^Andy^ Posted November 9, 2011 Share Posted November 9, 2011 thanks for your quick response ... now reinstalled everything from 0 ... and upgrade to 10.6.8 but not still appears to 1920x1080 resolution on the about this mac does not come out like a 6xxx ATI but something like NI40 and now that I did not tell me yes if you set the Enables graphics part of going to notice and use the andybootcd 5 I think it has the latest version of Chameleon or No? How is your monitor connected? Link to comment Share on other sites More sharing options...
nikomelzer Posted November 9, 2011 Share Posted November 9, 2011 How is your monitor connected? Via VGA Cable with 1 adapter to HDMI my card have 2 HDMI ouputs Link to comment Share on other sites More sharing options...
^Andy^ Posted November 9, 2011 Share Posted November 9, 2011 Via VGA Cable with 1 adapter to HDMI my card have 2 HDMI ouputs If you are using dvi->vga then you will need to use a different framebuffer - try Ipomoea Link to comment Share on other sites More sharing options...
nikomelzer Posted November 9, 2011 Share Posted November 9, 2011 If you are using dvi->vga then you will need to use a different framebuffer - try Ipomoea My card has only 2 DVI output and the input of my monitors are VGA so i use 2 DVI to VGA Adapters. where I configure the framebuffer thanks for your patience ANDY! Link to comment Share on other sites More sharing options...
nikomelzer Posted November 9, 2011 Share Posted November 9, 2011 My card has only 2 DVI output and the input of my monitors are VGA so i use 2 DVI to VGA Adapters. where I configure the framebuffer thanks for your patience ANDY! And if I make an update to chimera?? I'm not going to solve my problem?? Link to comment Share on other sites More sharing options...
^Andy^ Posted November 10, 2011 Share Posted November 10, 2011 My card has only 2 DVI output and the input of my monitors are VGA so i use 2 DVI to VGA Adapters. where I configure the framebuffer thanks for your patience ANDY! Try AtiConfig=Elodea as a bootflag I seriously dont think you are going to get both dvi ports working though. Link to comment Share on other sites More sharing options...
nikomelzer Posted November 10, 2011 Share Posted November 10, 2011 Try AtiConfig=Elodea as a bootflag I seriously dont think you are going to get both dvi ports working though. I'll try thanks andy Link to comment Share on other sites More sharing options...
psxdadz Posted November 10, 2011 Share Posted November 10, 2011 Hi ^Andy^, I'm proudly user of SL 10.6.8 on my P8P67 Pro B3 3.0 version + i5-2500K. ¡¡ Lot of Thanks !! My girlfriend just gift me the Magic Trackpad, and I'm having some issues to make it work. I think that is recognized as a Mighty Mouse, and i cant use any multi-gesture, even two fingers scroll, or 1 touck to click, 2 fingers touch to alt-click... Anyone is having same issues with MagicTrackpad or MagicMouse via integrated Bluetooth ??? Is there any solution to make it work right? Thanks in advance and sorry for my bad english. yes i bought a cheap blue tooth dongle and now works perfect Link to comment Share on other sites More sharing options...
^Andy^ Posted November 10, 2011 Share Posted November 10, 2011 yes i bought a cheap blue tooth dongle and now works perfect Care to share which dongle you bought so others may benefit? Link to comment Share on other sites More sharing options...
The Sheki Posted November 19, 2011 Share Posted November 19, 2011 Trying to install on ASUS P8P67 EVO. I assume the DVDRW (ASUS DRW-24B3ST) drivers are not on the boot CD because Chameleon Bootloader will not load and I get error : MSCD001. If I change the boot device to my USB Sony DVDRW (DVD RW DRU-700A VY04) then Chameleon Bootloader loads (all DOS) with the final command prompt: [DR-D05] A:\> This is as far as I can get. I have restored BIOS to default settings, and SATA is indeed AHCI. What do I need to do??? Link to comment Share on other sites More sharing options...
^Andy^ Posted November 21, 2011 Share Posted November 21, 2011 Trying to install on ASUS P8P67 EVO. I assume the DVDRW (ASUS DRW-24B3ST) drivers are not on the boot CD because Chameleon Bootloader will not load and I get error : MSCD001. If I change the boot device to my USB Sony DVDRW (DVD RW DRU-700A VY04) then Chameleon Bootloader loads (all DOS) with the final command prompt: [DR-D05] A:\> This is as far as I can get. I have restored BIOS to default settings, and SATA is indeed AHCI. What do I need to do??? Erm it looks like you are actually booting from a floppy disk? Link to comment Share on other sites More sharing options...
cd2573 Posted November 24, 2011 Share Posted November 24, 2011 Erm it looks like you are actually booting from a floppy disk? andy followed your instructions to a T and still have no sound please help the speaker is grayed out.....tjis is my first hackintosh ever and dont know anything at all about a MAC Link to comment Share on other sites More sharing options...
^Andy^ Posted November 24, 2011 Share Posted November 24, 2011 andy followed your instructions to a T and still have no sound please help the speaker is grayed out.....tjis is my first hackintosh ever and dont know anything at all about a MAC Try just re running the package Link to comment Share on other sites More sharing options...
cd2573 Posted November 24, 2011 Share Posted November 24, 2011 Try just re running the package I did re run both cd's #4 and #5 still no volume at all the speaker on the top is grayed out....does this have to do anything with updating it after I install snow Link to comment Share on other sites More sharing options...
^Andy^ Posted November 24, 2011 Share Posted November 24, 2011 I did re run both cd's #4 and #5 still no volume at all the speaker on the top is grayed out....does this have to do anything with updating it after I install snow If you have run a version update since installing the package then yes you will need to run the package again after installing it. Link to comment Share on other sites More sharing options...
cd2573 Posted November 24, 2011 Share Posted November 24, 2011 If you have run a version update since installing the package then yes you will need to run the package again after installing it. andy just ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and got sound and man this monitor looks good thanks for the help....bought lion and was reading your instructions but being the first time ever I use a mac dont understand how to do it..... also what keyboard and mouse do you recommend for me to buy? Link to comment Share on other sites More sharing options...
tayshun12 Posted November 24, 2011 Share Posted November 24, 2011 Is there any way I can put andyboot cd image onto a usb drive? I dont have a disk drive in my pc :/ It can be done but needs to be done from within os x so it's catch 22 How would I got about doing this on a mac? Link to comment Share on other sites More sharing options...
^Andy^ Posted November 28, 2011 Share Posted November 28, 2011 Is there any way I can put andyboot cd image onto a usb drive? I dont have a disk drive in my pc :/ QUOTE (^Andy^ @ May 23 2011, 02:09 PM) It can be done but needs to be done from within os x so it's catch 22 How would I got about doing this on a mac? Without an optical drive at all thats going to be tricky because the easiest way would be to burn the cd, create an image of it, restore the image to a usb drive and then install chameleon to the usb drive to ensure that its bootable. Have to confess i have not tried this but it I believe it should work. I did a similar thing with my retail snow leopard dvd, created an image, restored that image to usb, ran the P8P67 Pro package against the usb stick and finally copied over the extra folder from the boot cd to the usb drive. This gave me a handy little emergency boot stick plus self contained usb installer for snow leopard. Link to comment Share on other sites More sharing options...
psxdadz Posted December 17, 2011 Share Posted December 17, 2011 Andy wonder if any one can help, just bought a dell 27inch monitor the one with the high res connected first time the display was amazing, you have to use the dual dvi cable for the super high res.Problem when you restart you loose picture and you have to disconnect the cable and plug it back in then all is good obviously you can't keep doing this. when you use hdmi all works well but you only get 1080 res not the 1440 any ideas.....not the graphics card as the monitor works perfect when using windows 7 i7 8 gig mem ati 5770 asus p8p67 Link to comment Share on other sites More sharing options...
Brisc0 Posted December 17, 2011 Share Posted December 17, 2011 Andy wonder if any one can help, just bought a dell 27inch monitor the one with the high res connected first time the display was amazing, you have to use the dual dvi cable for the super high res.Problem when you restart you loose picture and you have to disconnect the cable and plug it back in then all is good obviously you can't keep doing this. when you use hdmi all works well but you only get 1080 res not the 1440 any ideas.....not the graphics card as the monitor works perfect when using windows 7 i7 8 gig mem ati 5770 asus p8p67 Plug another cable into the video card at the same time. ie use hdmi and ddvi together and see if it works. Try several combos, has worked for me in the past. Link to comment Share on other sites More sharing options...
dekz Posted January 6, 2012 Share Posted January 6, 2012 i have 1 blank dvd, an 8gb usb stick and a ntfs HDD, is it possible? lol Link to comment Share on other sites More sharing options...
^Andy^ Posted January 6, 2012 Share Posted January 6, 2012 i have 1 blank dvd, an 8gb usb stick and a ntfs HDD, is it possible? lol No you also need a computer, keyboard, mouse and a monitor Link to comment Share on other sites More sharing options...
dekz Posted January 6, 2012 Share Posted January 6, 2012 lmfao No you also need a computer, keyboard, mouse and a monitor lmfao, u know what i meant! burned iatkos bs with my 2nd last dvd and cant get it to work... is p8p67 deluxe ok with this guide and tools btw? maybe burn your bootcd to my last dvd and put osx on the usb stick... Link to comment Share on other sites More sharing options...
^Andy^ Posted January 6, 2012 Share Posted January 6, 2012 lmfao lmfao, u know what i meant! burned iatkos bs with my 2nd last dvd and cant get it to work... is p8p67 deluxe ok with this guide and tools btw? maybe burn your bootcd to my last dvd and put osx on the usb stick... Should work for basic install with a deluxe board - you may have to read back through the thread for audio or lan tweaks though (my brain is rusty so I cant remember the differences between all the various P8P67 boards). Link to comment Share on other sites More sharing options...
dekz Posted January 7, 2012 Share Posted January 7, 2012 you think your bootcd will find the osx installer on a usb stick? if i eject the cd and insert the usb.... will it find it? i could give you device ids and hardware specs for a deluxe motherboard and give it a run so you could have files for deluxe if u want. only difference is i got an nvidia card. Link to comment Share on other sites More sharing options...
Recommended Posts