Hagar Posted November 28, 2005 Share Posted November 28, 2005 What about sound/graphics? What is your on board ethernet chipset? Link to comment Share on other sites More sharing options...
would_pay_for_mac_on_x86 Posted November 28, 2005 Share Posted November 28, 2005 My intel PRO/1000 PM is working on Intel D955XBK motherboard. My intel PRO/1000 PM is working on Intel D955XBK motherboard. have you tested your in-network file transfer speeds with the gigabit card? supposedly this card can have MTU>1500 maybe 9000 or so... with this on both ends...you might be able to get 700Mbps instead of 200Mbps... if your hard drives are fast enough...lol Link to comment Share on other sites More sharing options...
DSi-Gaming Posted November 29, 2005 Share Posted November 29, 2005 ACCTON EN1207D-TX PCI Card ( with a PXE Boot-Rom Chip onboard ) - Working ( reported as a realtek model ) Link to comment Share on other sites More sharing options...
Litespeed Posted December 1, 2005 Share Posted December 1, 2005 Since the VMWare built-in ethernet drivers do not work, I am wondering if anyone had success using external USB ethernet cards with VMWare? I am not going to do a native install and would like to continue to use VMWare, but lack of network makes it difficult. My other thought was to use the serial ports+ppp to do some kind of loopback remote access to my host OS. Haven't tried that yet, but I really do want to get this up and going. -Robert Have you tried the Maxxus drivers? I found that when using Vmware in bridge mnode, the network adapter in vmware would get an IP address from my DHCP but couldn't go anywhere. But it works fine in NAT mode. Link to comment Share on other sites More sharing options...
MacL0ver Posted December 2, 2005 Share Posted December 2, 2005 WMP54GS - Wireless pci adapter with speedbooster v1.1 - Linksys Link to comment Share on other sites More sharing options...
Mark Roth Posted December 7, 2005 Share Posted December 7, 2005 MacLover, what version of os x86 are you using (10.4.1, 10.4.3 8f1099, or 10.4.3 8f1111). Do you happen to know the chipset of your WMP54GS? Thanks! Mark Link to comment Share on other sites More sharing options...
cyrana Posted December 7, 2005 Share Posted December 7, 2005 Anyone who posts in this thread, please post OS X version and build #, please. Link to comment Share on other sites More sharing options...
brendankoch Posted December 8, 2005 Share Posted December 8, 2005 I have 10.4.3 (8f1111) installed and I have onboard VIA VT6103L 10/100 Ethernet. Under the system profiler it shows up as en0 but it does not show up under system preferences. Any help would be appreciated. Link to comment Share on other sites More sharing options...
PeterFnet Posted December 10, 2005 Share Posted December 10, 2005 I need help with the tulip driver. I try the command "make install" and it says make: command not found. what do i need to do to get it to compile? Any help would be appreciated. If anyone has the tulip.kext already compiled for 10.4.3 and some instructions that would be great too. Hi there. You need to install the developer tools. Go to your isntall dvd. Go to the sub dir > "XCode Tools". Excecute "XcodeTools.mpkg". Your problems will be solved! Link to comment Share on other sites More sharing options...
PeterFnet Posted December 10, 2005 Share Posted December 10, 2005 (edited) I ran "sudo make install", I got all my bibberish. Rebooted, no luck. But I am using a Linksys LNE100TX, this is supposed to be supported. I hope I'm not doing anything wrong! I tried the manual install also, no luck. Also tried the new version from sourceforge. Any ideas? Edited December 11, 2005 by PeterFnet Link to comment Share on other sites More sharing options...
macosx86 Posted December 11, 2005 Share Posted December 11, 2005 Intel Pro/100...works without any setup Link to comment Share on other sites More sharing options...
Celery 2.39ghz w/PB and Firewire Posted December 12, 2005 Share Posted December 12, 2005 This one is for Fuzzlet. . . . I was kinda mad after I installed 10.4.3 on my Thinkpad A31 and the Intel 82557 wouldn't work. Not too mention the upgraded Broadcom wireless, but thats another topic . . . .So I went looking about and saw you had the same frustration. I tried a lot of things, then I went into /Library/Preferences/SystemConfiguration/preferences.plist and took a look to see what was going on. I was going to specify my IP in here cause I thought it wasn't reading what I did in System Preferences, but the IP and all was right. I checked under <key>HTTPEnable</key> <integer>0</integer> <key>HTTPSEnable</key> <integer>0</integer> and saw those zeroes and thought that was weird. Switched them to 1's and here I am the forum. Of course you should save the preferences file to the Desktop then copy to that folder to authenticate and replace the other file, I haven't rebooted but its working. . .. .. . Link to comment Share on other sites More sharing options...
Celery 2.39ghz w/PB and Firewire Posted December 12, 2005 Share Posted December 12, 2005 Ok scratch that last bit, I am an idiot at times, turns out you really want those digits to stay as '0', what does work is this: Go into System Preferences Go to Network Built in Ethernet Then Ethernet Tab Change the Mode to Half duplex 10MBs Click on Apply Now Enjoy Intel 82557 Chip on Thinkpad A31 running 10.4.3 099 build native. Link to comment Share on other sites More sharing options...
zazman Posted December 14, 2005 Share Posted December 14, 2005 I 've found a linksys LNE100TX V5.1 and download the X86 Darwin tulip driver v 1.0.0. the tulip.kext was built in the v1.0.0 so a just had to copy it to extension forlder, change it to 755 and root:wheel and load the kext : works great in osx86 10.4.1 without problem. had somebody tried this NIC with 10.4.3 8f1099 or 8f1111 ? I know the lne100 or lne100tx v2 don't work, but what about v4 and v5 in 10.4.3 ? I've seen a new tulip release v 1.2.0 but you have to compile it, has somebody download it and compile it for 10.4.3 ? Another problem : I tested yesterday the nic but i will have a fast internet connection only next month, so all seems to work as i can configure a tcp or dsl connection, ping works, the hardware address is recognized in network prefs, the network utility shows many things, but : what sort of tests more of a ping could i make (without any connection) in the network utility to confirm my network card as no anomaly (because i can return it to the shop before 15 days....) Thanks Link to comment Share on other sites More sharing options...
ionisys Posted December 25, 2005 Share Posted December 25, 2005 hi there i'm new here wanted to say that i installed osx86 native on my hdd - slave xp on first drive i've got a trust 108 mbps wireless pci card adapter i installed windows vista once 3259 version and i noticed that vista reconized this card as a belkin wireless card!!!! so i thought!!! lets give it a try and do the same within osx86 and yes it does work you need to download these drivers and utility : STA_2500CardBus_2005_09_14 from ralink so i can confirm this card : trust wireless turbo speedshare 108 mbps to work in osx86 with the belkin drivers. Link to comment Share on other sites More sharing options...
wmarsh Posted December 25, 2005 Share Posted December 25, 2005 I ran "sudo make install", I got all my bibberish. Rebooted, no luck. But I am using a Linksys LNE100TX, this is supposed to be supported. I hope I'm not doing anything wrong! I tried the manual install also, no luck. Also tried the new version from sourceforge. Any ideas? Using the XCode tools under 10.4.3 8f1111a I was able to compile the following kext compiled from tulip 1.0.2 However, it will not load due to a failed dependency: com.apple.iokit.IONetworkingFamily Does anyone know how to fulfil this dependency? Edit: Solved it myself, here is how: http://forum.osx86project.org/index.php?sh...st=entry38453 Link to comment Share on other sites More sharing options...
wmarsh Posted December 27, 2005 Share Posted December 27, 2005 All linksys cards do not work . but that is expected, as linksys is a PC only card manufacturer. Looks like I need to shell out on a Realtek card. Does anyone know if there are any Realtek's that support Ubuntu 5.04, windows, and OSX86? Cause networking is essential in Linux . I have Linksys 100tx v4 working beautifully with the Tulip driver. You can get the kext here http://forum.osx86project.org/index.php?showtopic=6115 A complete list of cards working under Linux with the Tulip driver is here. http://pigtail.net/LRP/tulip.html For OS X some may require changing info.plist in tulip.kext Have fun! Link to comment Share on other sites More sharing options...
ecstasy Posted December 29, 2005 Share Posted December 29, 2005 Intel Pro/100...works without any setup Intel Pro/100 S Desktop Adapter from savastore.com works perfectly and as quoted. Now need fix for dissapering ethernet config pane ??? Link to comment Share on other sites More sharing options...
UnderWater Posted January 3, 2006 Share Posted January 3, 2006 SMC 1211TX is a Realtek 8139 Compatible Card, so Mac OS X recognize it as RTL8139 dont working my 10.4.3 Link to comment Share on other sites More sharing options...
xiberia Posted January 14, 2006 Share Posted January 14, 2006 Realtek RTL8139/810x Family Fast Ethernet NIC (built into my Asus p4pex mobo) works fine on a native install of 10.4.3 (Jas patch) Link to comment Share on other sites More sharing options...
msudude Posted January 16, 2006 Share Posted January 16, 2006 My Vitesse VSC8201 Gigabit ethernet on my Epox 9NPA Ultra is not working. This is called Nvidia Nforce Networking Controller in windows and is covered under the forcedeth driver in linux. It would be sweet if this driver were ported to darwin. Apparently there is even a Linux PPC version for it but no darwin version . I will add it to the wiki Link to comment Share on other sites More sharing options...
notsofatjames Posted January 16, 2006 Share Posted January 16, 2006 ive got a belkin card in my desktop. dont quite know which one it is. it doesnt work, but in applications i noticed i had a belkin setup utility installed. i dont remember installing it, so im not sure where that came from. dont know if this helps you guys find a solution Link to comment Share on other sites More sharing options...
crozewski Posted January 18, 2006 Share Posted January 18, 2006 10.4.3 8F1111g IBM X40 Intel 10/100/1000 works out of the box. Link to comment Share on other sites More sharing options...
ploud Posted January 19, 2006 Share Posted January 19, 2006 (edited) IBM 10/100 ethernet server adapter works natively Network Everywhere 10/100 NC100 v2.0 did not work Speed Stream 10/100 SS1020 did not work but showed some sign of green light on server sometimes, who knows? SOHOWARE 10/100 SFA110A did not work Marvell 88E1111 GbE PHY 10/100/1000BASE-T on board DFI lanparty ut nF3 250Gb did not work hope this helps someone I tried to load tulip on terminal but i cant figure out how to access it, it keeps saying file not found. i used my thumb drive to transfer it to the desktop and root file , nothing worked for me, im not familiar with terminal to get around it. my system is using MAC OSX 10.4.3 8 f1111a JaS Patch v4.2b 3000+ amd 64, LANPARTY UT nF3 250Gb, 1 Gig DDR 400 PC3200 300 Gig 16mb cache maxtor drive, NEC DVD RW Logitech wireless keyboard and mouse MX700 6600GT VGA leadtek everything works fine so far except for restart hangs and on board lan did not work floppy did not work either Edited January 27, 2006 by ploud Link to comment Share on other sites More sharing options...
sun69nie Posted January 20, 2006 Share Posted January 20, 2006 Dell OptiPlex GX620 w/10.4.3 8F1111g(JaS) Broadcom BCM5751 A1 on board does NOT work. Intel PRO/100 S Desktop Adapter works FINE natively. Link to comment Share on other sites More sharing options...
Recommended Posts