MaLd0n Posted May 10, 2011 Share Posted May 10, 2011 (edited) What you will need 1- Working Mac OS X (may be another PC or Mac) 2- USB drive (USB stick) 3- "Extra Lion" installer Extra_Lion.pkg.zip NEW Extra Lion DP4, GM and FINAL Extra_Lion_DP4.pkg.zip 4- Lion DMG 5- Chameleon RC5 http://www.insanelym...howtopic=227833 6- DSDT Auto-Patcher http://www.insanelym...howtopic=235523 BOOT CD HackBoot Lion http://www.insanelymac.com/forum/index.php...st&id=94070 Procedures Open Disk Utility, select the USB drive partition and click on the Erase tab. Select Mac Os Extended (Journaled) and click on the Erase button. Mount InstallESD.dmg *InstallESD.dmg Lion GM --> "Install Mac OS X Lion.app/Contents/SharedSupport". Open Terminal and run the command: open /Volumes/Mac\ OS\ X\ Install\ ESD/BaseSystem.dmg Now click on the Restore tab, drag Mac OS X Base System to Source and the USB drive partition to Destination, then click on the Restore button. This operation takes several minutes. The partition will have its name changed automatically to Mac OS X Base System after the restoration. After the restoration, open the restored partition, navigate to System/Installation, delete the Packages link and create a folder with the same name, Packages. Open Terminal and run the command: open /Volumes/Mac\ OS\ X\ Install\ ESD/Packages Copy the files to the Packages folder created previously. Run the installers "Extra Lion" and "Chameleon RC5". Remember to click on Change Install Location... and select the USB drive as destination, or they will be installed on the running system. With the installer USB ready, boot it and install Lion to an HD partition. * If you have problems in installation with the message "Mac OS X can't be installed on this computer", replace the file "OSInstall" in the folder System/Installation/Packages by this... OSInstall.zip After the installation, boot the USB drive again, but in Chameleon menu choose to boot the HD. The system is running, but it doesn't boot without the USB stick, then we have to install the bootloader (Chameleon), the essential kexts and the DSDT Post installation 1- Copy the Extra folder to the HD iMac9,1 / Core2Duo Extra_iMac9_1.zip iMac11,1 / Core i 1156 Extra_iMac11_1.zip iMac12,1 / Core i 1155 Extra_iMac12_1.zip MacPro3,1 / Core2Quad Extra_MacPro3_1.zip MacPro4,1 / Core i 1366 Extra_MacPro4_1.zip MacBook4,1 / Core2Duo Mobile Extra_MacBook4_1.zip MacBookPro6,1 / Core i Mobile Extra_MacBookPro6_1.zip MacBookPro8,1 / Sandy Bridge Extra_MacBookPro8_1.zip NEW Installer Extra Folder http://www.insanelym...howtopic=258606 2- Install Chameleon-2.0-RC5 (into Lion partition) 3- Run DSDT Auto-Patcher and copy the DSDT generated in the desktop to the Extra folder Power Management and restart fix use Chameleon RC5 Add in boot.plist <key>GeneratePStates</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> Downloads IOAHCIBlockStorageInjector IOAHCIBlockStorageInjector.kext.zip LegacyAHCI AHCIPortInjector.kext.zip NullCPUPowerManagement NullCPUPowerManagement.kext.zip Thanks and Credits to rooftopz, oldnapalm, RoggerioSarah and to all people in the community who developed the original Patches and Kexts. LINKS nForce OS X Lion (10.7) APP STORE DOWNLOAD INSTALL GUIDE on a Series 6 or 7 nForce chipset / Intel CPU MOBO Edited January 2, 2012 by Alessandro17 DSDT Auto-Patcher link doesn't work because it is in the trash 8 Link to comment Share on other sites More sharing options...
magnifico Posted May 10, 2011 Share Posted May 10, 2011 i'm here..thanks Maldon Link to comment Share on other sites More sharing options...
TheGemini Posted May 10, 2011 Share Posted May 10, 2011 First of all Thanks for the impressive guide! I followed it to the letter and now have a working Lion However, my cpu is not recognized correctly and therefore Lion is slow as #$&*(@. I've got the following setup: Asus p8p67-m core i5 2500k Sapphire Radeon 6850 I've followed all your steps, copied the extra folder from the macbook pro 8,1 (sandy bridge) added the kexts at the end of your post to the extra/extensions folder used kextutil to create a new mkext file for the extensions updated the boot.plist file to include SMBIOS=/Extra/smbios.plist My video card shows as a Radeon NI40 (same as under 10.6.7), has accelerated desktop but no working dvd player, etc... Network works, installed the lnx2mac 8111 driver from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Link to comment Share on other sites More sharing options...
MaLd0n Posted May 10, 2011 Author Share Posted May 10, 2011 added the kexts at the end of your post to the extra/extensions folder do you use NullCpuPowerManagement? try another bootloader for SandyBridge http://www.insanelymac.com/forum/index.php?showtopic=255866 Link to comment Share on other sites More sharing options...
TheGemini Posted May 11, 2011 Share Posted May 11, 2011 do you use NullCpuPowerManagement? try another bootloader for SandyBridge http://www.insanelymac.com/forum/index.php?showtopic=255866 Yes! That did the trick, used the Andy package. Installed it to the USB stick first and tried to boot from that, worked the first time. Now have a lion sporting a Core i5 which is blazing fast! Thanks again! Link to comment Share on other sites More sharing options...
magnifico Posted May 11, 2011 Share Posted May 11, 2011 Daniel, to me not part from the hd, I have put the boot in the root, but restart the PC From USB work , but from Hd don't work Link to comment Share on other sites More sharing options...
MaLd0n Posted May 11, 2011 Author Share Posted May 11, 2011 Daniel, to me not part from the hd, I have put the boot in the root, but restart the PC From USB work , but from Hd don't work use the same "Extra" and run Chameleon.pkg Link to comment Share on other sites More sharing options...
magnifico Posted May 11, 2011 Share Posted May 11, 2011 use the same "Extra" and run Chameleon.pkg already executed like from guide, but not work Link to comment Share on other sites More sharing options...
MaLd0n Posted May 11, 2011 Author Share Posted May 11, 2011 already executed like from guide, but not work do not use overclock Link to comment Share on other sites More sharing options...
magnifico Posted May 11, 2011 Share Posted May 11, 2011 do not use overclock Default?..... Link to comment Share on other sites More sharing options...
MaLd0n Posted May 11, 2011 Author Share Posted May 11, 2011 Default?..... Yep "load op. defaults" in setup, enable AHCI and HPET 64 Link to comment Share on other sites More sharing options...
magnifico Posted May 11, 2011 Share Posted May 11, 2011 Yep "load op. defaults" in setup, enable AHCI and HPET 64 Working Now , but I am always in overclock, perhaps I have understood what has happened, I explain you. .su the Snow Raid software I have the r700, and I left from this boot, will be this? Perhaps I have detached the SSD physically, and has left Lion, I enclose you my CABP, is from modification? com.apple.Boot.plist.zip Link to comment Share on other sites More sharing options...
aatkco Posted May 11, 2011 Share Posted May 11, 2011 Stuck on "Systemuptime in nanoseconds is 37909(Somenumber)" Despite I installed Chameleon to the Pendrive it changed my Snow's Bootloader and windows no longer boots ( I use modcd to boot into windows ) Link to comment Share on other sites More sharing options...
MaLd0n Posted May 11, 2011 Author Share Posted May 11, 2011 Working Now , but I am always in overclock, perhaps I have understood what has happened, I explain you. .su the Snow Raid software I have the r700, and I left from this boot, will be this?Perhaps I have detached the SSD physically, and has left Lion, I enclose you my CABP, is from modification? ??? Despite I installed Chameleon to the Pendrive it changed my Snow's Bootloader and windows no longer boots ( I use modcd to boot into windows ) Nope you did something wrong follow the procedure of the topic and do not forget to change the install location Link to comment Share on other sites More sharing options...
aatkco Posted May 11, 2011 Share Posted May 11, 2011 Ignore the windows problem, I repeated the whole Guide and booted from the flashdrive and the same thing happened, see the attached stuck picture BTW this happens seconds after choosing Mac OS X Base System from the Flash Chameleon List Tried booting using cpus=1 and it loaded a lot more lines but it stuck too . Link to comment Share on other sites More sharing options...
antipop2323 Posted May 12, 2011 Share Posted May 12, 2011 great guide, though i have minor issues... i get a boot0 error w/ chameleon installed on my lion hdd... but chameleon installs to my snow leopard hdd fine and boots up lion... everything fully functioning within lion... thanks 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 Ignore the windows problem, I repeated the whole Guide and booted from the flashdrive and the same thing happened, see the attached stuck picture BTW this happens seconds after choosing Mac OS X Base System from the Flash Chameleon List Tried booting using cpus=1 and it loaded a lot more lines but it stuck too . look it Taptun Chocolate Kernels (i.o.w. non-vanilia)These are for HP Pavilion DVx series laptops with the InSyde BIOS / lapic incompatibility. your problem may be that wait for Lion i get a boot0 error w/ chameleon installed on my lion hdd very strange Link to comment Share on other sites More sharing options...
antipop2323 Posted May 12, 2011 Share Posted May 12, 2011 very strange from preliminary searching, my problem with chameleon on the lion drive might just be that it's a 2TB HDD.. Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 from preliminary searching, my problem with chameleon on the lion drive might just be that it's a 2TB HDD.. WoW Link to comment Share on other sites More sharing options...
antipop2323 Posted May 12, 2011 Share Posted May 12, 2011 WoW I like the World of Warcraft Freudian slip Anyways, aside from strange chameleon issues, I noticed the fakesmc kext you linked in the OP wouldn't show me my cpu temps in iStat in lion... swapped it with my Snow Leopard one and worked well, should anyone run into that issue... Link to comment Share on other sites More sharing options...
magnifico Posted May 12, 2011 Share Posted May 12, 2011 ??? you have not understood my English Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 I like the World of Warcraft Freudian slip :mellow: Anyways, aside from strange chameleon issues, I noticed the fakesmc kext you linked in the OP wouldn't show me my cpu temps in iStat in lion... swapped it with my Snow Leopard one and worked well, should anyone run into that issue... Look it http://www.insanelymac.com/forum/index.php?showtopic=247185 you have not understood my English yep Link to comment Share on other sites More sharing options...
magnifico Posted May 12, 2011 Share Posted May 12, 2011 yep Ok, listen me, I have a raid with two SSD, boot the Camaleon r700, leaving from this boot, see the Lion disc, if I go on this disc and dò the shipment from keyboard, the PC restart, but if I detach the two ssd, removing the cable from the mainboard, Lion leaves. I am thinking, is the CABP that use on the Raid, that it has the string default partion? you have understood now Look my CABP in the post precedent :mellow: Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 Ok, listen me, I have a raid with two SSD, boot the Camaleon r700, leaving from this boot, see the Lion disc, if I go on this disc and dò the shipment from keyboard, the PC restart, but if I detach the two ssd, removing the cable from the mainboard, Lion leaves. I am thinking, is the CABP that use on the Raid, that it has the string default partion? you have understood now Look my CABP in the post precedent Sorry mag I have no idea Link to comment Share on other sites More sharing options...
oldnapalm Posted May 12, 2011 Share Posted May 12, 2011 Ok, listen me, I have a raid with two SSD, boot the Camaleon r700, leaving from this boot, see the Lion disc, if I go on this disc and dò the shipment from keyboard, the PC restart, but if I detach the two ssd, removing the cable from the mainboard, Lion leaves. I am thinking, is the CABP that use on the Raid, that it has the string default partion? you have understood now Look my CABP in the post precedent I think the problem is the boot you have in the RAID volume, r700 isn't able to boot Lion. When you detach it, boot from Lion volume is used. Link to comment Share on other sites More sharing options...
Recommended Posts