Jump to content

[GUIDE] Lion Retail & Snow Leopard 10.6.8 on ASUS P8P67 Deluxe B3

Regi Yassin

By Regi Yassin,
in OSx86 10.6 (Snow Leopard)

 Share
177 posts in this topic

Recommended Posts

qhplar
qhplar
Posted
Posted

Regae,

 

WOW! Works just as advertised. Thank you so much for making this EASY!

 

I'm having one issue, my MAC Steam games won't run. Steam begins to run the program, but the games screen never comes up. Some low rez games seem to work, like braid, but Left for Dead 2 and Portal so far I can't get to load. Seems like graphics issue maybe. I'm running an ATI 6870 card that seems to work fine except for some Steam. Any thoughts?

 

Thanks

Ralph

Link to comment
Share on other sites
Regi Yassin
Regi Yassin
Posted
  • Author
Posted
Hello Regae

 

Thanks a lot for your guide, its simple but also efficient. I manage to install everything following your guide, full graphics accelaration and everything but DVD player wont start. Also programs like geekbench crash before starting too. I use retail dvd install but it never completes, meaning it automatically reboots when the installation its around 80%. I boot with the ragae cd and it boots to osx fine, i use the helpers to do before>update>after without a problem, but sure if the initial install not finishing is the cause that dvd player/geekbench are not working

 

Thanks in advance

 

 

 

ASUS P8P67 rev 3.1

ATI radeon HD 5770 1g

4gb Corsair xmd 1600mhz

ASUS sata drive

320gb sata maxtor HDD

try to use GraphicsEnabler=Yes first, if it works, its ok, but if its not,

try to find out what is your framebuffer, but if you already know, use GraphicsEnabler=Yes AtiConfig=YOURS

 

Regae, you create miracle, my mobo is a Asus P8p67 Evo b3, any idea for kext? Alc8xx crash my pc's. Applehda, no problem, hdaenabler no problem.

[RESOLVED] I've installed kext for 892, my ID is 892...sorry Regae

its ok, my codec is 889, so if you followed my guide, it will different for your audio setup

 

Regae,

 

WOW! Works just as advertised. Thank you so much for making this EASY!

 

I'm having one issue, my MAC Steam games won't run. Steam begins to run the program, but the games screen never comes up. Some low rez games seem to work, like braid, but Left for Dead 2 and Portal so far I can't get to load. Seems like graphics issue maybe. I'm running an ATI 6870 card that seems to work fine except for some Steam. Any thoughts?

 

Thanks

Ralph

 

hhmm,, i have no idea, i never tested with steam, i cant help you with this, sorry, maybe you can try to ask to ^Andy^

Link to comment
Share on other sites
danzakk
danzakk
Posted
Posted
j

do you have deluxe mobo or not? if you are using deluxe mobo, just install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], select alc8xxhda applehda rollback, and hda889enabler, you should get working audio

 

Super. Audio already working. How about e-sata external drive?

Link to comment
Share on other sites
luciuxx63
luciuxx63
Posted
Posted
try to use GraphicsEnabler=Yes first, if it works, its ok, but if its not,

try to find out what is your framebuffer, but if you already know, use GraphicsEnabler=Yes AtiConfig=YOURS

 

 

its ok, my codec is 889, so if you followed my guide, it will different for your audio setup

 

 

 

hhmm,, i have no idea, i never tested with steam, i cant help you with this, sorry, maybe you can try to ask to ^Andy^

 

Regae,

any idea for bluetooth, now?

Tank's

Link to comment
Share on other sites
Regi Yassin
Regi Yassin
Posted
  • Author
Posted
Ok, i follow your tips :wacko:

 

Oke, your call

All ok, Regae, Now even Bluetooth functionally. You Are the best!!

My pleasure luciuxx63

 

Hi regae, unfortunally the installation of SL don't start U.U

 

With SL 10.6.7 DVD:

Waiting for root device

 

With SL 10.6.3 DVD:

foto1nq.th.jpg

 

With SL 10.6.0 DVD:

foto2lh.th.jpg

 

Tips? :blink:

SL 10.6.7? Is it retail?

 

What is your vga?

 

And are you sure your sata setting is set to AHCI mode?

Link to comment
Share on other sites
Vitix
Vitix
Posted
Posted
SL 10.6.7? Is it retail?

 

What is your vga?

 

And are you sure your sata setting is set to AHCI mode?

 

Yes it is the retail

 

My VGA is an ATI 4870

 

SATA is all set to AHCI by default

 

I've tried with -x flah and nothing...

Link to comment
Share on other sites
Vitix
Vitix
Posted
Posted

UPDATE

 

With [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (not legacy):

 

10.6.3 = Black screen

10.6.7 = Starts but says that Snow Leopard can't be installed on this machine...o.O?

 

UPDATE 2

 

With [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (legacy):

 

10.6.3 = Don't Start

10.6.0 = I'm installing

 

UPDATE 3

 

Finally installed but with a lot of problems:

 

To install without "Reset" anytime (little fresh computer :( ) i've used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Legacy, next i reused [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Legacy to start and apply BEFORE 10.6.8 Patch, then i reused [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Legacy and Combo Update go on...next i used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (NL) to apply AFTER patch because with your CD black screen :blink:...after i apply your pack and restart i've got a beutiful Black screen, plug-off and plug-in the monitor cable show me the desktop (strange?). All seems to be work but Realtek LAN doesn't :wacko:

 

UPDATE 4

 

Realtek LAN now works using kext provided by [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.8.0

 

Video stills Black until i plug-off/plug-in the cable U.U

 

Audio icon is grey T.T

Link to comment
Share on other sites
Regi Yassin
Regi Yassin
Posted
  • Author
Posted
UPDATE

 

With [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (not legacy):

 

10.6.3 = Black screen

10.6.7 = Starts but says that Snow Leopard can't be installed on this machine...o.O?

 

UPDATE 2

 

With [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (legacy):

 

10.6.3 = Don't Start

10.6.0 = I'm installing

 

UPDATE 3

 

Finally installed but with a lot of problems:

 

To install without "Reset" anytime (little fresh computer :) ) i've used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Legacy, next i reused [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Legacy to start and apply BEFORE 10.6.8 Patch, then i reused [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Legacy and Combo Update go on...next i used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (NL) to apply AFTER patch because with your CD black screen :(...after i apply your pack and restart i've got a beutiful Black screen, plug-off and plug-in the monitor cable show me the desktop (strange?). All seems to be work but Realtek LAN doesn't :(

 

UPDATE 4

 

Realtek LAN now works using kext provided by [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.8.0

 

Video stills Black until i plug-off/plug-in the cable U.U

 

Audio icon is grey T.T

ypur 10.6.7 is not a retail from apple, its ripped from macbook installer, so it can not be used for hackintosh,

 

i had no idea for your vga card, my experiences is only for 6850 or 6870.

maybe you use GraphicsEnabler=Yes flag, or ask to someone who have the same card as yours

 

for audio, if you are NOT using any DSDT.aml with audio patches, just install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

select rollback applehda, alc8xxhda, and also hdaenabler889, thats it

 

please make sure first if your mobo is alc889 not-a codec,

if your mobo same like me, deluxe version,

 

-ALC8xxHDA

-AppleHDA Rollback

-HDAEnabler889

Link to comment
Share on other sites
Vitix
Vitix
Posted
Posted
ypur 10.6.7 is not a retail from apple, its ripped from macbook installer, so it can not be used for hackintosh,

 

i had no idea for your vga card, my experiences is only for 6850 or 6870.

maybe you use GraphicsEnabler=Yes flag, or ask to someone who have the same card as yours

 

for audio, if you are NOT using any DSDT.aml with audio patches, just install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

select rollback applehda, alc8xxhda, and also hdaenabler889, thats it

 

please make sure first if your mobo is alc889 not-a codec,

if your mobo same like me, deluxe version,

 

-ALC8xxHDA

-AppleHDA Rollback

-HDAEnabler889

 

Whoops :( There is an original retail of 10.6.7?

 

For the VGA i create a TOPIC into TM site...

 

I install your pack as your video with DSDT.aml but doesn't work :(

 

For the moment i suspend this WAR because I'm afraid of ruining the computer resetting constantly

Link to comment
Share on other sites
Regi Yassin
Regi Yassin
Posted
  • Author
Posted
Whoops :D There is an original retail of 10.6.7?

 

For the VGA i create a TOPIC into TM site...

 

I install your pack as your video with DSDT.aml but doesn't work :D

 

For the moment i suspend this WAR because I'm afraid of ruining the computer resetting constantly

no, there is not 10.6.7 retail

 

just make a backup then,

super duper good app, make an image for your backup,

 

are you using mydsdt or not? if not, send me your dsdt

Link to comment
Share on other sites
Vitix
Vitix
Posted
Posted
no, there is not 10.6.7 retail

 

just make a backup then,

super duper good app, make an image for your backup,

 

are you using mydsdt or not? if not, send me your dsdt

 

Ah ok, only 10.6.0 and 10.6.3 :D

 

I use your DSDT installed with your pack 3.0, but now the screen is black U.U

Link to comment
Share on other sites
Regi Yassin
Regi Yassin
Posted
  • Author
Posted
Ah ok, only 10.6.0 and 10.6.3 :)

 

I use your DSDT installed with your pack 3.0, but now the screen is black U.U

ok, try to install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], select what i said before, let me know it works or not

Link to comment
Share on other sites
Regi Yassin
Regi Yassin
Posted
  • Author
Posted
Regae:

 

is possible burn from USB pen, the image of Lion in to dvd? Or install the OSX Lion only da USB?

Tank's (magic Regae) :rolleyes:

Use usb is more easier and fastest way,

Just follow my video guide for lion

 

Use usb if you have one, use dvd with my installer maker if no usb

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...