wheels2040 Posted August 19, 2005 Share Posted August 19, 2005 I have tried the following cards with no success: Cheapo PC Club Card - Realtek RTL8139D 3COM 3C905C-TXM - Broadcom 5904 3COM 3C90B-TX-NM - Lucent Chipset Asanta Tech - DEC 21140-AE I thought the Realtek and the 3COM's would just come up, but they dont. Maybe I am missing something. Link to comment Share on other sites More sharing options...
asdffdsa Posted August 20, 2005 Share Posted August 20, 2005 This sounds great, but I haven't got it working Windows part all worked out, but how do I setup a Null Modem PPP connection in OSX? System Preferences / Network just shows a non-working 'Built in Ethernet', trying to add a ISP connection fails. VMWare works with a serial port / PPP connection. I used a demo of Virtual Serial Port Driver XP v5 to create a pair of serial ports. I bound one of them to Incoming Connections, no flow control, 115200. Allow directly connected users to connect without a password, give it a pair of IP addresses under TCP/IP config. The other serial port I bound to the Virtual Machine. Within OSX select the Null Modem at 115200 as your modem, unselect compression and wait for dial tone. Under PPP Options, select use terminal window. Click Connect. When the terminal window appears, type in CLIENTCLIENT and hit enter (you won't see anything in the window as you type). The XP side should respond with CLIENTSERVER. Click connect. If all goes well you'll be connected via PPP. Link to comment Share on other sites More sharing options...
Guide_Gnu Posted August 20, 2005 Share Posted August 20, 2005 My Marvel Yukon 88E001/8003/8010 doesn't work. And it's the same for my wirless card (Asus 802.11G) Link to comment Share on other sites More sharing options...
opq Posted August 20, 2005 Share Posted August 20, 2005 Marvell 88E8053 PCI-E gigabit ethernet controller DOES NOT WORK... Found on the revised P4C800/P4P800 boards (with the -E suffix). Link to comment Share on other sites More sharing options...
Fuzzlet Posted August 21, 2005 Share Posted August 21, 2005 Intel 82557 10/100 SHOULD work, but I have been unable to in all my efforts. Link to comment Share on other sites More sharing options...
AgentOrange Posted August 21, 2005 Share Posted August 21, 2005 PCI 3Com 3C905C-TXM NIC (Broadcom 5904 chipset) That's what I have, and they are quite common. Also, you may look into something with a "digital" chipset. I haven't tried my DLink (w/ digital chipset) in the OSx86 box yet, but it's a hybrid card that works in PCs and Apple hardware natively. Link to comment Share on other sites More sharing options...
maltloaf Posted August 21, 2005 Share Posted August 21, 2005 my broadcom 440x built into my inspiron 9100 laptop works fine right out of the box Link to comment Share on other sites More sharing options...
hooozer Posted August 22, 2005 Share Posted August 22, 2005 Adaptec ANA6911A/TX - works in native mode Link to comment Share on other sites More sharing options...
Mr. Bond Posted August 22, 2005 Share Posted August 22, 2005 I've written up a quick guide on the wiki on how I set up my network card using the Darwin Tulip kext. See here Link to comment Share on other sites More sharing options...
rohde Posted August 22, 2005 Share Posted August 22, 2005 I've written up a quick guide on the wiki on how I set up my network card using the Darwin Tulip kext. See here <{POST_SNAPBACK}> Thanks for the tip. Unfortunately it didn't work with my VIA Rhine II Fast Ethernet Adapter Link to comment Share on other sites More sharing options...
CapAmerica Posted August 23, 2005 Share Posted August 23, 2005 I've written up a quick guide on the wiki on how I set up my network card using the Darwin Tulip kext. See here <{POST_SNAPBACK}> Cool thanks that worked... well at least with one on my Network cards =P It worked great with my Linksys LNE100TX card. But it didn't work with the NVidia nForce Network built into my motherboard and it didn't work with my Belkin Wireless G Network Card. Also it seem to have broken Safari, It uses to start before I added Tulip but now it won't. =/ Link to comment Share on other sites More sharing options...
Sykaryce Posted August 23, 2005 Share Posted August 23, 2005 Accton EN1017 works...however..with weird problems....i can like numerous PCI Ethernet detected and a built-in ethernet option in networks lol... Link to comment Share on other sites More sharing options...
thesleeper Posted August 23, 2005 Share Posted August 23, 2005 I got some erros of file not found in the installation is that normal? Link to comment Share on other sites More sharing options...
arthurz Posted August 23, 2005 Share Posted August 23, 2005 My marvell yukon 88E8001/8003/800 PCI Gigabit Ethernet Controller (on Asus P4P800 SE) doesn't work Link to comment Share on other sites More sharing options...
AutoStatic Posted August 23, 2005 Share Posted August 23, 2005 my Broadcom 57xx Onboard NIC does NOT WORKI have Dell Optiplex GX280 please, if someone can remove that card from supported list, because IT DOES NOT WORK, and I have tried virtualy anything possible to make it work... <{POST_SNAPBACK}> Same setup here and the same problem. Tried the Tulip kext also, to no avail. Link to comment Share on other sites More sharing options...
thesleeper Posted August 23, 2005 Share Posted August 23, 2005 This is what I'm getting at installation Last login: Tue Aug 23 16:34:51 on ttyp1 Welcome to Darwin! tiger-x86:~ thesleeper$ cd /Users/thesleeper/Desktop/darwin_tulip-x86-1-0-0/ tiger-x86:~/Desktop/darwin_tulip-x86-1-0-0 thesleeper$ sudo make install Password: set +e; for x in /Users/thesleeper/Desktop/darwin_tulip-x86-1-0-0/tulip.kext/Contents/MacOS /Users/thesleeper/Desktop/darwin_tulip-x86-1-0-0/tulip.kext/Contents /Users/thesleeper/Desktop/darwin_tulip-x86-1-0-0/tulip.kext/Contents/Resources/English.lproj; do \ test -d $x || mkdir -p $x; \ done WARNING: Installation step will check if this driver is already installed and loaded. If it is, it will delete the original driver and install the new one. A reboot will load the new driver, or follow the instructions printed at the end of the installation for manually unloading the old driver and loading the new one. cp: ./tulip: No such file or directory cp: ./bundle/Info.plist: No such file or directory cp: ./bundle/InfoPlist.strings: No such file or directory /Users/thesleeper/Desktop/darwin_tulip-x86-1-0-0/tulip.kext does exist. Continuing... sudo mv /System/Library/Extensions/tulip.kext /tmp/backuptulip sudo mv /tmp/tulip.kext /System/Library/Extensions echo ""; \ echo "To load this driver without going through a reboot, follow these steps.";\ echo "WARNING: Unloading the old driver will disrupt your network on this machine if it is active!!"; \ echo ""; \ echo "1. Type: sudo kextunload /System/Library/Extensions/tulip.kext"; \ echo " note: This command will request your Administrator or root password"; \ echo "2. Type: sudo kextload /System/Library/Extensions/tulip.kext"; \ echo "3. Done!" To load this driver without going through a reboot, follow these steps. WARNING: Unloading the old driver will disrupt your network on this machine if it is active!! 1. Type: sudo kextunload /System/Library/Extensions/tulip.kext note: This command will request your Administrator or root password 2. Type: sudo kextload /System/Library/Extensions/tulip.kext 3. Done! tiger-x86:~/Desktop/darwin_tulip-x86-1-0-0 thesleeper$ Is this normal? I don't think so it says some files don't exist What have I done wrong, I really need some help here! thanks Link to comment Share on other sites More sharing options...
torrentmasta Posted August 24, 2005 Share Posted August 24, 2005 Realtek 10/100M = works great (built-in ethernet, haha) Marvel Yukon Gigabit Ethernet = not work (sob sob) Link to comment Share on other sites More sharing options...
arthurz Posted August 24, 2005 Share Posted August 24, 2005 Realtek 10/100M = works great (built-in ethernet, haha) Marvel Yukon Gigabit Ethernet = not work (sob sob) <{POST_SNAPBACK}> Marvel sucks none of its model is listed in the HCL Link to comment Share on other sites More sharing options...
jccool Posted August 25, 2005 Share Posted August 25, 2005 my FIREWIRE M-Audio 410 does not work ...........d915gav motherboard 3.4ghz sse3 running it natively 149gig drive .....does anyone have a card that supports ASIO up and running i have not seen one yet Link to comment Share on other sites More sharing options...
rohde Posted August 25, 2005 Share Posted August 25, 2005 Sadly no luck with D-Link DFE-530TX I wil add it to the wiki under "not supported". Link to comment Share on other sites More sharing options...
cabron Posted August 25, 2005 Share Posted August 25, 2005 Any Realtek network card will work? like: REALTEK 8139C, REALTEK 8139I, REALTEK RTL 8139D Link to comment Share on other sites More sharing options...
dogbert Posted August 27, 2005 Share Posted August 27, 2005 Any Realtek network card will work?like: REALTEK 8139C, REALTEK 8139I, REALTEK RTL 8139D <{POST_SNAPBACK}> carbon, bump & rtfm. Link to comment Share on other sites More sharing options...
cabron Posted August 27, 2005 Share Posted August 27, 2005 carbon, bump & rtfm. <{POST_SNAPBACK}> screw up man i just having some curiosity Link to comment Share on other sites More sharing options...
dogbert Posted August 27, 2005 Share Posted August 27, 2005 screw up mani just having some curiosity <{POST_SNAPBACK}> you just demonstrated your inability to use the forum's search function and/or the wiki - shame on you! Link to comment Share on other sites More sharing options...
mikesown Posted August 27, 2005 Share Posted August 27, 2005 I have a realtek 8139 family, which seems to be pretty common, as my laptop has this too. Works beautifully! Link to comment Share on other sites More sharing options...
Recommended Posts