 2011 Share Posted July 4, 2011 So, today I installed Lion twice on my computer. First time just to test it on an older hard disk and the second time I replaced my Snow Leopard. Yet, there are two issues I get: About My Mac says something about "MacBook Air (original)" which is probably just a cosmetic issue and wake up from sleep doesn't work. Since I have some older Kexts in my Extra/Extensions folder I might try some newer ones to get wake up from sleep working. Besides I have an i7 920 on a P6TSE but in "About This Mac" I see an Intel Xeon processor (and a writing that says Macbook Air). I attached a screenshot... How can I fix this to see something like your "About this mac"?Thanks!! As I posted above, I have the same issue with the "MacBook Air" thing, yet, my Lion tells me the correct CPU. Just google for SMcputype and put the correct lines into your smbios.plist. e1ement //EDIT: The computer justs need a little action (mouse click) so the black screen disappears and it wakes up from sleep. Link to comment Share on other sites More sharing options...
Still Win Fan Posted July 5, 2011 Author Share Posted July 5, 2011 So, today I installed Lion twice on my computer. First time just to test it on an older hard disk and the second time I replaced my Snow Leopard. Yet, there are two issues I get: About My Mac says something about "MacBook Air (original)" which is probably just a cosmetic issue and wake up from sleep doesn't work. Since I have some older Kexts in my Extra/Extensions folder I might try some newer ones to get wake up from sleep working. As I posted above, I have the same issue with the "MacBook Air" thing, yet, my Lion tells me the correct CPU. Just google for SMcputype and put the correct lines into your smbios.plist. e1ement //EDIT: The computer justs need a little action (mouse click) so the black screen disappears and it wakes up from sleep. Great Link to comment Share on other sites More sharing options...
jr2008 Posted July 5, 2011 Share Posted July 5, 2011 On your boot partition go to extra->extensions and see if there is a voodooPS2 kext No. I have only these: ALC8xxHDA.kext y FakeSMC.kext. Link to comment Share on other sites More sharing options...
e1ement Posted July 5, 2011 Share Posted July 5, 2011 No. I have only these: ALC8xxHDA.kext y FakeSMC.kext. http://www.insanelymac.com/forum/index.php?showtopic=256729 Get the matching files from "Post Installation" and put those Kexts to Extra/Extensions. Link to comment Share on other sites More sharing options...
Recommended Posts