Edd Posted October 7, 2005 Share Posted October 7, 2005 Realtek RTL8139/810x Family Fast Ethernet NIC Worked perfectly on native install. Link to comment Share on other sites More sharing options...
JAWS13 Posted October 9, 2005 Share Posted October 9, 2005 just thought I would add mine. I just pulled this one out of a bag of parts I had. 3com EtherLink XL PCI 3C900B-TPO REV. A On the Chip: Parallel Tasking II Lucent 40-04564 nothing special, but it works Link to comment Share on other sites More sharing options...
gnomes Posted October 10, 2005 Share Posted October 10, 2005 D-Link 530TX Rev. C doesn't work VIA Velocity doesn't work RealTek 8019 doesn't work Neither work using either built-in or Tulip Apparently the 530TX's that ar Rev A and Rev B do work however. Link to comment Share on other sites More sharing options...
anhaedra Posted October 13, 2005 Share Posted October 13, 2005 I don't know what it is, but it's old as hell (from a powermac 5200) and it's been rained on and it's rusty. Link to comment Share on other sites More sharing options...
Merlwiz79 Posted October 18, 2005 Share Posted October 18, 2005 I had tried: CNet PRO200WL PCI Fast Ethernet Adapter D-Link DFE-530TX Realtek 8139B with no luck. Then i noticed my cable modem had a usb connection... I tried it, and it immediately detected the usb connection as built in ethernet.. So nice! What kind of cable modem do you have? Link to comment Share on other sites More sharing options...
ianjw11 Posted October 19, 2005 Share Posted October 19, 2005 i have a hp broadcom B/G wifi card working Link to comment Share on other sites More sharing options...
mmisiek32 Posted October 19, 2005 Share Posted October 19, 2005 Realtek that saunds great but what with the Via network cards?Does tthey work?? Link to comment Share on other sites More sharing options...
macgirl Posted October 19, 2005 Share Posted October 19, 2005 Realtek that saunds great but what with the Via network cards?Does tthey work?? Did you check the Wiki? Link to comment Share on other sites More sharing options...
cplex Posted October 23, 2005 Share Posted October 23, 2005 my gigabyte gn-wpkg with realtek chip works great with wep.i found the driver /tool on the wiki osx86 page here http://forum.osx86project.org/index.php?ac...ype=post&id=418 Link to comment Share on other sites More sharing options...
MoldyBread Posted October 24, 2005 Share Posted October 24, 2005 Realtek sound like it works well Only prob with my set up is that I have an ASUS P4P800 SE, someone should make a KEXT for Marvel.......so many people would benifit. Link to comment Share on other sites More sharing options...
Jocose Posted November 1, 2005 Share Posted November 1, 2005 Okay I am running an A8N Deluxe board with a AMD 3200+ X2 CPU. I just stuck in an older 3c905X NIC card I had laying around. When the OS boots up If I click on Safari super fast I can load the apple home page and click on a few links and then BANG the internet is gone. I can't get it back unless I restart. I have no clue how to fix this. BTW I am running in "platform=X86PC" mode and when I don't it seams as though I can stay online a little longer before it just kicks me off but then I get this black box saying I have to restart the computer. Any Ideas? Thanks Link to comment Share on other sites More sharing options...
Giedriux001 Posted November 2, 2005 Share Posted November 2, 2005 My intel PRO/1000 PM is working on Intel D955XBK motherboard. My intel PRO/1000 PM is working on Intel D955XBK motherboard. Link to comment Share on other sites More sharing options...
vviinnzz Posted November 4, 2005 Share Posted November 4, 2005 OvisLink Evo-W54USB works (Ralink based) still have some troubles... disconnects every xxminutes, might be because the airport base is too distant Link to comment Share on other sites More sharing options...
cremes Posted November 5, 2005 Share Posted November 5, 2005 An earlier poster wrote up some instructions on using the tulip driver to get a bunch of different DEC tulip based cards working. I'm the author of that driver and wanted to point out that there is a newer version of the driver available. Always check the sourceforge page where the driver lives to get the latest and greatest version. Version 1.2.0 is available from there and should compile cleanly on any Tiger-based system. I released the code before fully testing on Panther so it doesn't compile correctly "out of the box" for 10.3 or earlier. If you have questions on this, feel free to post here and I'll check back periodically. Link to comment Share on other sites More sharing options...
witzer Posted November 10, 2005 Share Posted November 10, 2005 i have a D-link DFE-538TX ethernet card installed. it is listed as working / compatible hardware for osx86. in Windows, it was detected as Realtek RTL8139 card. it worked. but in osx86, it isn't listed on the network in the "system preferences". in the "system profile" however, there's a ethernet card listed as en0. what am i doing wrong here? tried tulip but no result. for those who has 8139 cards working for you, what are the steps you take to get the card working post installation of osx? Link to comment Share on other sites More sharing options...
amartins05 Posted November 10, 2005 Share Posted November 10, 2005 Guys, add a new card on the list. It's not wireless, only PCI but it's only 14 bucks at Walmart. Network Everywhere PCI Ethernet Card Model # NC100U-WM. I used the Tulip driver and everything is great now Link to comment Share on other sites More sharing options...
witzer Posted November 16, 2005 Share Posted November 16, 2005 well never mind me. i got it working already. dunno how though. when i add my dev and vendor id to the 8139 kext, nothing happen. then i pulled the card and plugged back it, the osx read the card loud and clear. Link to comment Share on other sites More sharing options...
rajkosto Posted November 22, 2005 Share Posted November 22, 2005 my nforce 4 gigabit ethernet doesnt work ... someone should dig up a driver for these,loads of people have em Link to comment Share on other sites More sharing options...
Absolute Posted November 24, 2005 Share Posted November 24, 2005 I have a ASUS A8V Deluxe mobo with built-in Marvell 88E8001 ethernet. Doesn't work. It would be nice for someone to make a kext for the Marvell cards, because one kext would work with many of the recent ASUS mobos, which use Marvell ethernet adapters. I have an Gigabyte K8NXP-SLI with a built-in Marvell Yukon 88E8053 PCI-E adapter, doesn't work here. Link to comment Share on other sites More sharing options...
Thor Posted November 25, 2005 Share Posted November 25, 2005 Does any card work in gigabit mode.10/100/1000? Link to comment Share on other sites More sharing options...
zazman Posted November 25, 2005 Share Posted November 25, 2005 My NETGEAR FA310TX doesn't seems to work or is only partially recognized : see my test with screen captures : http://forum.osx86project.org/index.php?showtopic=4807 But the question i have is : As i must boot OSX86 on my system with platform=X86PC, could it make my ethernet card not completely working ? Link to comment Share on other sites More sharing options...
dougaa Posted November 25, 2005 Share Posted November 25, 2005 Does any card work in gigabit mode.10/100/1000? Yes, the Netgear GA311 works in gigabit mode. Link to comment Share on other sites More sharing options...
mmm66 Posted November 25, 2005 Share Posted November 25, 2005 in my notebook i have a sis 900 and with mac os 10.4.1 it don't work. do you know if it work in 10.4.3? tnx Link to comment Share on other sites More sharing options...
ryan_d Posted November 27, 2005 Share Posted November 27, 2005 I need help with the tulip driver. I try the command "make install" and it says make: command not found. what do i need to do to get it to compile? Any help would be appreciated. If anyone has the tulip.kext already compiled for 10.4.3 and some instructions that would be great too. Link to comment Share on other sites More sharing options...
slickfire Posted November 28, 2005 Share Posted November 28, 2005 ok, so i've installed OSx86 on my Sony TR3A which is a 1 ghz centrino (intel pentium m with an intel wireless controller) the wireless won't work but the on board ethernet works natively with no problems Link to comment Share on other sites More sharing options...
Recommended Posts