jcalado Posted January 24, 2008 Share Posted January 24, 2008 Andre_Terabyte have you had any issues regarding the network not working sometimes? Link to comment Share on other sites More sharing options...
joeythefish Posted January 25, 2008 Share Posted January 25, 2008 Please help, I my default wireless card was a Intel 3945 which we don't have drivers for yet so I replaced it with a Dell True Wireless 1490 which has Broadcom 4311 chipset, should work out of the box but Leo gives it the wrong driver in the NetworkInterfaces.plist, see below. <dict> <key>BSD Name</key> <string>en1</string> <key>IOBuiltin</key> <true/> <key>IOInterfaceType</key> <integer>6</integer> <key>IOInterfaceUnit</key> <integer>2</integer> <key>IOMACAddress</key> <data> ABRR3BE5 </data> <key>IOPathMatch</key> <string>IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P3@1C,2/IOPCI2PCIBridge/ethernet@0/AirPort_Athr5424ab/AtherosM35abInterface</string> I don't know what to do now. So I'll take any help. Thanks guys & gals!! Link to comment Share on other sites More sharing options...
macgirl Posted January 25, 2008 Share Posted January 25, 2008 if en1 should be IOInterfaceUnit 1 if en2 then 2 if en3 then 3 if en0 then 0 and so on... Link to comment Share on other sites More sharing options...
joeythefish Posted January 25, 2008 Share Posted January 25, 2008 Thanks for the fast reply, I didn't see that, it was like that cause I was screwing around with the NetworkInterfaces.plist. Anyway, I just reloaded iATKOS and this time I did not select the IONetworkingFamily.kext that is on the install disk. After I rebooted it was going through the question & answer phase and it knew recognized the Dell True Wireless 1490 as a Airport card. So we live and learn do we, I just seem to learn this stuff slower at times. Link to comment Share on other sites More sharing options...
oracle100 Posted January 25, 2008 Share Posted January 25, 2008 Has anybody got the Marvell 8056 flowing at full gigabit speed 1000x, not just at 100x? Mine dies when I force it to run at 1000x speed. Link to comment Share on other sites More sharing options...
shaybc Posted January 26, 2008 Share Posted January 26, 2008 hi, i have returned to the store and gave the "Edimax 7318 USG" another try and it works, all i had to do is d/l RALink drivers for 10.5 and plug it in AFTER the system was up otherwise just plug it out and plug it back in, the RALink utility will auto launch. known issues: slow upload (cant even send mail) and the replugin after boot. hope this helps someone Link to comment Share on other sites More sharing options...
StartFish Posted February 3, 2008 Share Posted February 3, 2008 my intel pro ve dosnt work Link to comment Share on other sites More sharing options...
ergosteur Posted February 4, 2008 Share Posted February 4, 2008 i have a onboard LAN (VIA Rhine II Fast Ethernet) and Mac OS X 10.4.9 doesnt find it...have anybode a good .kext or patch for me? pleeeaaaassssseeeee Via Rhine II/III in 10.4 and 10.5 works for me with pinxue's kext http://www.pinxue.net/mac/viarhine.html Link to comment Share on other sites More sharing options...
sarfa777 Posted February 6, 2008 Share Posted February 6, 2008 I have a Braodcom 57xx in my Dell Optiplex GX280. I did the fix of putting the updated AppleBCM5751Ethernet.kext in the extensions folder and now OSX see's the card and gets and ip address. However my mac address is still all 0's. I follow the instructions to manually define the mac address and when I hit enter, it locks up the pc. So I'm stuck since this pc is behind a switch that requires a mac address to forward to. Link to comment Share on other sites More sharing options...
Nano07 Posted February 10, 2008 Share Posted February 10, 2008 Hi Guys, I just bought a Dlink DWA 547 that is supposed to run out of the box in Leo but can't manage to make it work. Does anyone know how to? I have Kalyway 10.5.1 Installed. THANK YOU!! :-) Link to comment Share on other sites More sharing options...
kay188 Posted February 10, 2008 Share Posted February 10, 2008 Running Kalyway Leopard 10.5.1 Vanilla Kernal installed on installation. Atheros AR5006X worked right away Broadcom 440x Link to comment Share on other sites More sharing options...
gok Posted February 10, 2008 Share Posted February 10, 2008 Vostro 1500 / Kalyway Leopard 10.5.1 Intel Pro Wireless 4965 AGN not working ! Belkin Wireless USB F5D7050 (rev. 3003) work fine with Ralink RT2870 See ya Link to comment Share on other sites More sharing options...
Wayfarer247 Posted February 13, 2008 Share Posted February 13, 2008 Hey, I have a Dell PC running Kalyway's 10.5 install. My network card is Intel® 82566DC Gigabit Platform LAN Connect (Or that is what SIW gave me from windows) and it is not working at all. Internet is the last thing I need to have a complete installation of Leopard, so if anyone has insight, I would be very grateful. Thank you! Link to comment Share on other sites More sharing options...
Sevan Posted February 14, 2008 Share Posted February 14, 2008 By any chance would the Dell 1370 Wireless G or D-Link DWA-130 work with OS X 10.4.8 JaS Intel? Link to comment Share on other sites More sharing options...
burninator04 Posted February 15, 2008 Share Posted February 15, 2008 TP-Link TF3239DL (realtek 8139D Chipset) Works out of the box:) Link to comment Share on other sites More sharing options...
besnack Posted February 19, 2008 Share Posted February 19, 2008 Does any1 know if these USB wlan cards are compatible with osx leopard? Engenius EUB-9702 Wireless N USB Adapter and Engenius EUB-9702 Wireless N USB Adapter. I'm looking and either 1 of these two to buy cause there are no drivers for my wireless card as yet, and they bith support wireless N. thanks. as well as this product here: http://catalog.belkin.com/IWCatProductPage...oduct_Id=372146 Plugs into the expresscard slot on compatible notebooks. Link to comment Share on other sites More sharing options...
macgirl Posted February 20, 2008 Share Posted February 20, 2008 WIKI Link to comment Share on other sites More sharing options...
CompCrasher86 Posted February 24, 2008 Share Posted February 24, 2008 My onboard nVidia MAC Lan 10/100/1000mbps on my MSI K8n Neo works fine but you have to have it disabled in the bios while you do the initial OSX setup. Then you can re-enable it and it works fine. The reason is unknown. Link to comment Share on other sites More sharing options...
terrancew_hod Posted February 27, 2008 Share Posted February 27, 2008 This is a more expensive solution, but I was able to order an Atheros 5008 a/b/g/n mini-pcie card (from ebay) and plug it into my hackintosh by using a PCI Express to Mini-PCIe adapter: http://www.orbitmicro.com/global/pciexpres...pter-p-771.html (I did a google search and there were only two companies offering this adapter and this link has the cheapest) The total cost was about $140, but now I'm able to connect to Apple Airport Extreme 802.11N router at 5ghz. The Atheros card reports as Airport, and no drivers were required to connect it to the adapter. Just make sure you order 3 antennas that work at the 5ghz range (my wireless came with the wires). I live in a area with several wireless networks so I needed to move to a higher band to avoid the interference. I also order the Time Capsule so I will be using it for Time Machine backups with the other macs in the house. This solution is for those that want to have their hackintoshes compatible with the airport extreme at the higher frequency. I don't believe there are any pci/pci express 802.11N adapters that currently go into the 5ghz range, especially compatible with macs. Link to comment Share on other sites More sharing options...
Guignol Posted March 7, 2008 Share Posted March 7, 2008 Yesss sssiirrrr!!!! I am happy with this sucess!!! Acer Aspire 5610 Coreduo 2g ram 2g iatkos .10.5.1 NOTE: 3945ABG not a go! Got myself a 35$ belkin Ver 3 and voila!!!At first,after driver install,it was not working.I need to remove then insert it back! YES sIRRRR!!!!!WOWOOOO!!! i'm so happy I could just {censored} in my pants! eh eh eh!!!! Link to comment Share on other sites More sharing options...
DvP Posted March 12, 2008 Share Posted March 12, 2008 I've got two 8139 Cards (One C, one D)but both dont work. Not recognized in System profiler :-( Link to comment Share on other sites More sharing options...
DaemonES Posted March 12, 2008 Share Posted March 12, 2008 Cause you hands was broken. Link to comment Share on other sites More sharing options...
parker955 Posted March 12, 2008 Share Posted March 12, 2008 Running Kalyway 10.5.1 and the D-Link DWA-542 works great no patching needed and is recognized as being compatible with wireless N. I have another hardwire NIC and it is the Intel 82558 and it also works out of box with no patching needed. My setup is a Dell Dimension 3000. I hope that helps some people out there looking for a new PCI wireless NIC that needs no patching. Link to comment Share on other sites More sharing options...
parker955 Posted March 12, 2008 Share Posted March 12, 2008 Running Kalyway 10.5.1 and the D-Link DWA-542 works great no patching needed and is recognized as being compatible with wireless N. I have another hardwire NIC and it is the Intel 82558 and it also works out of box with no patching needed. My setup is a Dell Dimension 3000. I hope that helps some people out there looking for a new PCI wireless NIC that needs no patching. The DWA-542 is a bit pricey at $90 but I don't mind because this isn't even my computer. Link to comment Share on other sites More sharing options...
freddybaby Posted March 13, 2008 Share Posted March 13, 2008 which driver would I need for this/these... ? anyone? thanks alot. Link to comment Share on other sites More sharing options...
Recommended Posts