ZiGOMATiK Posted April 20, 2011 Share Posted April 20, 2011 Hello ! I try to install a retail version of OSX (10.6) using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] but everything is not fully compatible. I have a HP Elitebook 8540p laptop and I use a topic on another forum as support but I have a mysterious bug. The installation happens successfully and when I try to boot on OSX I have just a black screen with my cursor pointer. However, everything works I think because I hear the song of the introduction music after an installation of OSX (but no screen, always black). I try to boot with -x flag and it's successfully but i have a bad resolution but it's weird. In the settings it tells me that the resolution is 1600x900 (it's normal, same thing under Windows or Ubuntu) but I can't see the dock down on my screen. In fact, I can see just a "square"of the real screen (the upper left corner). I don't have any idea to fix this issue. (It's weird because people in the topic posted before, doesn't have this problem) Here is some things about my laptop : Intel Core i5 320M nVIDIA NVS 5100M 4Gb RAM Thank you in advance for your help ! zigomatik Link to comment Share on other sites More sharing options...
ZiGOMATiK Posted April 21, 2011 Author Share Posted April 21, 2011 Up ? Link to comment Share on other sites More sharing options...
Ritz Carltn Posted August 7, 2012 Share Posted August 7, 2012 I installed Lion(10.7) and Mountain Lion(10.8) DP1 working great! But, I need more time to install 10.7.4 or 10.8 GM.caused by Graphic Card. Link to comment Share on other sites More sharing options...
Ritz Carltn Posted January 16, 2013 Share Posted January 16, 2013 I Installed 10.8.2(12C60) with Clover BootLoader. it sometimes boot with Clover, by space in GUI and boot 64 with kext. But, it also boot safe mode. http://www.mediafire...tc54946g4uuus9k You can use USB memory Stick as followings. - http://www.osx86.net...&id=2571&page=4 Link to comment Share on other sites More sharing options...
Ritz Carltn Posted January 22, 2013 Share Posted January 22, 2013 Yea, main root cause is Custom EDID, I think. I'll posting further more in here. Link to comment Share on other sites More sharing options...
Ritz Carltn Posted January 27, 2013 Share Posted January 27, 2013 You need add EDID followings in config.plist for 10.8.2 with Clover BootLoader. Time: 오전 4:33:33 Date: 2013년 1월 27일 일요일 EDID Manager Version: 1.0.0.14 ___________________________________________________________________ Block 0 (EDID Base Block), Bytes 0 - 127, 128 BYTES OF EDID CODE: 0 1 2 3 4 5 6 7 8 9 000 | 00 FF FF FF FF FF FF 00 30 E4 010 | 7D 02 00 00 00 00 00 13 01 03 020 | 80 22 13 78 0A 4E 85 9E 5B 55 030 | 95 26 18 50 54 00 00 00 01 01 040 | 01 01 01 01 01 01 01 01 01 01 050 | 01 01 01 01 12 1B 56 78 50 00 060 | 0E 30 20 20 24 00 58 C2 10 00 070 | 00 19 00 00 00 00 00 00 00 00 080 | 00 00 00 00 00 00 00 00 00 00 090 | 12 1B 56 78 50 00 CB 31 20 20 100 | 24 00 35 AE 10 00 00 19 00 00 110 | 00 FC 00 4C 50 31 35 36 57 48 120 | 32 2D 54 4C 52 32 00 40 (8-9) ID Manufacture Name : LGD (10-11) ID Product Code : 027D (12-15) ID Serial Number : 0 (16) Week of Manufacture : 0 (17) Year of Manufacture : 2009 (18) EDID Version Number : 1 (19) EDID Revision Number: 3 (20) Video Input Definition : Digital (21) Maximum Horizontal Image Size: 34 cm (22) Maximum Vertical Image Size : 19 cm (23) Display Gamma : 2.20 (24) Power Management and Supported Feature(s): RGB Color, Non-sRGB, Preferred Timing Mode (25-34) Color Characteristics Red Chromaticity : Rx = 0.618 Ry = 0.352 Green Chromaticity : Gx = 0.331 Gy = 0.580 Blue Chromaticity : Bx = 0.150 By = 0.094 Default White Point: Wx = 0.313 Wy = 0.329 (35) Established Timings I (Not Used) (36) Established Timings II (Not Used) (37) Manufacturer's Timings (Not Used) (38-53) Standard Timings (Not Used) (54-71) Detailed Descriptor #1: Preferred Detailed Timing (1366x768 @ 60Hz) Pixel Clock : 69.3 MHz Horizontal Image Size : 344 mm Vertical Image Size : 194 mm Refresh Mode : Non-interlaced Normal Display, No Stereo Horizontal: Active Time : 1366 Pixels Blanking Time : 120 Pixels Sync Offset : 32 Pixels Sync Pulse Width: 32 Pixels Border : 0 Pixels Frequency : 46 kHz Vertical: Active Time : 768 Lines Blanking Time : 14 Lines Sync Offset : 2 Lines Sync Pulse Width: 4 Lines Border : 0 Lines Digital Separate, Horizontal Polarity (-), Vertical Polarity (-) Modeline: "1366x768" 69.300 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (72-89) Detailed Descriptor #2: Defined by Manufacturer (90-107) Detailed Descriptor #3: Detailed Timing (1366x768 @ 38Hz) Pixel Clock : 69.3 MHz Horizontal Image Size : 309 mm Vertical Image Size : 174 mm Refresh Mode : Non-interlaced Normal Display, No Stereo Horizontal: Active Time : 1366 Pixels Blanking Time : 120 Pixels Sync Offset : 32 Pixels Sync Pulse Width: 32 Pixels Border : 0 Pixels Frequency : 46 kHz Vertical: Active Time : 768 Lines Blanking Time : 459 Lines Sync Offset : 2 Lines Sync Pulse Width: 4 Lines Border : 0 Lines Digital Separate, Horizontal Polarity (-), Vertical Polarity (-) Modeline: "1366x768" 69.300 1366 1398 1430 1486 768 770 774 1227 -hsync -vsync (108-125) Detailed Descriptor #4: Monitor Name Monitor Name: LP156WH2-TLR2 (126-127) Extension Flag and Checksum Extension Block(s) : 0 Checksum Value : 64 ___________________________________________________________________ System Information Summary: Processor : Intel® Core™ i7 CPU Q 820 @ 1.73GHz Operating System : Microsoft Windows 7 Ultimate K OS Version : 6.1.7601 Service Pack : 1.0 Video Controler: Device ID : VideoController1 Name : NVIDIA NVS 5100M Adapter Compatibility: NVIDIA Video Processor : NVS 5100M Video RAM : 1.00 GB (1,073,741,824 Bytes) Availability : Running or Full Power Driver Version : 8.17.12.7621 PNP Device ID : PCI\VEN_10DE&DEV_0A2C&SUBSYS_1521103C&REV_A2\4&C64103&0&0018 Resolution : 1366x768 Max Refresh Rate : 59 Hz Min Refresh Rate : 38 Hz Current Refresh Rate : 59 Hz Current Scan Mode : None-Interlaced Status : OK Link to comment Share on other sites More sharing options...
Recommended Posts