Jump to content

Lion installation via USB stick using Chameleon

MaLd0n

By MaLd0n,
in OSx86 10.7 (Lion)

 Share
1,466 posts in this topic

Recommended Posts

Mackenstein
Mackenstein
Posted
Posted
889

0x79, 0x03, 0x00, 0x00

 

12

0x0C, 0x00, 0x00, 0x00

 

It's been a long time since I feel like a n00b

It should be clear, but I don't get it!

Should I go via (1) or (2) solution?

 

Original

device (HDEF)
		{
			Name (_ADR, 0x001B0000)
			Method (_PRW, 0, NotSerialized)
			{
				Return (Package (0x02)
				{
					0x0D, 
					0x05
				})
			}

			Method (_DSM, 4, NotSerialized)
			{
				Store (Package (0x04)
					{
						"layout-id", 
						Buffer (0x04)
						{
							0x0C, 0x00, 0x00, 0x00
						}, 

						"PinConfigurations", 
						Buffer (Zero) {}
					}, Local0)
				DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
				Return (Local0)
			}
		}

 

solution (1)

device (HDEF)
		{
			Name (_ADR, 0x001B0000)
			Method (_PRW, 0, NotSerialized)
			{
				Return (Package (0x02)
				{
					0x0D, 
					0x05
				})
			}

		}

 

solution (2)

device (HDEF)
		{
			Name (_ADR, 0x001B0000)
			Method (_PRW, 0, NotSerialized)
			{
				Return (Package (0x02)
				{
					0x0D, 
					0x05
				})
			}

			Method (_DSM, 4, NotSerialized)
			{
				Store (Package (0x04)
					{
						"layout-id", 
						Buffer (0x04)
						{
							0x79, 0x03, 0x00, 0x00
						}, 

						"PinConfigurations", 
						Buffer (Zero) {}
					}, Local0)
				DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
				Return (Local0)
			}
		}

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
It's been a long time since I feel like a n00b

It should be clear, but I don't get it!

Should I go via (1) or (2) solution?

 

Original

device (HDEF)
		{
			Name (_ADR, 0x001B0000)
			Method (_PRW, 0, NotSerialized)
			{
				Return (Package (0x02)
				{
					0x0D, 
					0x05
				})
			}

			Method (_DSM, 4, NotSerialized)
			{
				Store (Package (0x04)
					{
						"layout-id", 
						Buffer (0x04)
						{
							0x0C, 0x00, 0x00, 0x00
						}, 

						"PinConfigurations", 
						Buffer (Zero) {}
					}, Local0)
				DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
				Return (Local0)
			}
		}

 

solution (1)

device (HDEF)
		{
			Name (_ADR, 0x001B0000)
			Method (_PRW, 0, NotSerialized)
			{
				Return (Package (0x02)
				{
					0x0D, 
					0x05
				})
			}

		}

 

solution (2)

device (HDEF)
		{
			Name (_ADR, 0x001B0000)
			Method (_PRW, 0, NotSerialized)
			{
				Return (Package (0x02)
				{
					0x0D, 
					0x05
				})
			}

			Method (_DSM, 4, NotSerialized)
			{
				Store (Package (0x04)
					{
						"layout-id", 
						Buffer (0x04)
						{
							0x79, 0x03, 0x00, 0x00
						}, 

						"PinConfigurations", 
						Buffer (Zero) {}
					}, Local0)
				DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
				Return (Local0)
			}
		}

try solution 2

remove HDAENABLER

Link to comment
Share on other sites
desper@do
desper@do
Posted
Posted

Hi, My hackintosh works perfectly. the only problem is the sleep. i solved shotdown problem thanks to evoreboot.

when i try tu put my pc in splee, my monitor turn off, but my pc stay on, and i can't wake it.

what should i do???

thanks

(p5e3 deluxe, q6600, gt 512 oc, NO dsdt.aml)

Link to comment
Share on other sites
Candurin
Candurin
Posted
Posted
Hi, My hackintosh works perfectly. the only problem is the sleep. i solved shotdown problem thanks to evoreboot.

when i try tu put my pc in splee, my monitor turn off, but my pc stay on, and i can't wake it.

what should i do???

thanks

(p5e3 deluxe, q6600, gt 512 oc, NO dsdt.aml)

 

 

Try openhaltrestart instead. Put it in Extra/Extentions. Worked for my p5Q Deluxe (but, I can't gurantee it will work for the P5e3).

OpenHaltRestart.kext.zip

Link to comment
Share on other sites
Mackenstein
Mackenstein
Posted
Posted
try solution 2

remove HDAENABLER

 

hi MaLd0n, thanks for showing me the way. :(

 

but I'm still getting KP.

After force shutdown my system disk dies.

when I try to repair it, from Lion install pen, with Disk Util it stops with the following error:

Error: Disk Utility can't repair this disk... disk, and restore your backed-up files.

 

In other words... You're f#$%&

 

Then I ave to both into backup system disk, repair it with Disk 'time consuming' Warrior. Re-install Chameleon (or it wont boot)

 

any suggestions (maybe it's something to do with SATA controller...)?

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
hi MaLd0n, thanks for showing me the way. :rolleyes:

 

but I'm still getting KP.

After force shutdown my system disk dies.

when I try to repair it, from Lion install pen, with Disk Util it stops with the following error:

Error: Disk Utility can't repair this disk... disk, and restore your backed-up files.

 

In other words... You're f#$%&

 

Then I ave to both into backup system disk, repair it with Disk 'time consuming' Warrior. Re-install Chameleon (or it wont boot)

 

any suggestions (maybe it's something to do with SATA controller...)?

I have no idea

Link to comment
Share on other sites
magnifico
magnifico
Posted
Posted

Maldon.i have a very problem..

Also new mouse logiteck

 

Sep 21 18:21:38 Mac-Pro-di-Magnifico kernel[0]:  USBF:	9.369	AppleUSBEHCI[0xffffff802317f000]::Found a transaction  which hasn't moved in 5 seconds on bus 0x1a, timing out! (Addr: 0, EP:  0)
Sep 21 18:21:38 Mac-Pro-di-Magnifico kernel[0]:  USBF:	9.436	[0xffffff8023284a00] The IOUSBFamily is having trouble  enumerating a USB device that has been plugged in.  It will keep  retrying.  (Port 6 of Hub at 0x1a100000)
Sep 21 18:21:39  Mac-Pro-di-Magnifico kernel[0]: USBF:	11. 70	[0xffffff8023284a00]  The IOUSBFamily has successfully enumerated the device.
Sep 21 18:21:39 Mac-Pro-di-Magnifico kernel[0]: 0		0 AppleUSBCDC: start - initDevice failed
Sep  21 18:21:46 Mac-Pro-di-Magnifico kernel[0]:  USBF:	17.372	AppleUSBEHCI[0xffffff802317f000]::Found a transaction  which hasn't moved in 5 seconds on bus 0x1a, timing out! (Addr: 0, EP:  0)
Sep 21 18:21:46 Mac-Pro-di-Magnifico kernel[0]:  USBF:	17.408	[0xffffff8023284a00] The IOUSBFamily is having  trouble enumerating a USB device that has been plugged in.  It will keep  retrying.  (Port 6 of Hub at 0x1a100000)
Sep 21 18:21:46  Mac-Pro-di-Magnifico kernel[0]: USBF:	18.210	[0xffffff8023284a00]  The IOUSBFamily has successfully enumerated the device.
Sep 21 18:21:46 Mac-Pro-di-Magnifico kernel[0]: 0		0 AppleUSBCDC: start - initDevice failed
Sep  21 18:21:47 Mac-Pro-di-Magnifico kernel[0]:  USBF:	18.772	[0xffffff8023284a00] The IOUSBFamily is having  trouble enumerating a USB device that has been plugged in.  It will keep  retrying.  (Port 6 of Hub at 0x1a100000)
Sep 21 18:22:02 Mac-Pro-di-Magnifico kernel[0]: Saiph 3200 Gaming Mouse::terminate(kIOServiceSynchronous) timeout
Sep  21 18:22:02 Mac-Pro-di-Magnifico kernel[0]: USBF:	34.  76	[0xffffff8023284a00] The IOUSBFamily was not able to enumerate a  device.
Sep 21 18:22:03 Mac-Pro-di-Magnifico kernel[0]: 0		0 AppleUSBCDC: start - initDevice failed

Link to comment
Share on other sites
desper@do
desper@do
Posted
Posted
Try openhaltrestart instead. Put it in Extra/Extentions. Worked for my p5Q Deluxe (but, I can't gurantee it will work for the P5e3).

 

the resoult is the same as evoreboot. only shutdown and reboot works, but no sleep!!!

my monitor go off by my pc stay on!!!! what should i do???

thanks

Link to comment
Share on other sites
voyanger
voyanger
Posted
Posted

Hello,

I've got the problem where the mouse and keyboard turns off when it reaches the welcome screen, and thus i cannot do anything, thus I'm stuck.

If I use the bootCD it gives me the [PCI CONFIGURATION START] hang, note that I have used npci=2000 and to try and fix my USB problem I have tried USBBusFix=Yes in the com.apple.Boot.plist for boot cds and org.chameleon.Boot.plist for chameleon, to no avail the USB mouse and keyboard doesn't work, even in safe mode.

I have even resorted from getting a DSTD for my motherboard from Tonymac, yet mouse and keyboard still doesn't work, I've tried various other install methods and they don't work either.

Specs

Gigabyte GA-P55A-UD3R

Intel Core i5 750

8GB ddr3 ram

nVidia GTS 250

 

All bios settings are correct, AHCI, 64bit HPET.

Attached is the dstd file and my org.chameleon.boot.plist file if it helps.

 

Regards

 

Voyanger

 

p.s. For now I've given up after spending two days on it.

If anyone has any Ideas on how to fix this please reply and PM as I think this is a gigabyte problem.

DSTD.aml.zip

org.chameleon.Boot.plist.zip

Link to comment
Share on other sites
kext755
kext755
Posted
Posted

Hi

 

I had a problem here:

 

Run the installers "Extra Lion" and "Chameleon RC5". ...

 

With the installer USB ready, boot it and install Lion to an HD partition.

 

I didn't install "Extra Lion" , just Chameleon 2.1 r1544.pkg. After I restarted there is an error booting (error 3F which is a "reserved" error). I see the BIOS splash screen but everything is locked. So is there anything to configure in the BIOS or hardware so Chameleon can boot?

I set the SATA Mode to ACHI, anything else?

- 1 memory stick?

- HPET Mode - 64-bit mode?

- ACPI Power mode: Set it to S3(STR)

 

This is the first time I try using Chameleon and I've read a lot but maybe I missed something?

Link to comment
Share on other sites
Mackenstein
Mackenstein
Posted
Posted
fck! :D

fresh install is my middle name! :)

I'll let know what went on in the end. All my best.

 

installed:

/Extra/Extensions/NullCPUPowerManagement.kext

and now it runs smoothly.

 

Full /Extra/Extensions list:

FakeSMC.kext --> Version 3.1.0

IOAHCIBlockStorageInjector.kext

NullCPUPowerManagement.kext

(for alc889)

ALC8xxHDA.kext --> Version 1.0.1

 

Edited /System/Library/Extensions

(For RADEON 6870)

ATI6000Controller.kext --> Version 1.6.34.13 (9707)

ATIFramebuffer.kext --> Version 1.6.34.13 (9707)

ATISupport.kext --> Version 1.6.34.13 (9707)

ATY_Init.kext --> http://netkas.org/?p=798

(for alc889)

AppleHDA.kext --> Version 1.7.9a4

(for Realtek RTL8111E --> Official Realtek 2.0.6)

/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleRTL8169Ethernet.kext

 

org.chameleon.Boot.plist

	...
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
...

 

smbios.plist

	...
<key>SMfamily</key>
<string>iMac</string>
...
<key>SMproductname</key>
<string>iMac12,2</string>
...

 

Hardware list: GA-Z68XP-UD5 + i7 2600K + GV-R687SO-1GD

 

I'll fine tune and OC it now, but with stock 3.40GHz it just scored 12721 :)

Link to comment
Share on other sites
Mackenstein
Mackenstein
Posted
Posted

humm... it looks like that the Kernel freezes are related to:

kernel[0]: IOSurface: buffer allocation size is zero

http://www.nanofunk.net/mac-osx-lion-10-7-...onsole-message/

 

I've download and installed http://labs.adobe.com/downloads/flashplayer11.html

I still do have the spam 'kernel[0]: IOSurface: buffer allocation size is zero' console message but at least it doesn't KP.

 

:) [KP alert]: here we go again... I'm getting very close to desperate.

Any help here will make my day.

last message before kernel panic on kernel.log was:

Kernel[0]: 1 pagetable corruption incident(s) detected, timeout: 0
Kernel[0]: Incident 0x0, reason: 0x4, action: 0x0, time: 0x12830042fbc
Kernel[0]: Write for 0xffffff804158c800 done, status e00002d6

 

is this a RAM related issue?

 

thanks in advance!

Link to comment
Share on other sites
Mackenstein
Mackenstein
Posted
Posted

Store changed my ram!

1st 3 seconds of memtest reported 4k errors :/

I asked if they wanted to keep the test going on just to make sure :)

 

Guys, my system looks rock solid now, I'm just short on sleep function.

What it does is, it turns of my screens but computer keeps running...

When pressing keyboard to kind of wake it up (it actually never sleeped) it takes ages to load screens and things fail, like keyboard, or to slow or what so haver.

 

I also tried Meklort xnu-sleep-enabler with same results.

 

Any ideas?

send_me.zip

Link to comment
Share on other sites
Mackenstein
Mackenstein
Posted
Posted
Hey, I'm doing this tutorial and I'm up to the bit where I need the DSDT.

 

How does one go about obtaining a DSDT patch?

 

If anyone can help, it'll be greatly appreciated.

 

To get proper help you need to make a proper question: your motherboard/hardware details and some status would help?!

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...