rramon Posted February 5, 2009 Share Posted February 5, 2009 hi folks, anyone tried the d-link dwa-556 card? it´s a draft n pci express card.. any comments appreciated! Link to comment Share on other sites More sharing options...
Spaser Posted February 6, 2009 Share Posted February 6, 2009 Hi guys, I have IDeneb 1.5.4, and there is no way to make my mobo(GAp35-DS3) integrated adapter (chip realtek 8168/8111B) work. I tryed: 1) IOnetwokfamily.kext 2) This http://www.insanelymac.com/forum/index.php?showtopic=29436 solution But still nothing, the adapter don`t even have power on it, in XP i works perfectly. And also i have Scientific Atlanta (Webstar) modem 2100, i try to connect it via USB, but have no drivers for it (for MAC OS) - so it initialise in OS and shows in "Networking" as Ethernet 2. Because i have no drivers it shows wrong IP adress (DHCP auto mode) like 164.67... In Manual i can set my real IP and DNS servers, but it is still can not open pages. What can i do, baybe some drivers for 2100Webstar - didn`t foud them on internet. Thanks in advance! Link to comment Share on other sites More sharing options...
Adam_86 Posted March 12, 2009 Share Posted March 12, 2009 Hy guys! I have a big question! I've got an Intel Pro/Wireless 3945ABG Wireless card in my Acer travelmate 4233WLMi, but it doesen't work, and I don't find driver for it. I decide I'll buy a new PCI-Express card in my notebook. For example the Gigabyte GN-WI01GT Is it good? Is it working whit my Mac OS X Kaylaway 10.5.2? I want to use the Airport and I want to that, Mac OS X Kaylaway 10.5.2 recognize the new WiFi card and I can connect WEP or WPA Wifi system. What do you think? Is it good, and possible? Link to comment Share on other sites More sharing options...
fighterhawk Posted March 22, 2009 Share Posted March 22, 2009 I need a card where I can change the Ethernet MAC address since my ISP binds internet access by MAC. Any suggestions? My onboard marvell yukon doesn't allow me to change it. Link to comment Share on other sites More sharing options...
Bassy Sweeeeet Posted April 12, 2009 Share Posted April 12, 2009 Can someone please help me with my post? im trying to get my Atheros wireless to work with 10.5.6 but it just isn't working. Go to this link http://www.insanelymac.com/forum/index.php?showtopic=161634 -Bass-2k9 Link to comment Share on other sites More sharing options...
LatinMcG Posted June 13, 2009 Share Posted June 13, 2009 WG111 V2 and V3 has drivers at netgear's site. i tested v3 working. had to use realteks driver for V2 in prior experience with older driver at netgears site.. (new april 21-09 driver for v2 might be working now) Link to comment Share on other sites More sharing options...
CaBuffalo Posted June 30, 2009 Share Posted June 30, 2009 Can some of you list network cards that you have working (native), I can't seem to get mine to show up so I'll go pick one up at the store. I'm using a DLINK DGE-530T with IPC 10.5.6. It works flawlessly. Link to comment Share on other sites More sharing options...
Galla Posted July 1, 2009 Share Posted July 1, 2009 just confirming that usb wlan adaper Airlive WL-1600USB (ovislink) works just fine on iatkos v7 10.5.7. using drivers for Mac downloaded from their web site. That adapter is great value for money, it has detachable antenna with exceptional reception, the best I had... Link to comment Share on other sites More sharing options...
Il Francy MacPc Posted July 4, 2009 Share Posted July 4, 2009 Hi, just want to share my experience w/ D-Link DWA-547 AR5416 (Atheros 5008 family chipset). It worked OOB from 10.5.2 to 10.5.6 then had troubles detecting network since AirPort Client Update 2009-001 IO80211Family.kext version 2.1.5 instead w/ 10.5.6 stock IO80211Family.kext version 2.1.4 works flawlessly. I noticed that on first boot after OS X updates network is always recognized. From second reboot on, it is no more. This also happens mostly after switching from W_in_ native boot, there working good. I am convinced it may be a problem related to uncorrect PCI slots addressing in BIOS. Device must be plugged to the first upper slot (en1). Now I'm on 10.5.7 fully up to date and BIOS is F6 final. If happens any wireless network not recognized, is solved entering setup and saving BIOS CMOS w/ the same settings. Mind if you connect by PPPoE on AirPort your new service name has to follow alphabetically AirPort as the upper service in the left column of Network preferences is the one discovering networks. The Set Service Order instead needs the PPPoE service in first upper place. Check Preferred Networks in AirPort Advanced preferences after connecting PPPoE for the first time and add your network again because it gets deleted. AirPort Card Information: Wireless Card Type: AirPort Extreme (0x168C, 0x3A6B) Wireless Card Locale: Unknown Wireless Card Firmware Version: 1.4.8.3 Current Wireless Network: Wireless Channel: 1 Link to comment Share on other sites More sharing options...
Soner Posted July 17, 2009 Share Posted July 17, 2009 Hi,just want to share my experience w/ D-Link DWA-547 AR5416 (Atheros 5008 family chipset). It worked OOB from 10.5.2 to 10.5.6 then had troubles detecting network since AirPort Client Update 2009-001 IO80211Family.kext version 2.1.5 instead w/ 10.5.6 stock IO80211Family.kext version 2.1.4 works flawlessly. I noticed that on first boot after OS X updates network is always recognized. From second reboot on, it is no more. This also happens mostly after switching from W_in_ native boot, there working good. I am convinced it may be a problem related to uncorrect PCI slots addressing in BIOS. Device must be plugged to the first upper slot (en1). Now I'm on 10.5.7 fully up to date and BIOS is F6 final. If happens any wireless network not recognized, is solved entering setup and saving BIOS CMOS w/ the same settings. Mind if you connect by PPPoE on AirPort your new service name has to follow alphabetically AirPort as the upper service in the left column of Network preferences is the one discovering networks. The Set Service Order instead needs the PPPoE service in first upper place. Check Preferred Networks in AirPort Advanced preferences after connecting PPPoE for the first time and add your network again because it gets deleted. AirPort Card Information: Wireless Card Type: AirPort Extreme (0x168C, 0x3A6B) Wireless Card Locale: Unknown Wireless Card Firmware Version: 1.4.8.3 Current Wireless Network: Wireless Channel: 1 Mine is working but with slow speeds. I changed the IO80211Family.kext back to 2.1.4 but it's the same. Juste one thing, in my information the Wireless Card Firmware Version is 1.4.8.0 Link to comment Share on other sites More sharing options...
Adam_86 Posted July 20, 2009 Share Posted July 20, 2009 Hy guys! Please help me! I need a mini pci wifi card in my acer travelmate 4233wlmi. What do you think? This card working on Mac with wep, wpa, etc? Or which miniPCI (NOT miniPCI express!) card is working on Mac with wep, wpa etc? Thanks your answer! Link to comment Share on other sites More sharing options...
1234s282 Posted July 23, 2009 Share Posted July 23, 2009 I can fully confirm that Intel Pro 100 VE Onboard Lan Works Straight Out Of Box With Kalyway 10.4.10 (You have to select the drivers on the custom install menu) Link to comment Share on other sites More sharing options...
Gabo_c Posted July 29, 2009 Share Posted July 29, 2009 Can some of you list network cards that you have working (native), I can't seem to get mine to show up so I'll go pick one up at the store. Mine TL-WN851N ver. 1.0 Works Out Of the box Link to comment Share on other sites More sharing options...
dinner_plate Posted July 30, 2009 Share Posted July 30, 2009 hi folks, anyone tried the d-link dwa-556 card? it�s a draft n pci express card.. any comments appreciated! The DWA 556 works beautifully as a native Airport Express card on my GA-G33M-S2. It only operates on the 2.4GHz band though (not dual-band/MIMO 5GHz0 so I have received and am testing the Mini PCI-E / PCI-E adapter MP2W (vers. 2.11 with 2.4/5.8G antennas) and a native Atheros Mini PCI-E Wireless N card pulled from a MacBook. This should result in native 2.4GHz/5GHz operation with my Airport Extreme and Mac Mini. Link to comment Share on other sites More sharing options...
kdawg Posted August 29, 2009 Share Posted August 29, 2009 The DWA 556 works beautifully as a native Airport Express card on my GA-G33M-S2. It only operates on the 2.4GHz band though (not dual-band/MIMO 5GHz0 so I have received and am testing the Mini PCI-E / PCI-E adapter MP2W (vers. 2.11 with 2.4/5.8G antennas) and a native Atheros Mini PCI-E Wireless N card pulled from a MacBook. This should result in native 2.4GHz/5GHz operation with my Airport Extreme and Mac Mini. What was the outcome of the card adapter? Link to comment Share on other sites More sharing options...
one nine Posted August 29, 2009 Share Posted August 29, 2009 can ethernet(dell inspiron 1420) working? anybody help me? Link to comment Share on other sites More sharing options...
whiskas Posted September 8, 2009 Share Posted September 8, 2009 a good card to use is the belkin f5d7050 (REV v4000 and up) here is the driver i also put together super easy installation no terminal or command line needed for install and setup also a little readme included Link to comment Share on other sites More sharing options...
invisiblesurfer Posted September 30, 2009 Share Posted September 30, 2009 a good card to use is the belkin f5d7050 (REV v4000 and up) here is the driver i also put together super easy installation no terminal or command line needed for install and setup also a little readme included Thanks for that mate! Is the F5D7050 recognised by airport? Also, does it work with 10.6 ? Link to comment Share on other sites More sharing options...
MAC IN TOSH Posted October 8, 2009 Share Posted October 8, 2009 Hi, I have hp dv6735ee laptop having iAtokos v1.0i r2 installed on it. Currenty only my ethernet port is working and not the dial-up modem port. So is there a way of getting it to work pleaseeeeeeeeee. Link to comment Share on other sites More sharing options...
0me Posted October 13, 2009 Share Posted October 13, 2009 well i knoe for a fact that the car that was listed in the LH tut does not work since i think ive tried every thing possible, so im going to pick this up in a little bit form my local microcenter here she is. http://microcenter.com/single_product_resu...duct_id=0305503 it states its mac compatible but i knoe better then to expect results over night with this now anyone knoe if it works Link to comment Share on other sites More sharing options...
bmxcamel Posted October 14, 2009 Share Posted October 14, 2009 Has anyone managed to get a PCI or USB 802.11 card/dongle working in 64 bits Snow Leopard yet? I've been scouring the internet for hours trying to find someone who has had success...any help is appreciated!! Link to comment Share on other sites More sharing options...
dan b Posted October 14, 2009 Share Posted October 14, 2009 Has anyone managed to get a PCI or USB 802.11 card/dongle working in 64 bits Snow Leopard yet? I've been scouring the internet for hours trying to find someone who has had success...any help is appreciated!! linksys wusb100 is working in 64 bits (ralink kext and app for 10.6) Link to comment Share on other sites More sharing options...
Sekhmet66 Posted October 23, 2009 Share Posted October 23, 2009 TP-Link WN951N (AR5416) works natively as Airport Extreme, only step required is turning it on via Network Assistant in network prefs. Link to comment Share on other sites More sharing options...
Galla Posted November 24, 2009 Share Posted November 24, 2009 i think all RT2870 chipset usb wifi sticks work in snow leo at 64 bits, drivers on ralink web Link to comment Share on other sites More sharing options...
multimolti Posted January 20, 2010 Share Posted January 20, 2010 I have a VIA® VT6103L 10/100 Mbps Fast Ethernet PHY and it's NOT WORKING. I also plugged in some Microsoft PCI Card, it's not working either. Thinking of getting an Realtek 8139 Ethernet card, for 4€ it's OK I guess. Link to comment Share on other sites More sharing options...
Recommended Posts