c0ke Posted February 23, 2012 Share Posted February 23, 2012 Ok, I've read again crazybirdy's updated guide here. I think you can either use the bootloader he attached instead of the one I used that time: Chameleon_2.1svn_r1618_trunk_Peregrine_NB_pkg.zip I think it's better since it is an installer. It's the same one I use now in lion. Now if you say that the system's hanged, not only the display, you must try to understand what's wrong. Maybe nothing concerning the graphic card. bootup in verbose and report where it hangs and eventually KP. Link to comment Share on other sites More sharing options...
dajerm119 Posted February 23, 2012 Share Posted February 23, 2012 The picture in post 638 shows where it hang. I will try that bootloader again and see what I get. Otherwise I will try and figure out where and why it is hanging. Thank you. im sorry this is where it hangs This is where im guessing it KPs? Link to comment Share on other sites More sharing options...
c0ke Posted February 23, 2012 Share Posted February 23, 2012 The pic in post #638 doesn't show any kp and seems osx is up. In this case it should be able to run ks.command. Anyway you did some other modifies since that pic, so I'm pretty sure the verbose level messages are different now. If you still obtain the same errors with atiframebuffer after the last mod to that ati kext it means that the file is still corrupted. If you get there without kp and cannot hear sound from volume keys nor open the cd nor shut down maybe also the input and/or sound drivers aren't ok. I would try anyway with an external usb keyboard and a VGA display and see what happens. I'm sorry you can't still get to the point. I think there is not too much else I can do to help you. Let us know. Link to comment Share on other sites More sharing options...
kizwan Posted February 23, 2012 Share Posted February 23, 2012 Hi c0ke & dajerm119, I think better start from fresh 10.6.7. The ATIFramebuffer.kext failed to load problem, look like it's not the correct ATIFramebuffer.kext for 10.6.7. @dajerm119, Please list all kexts in /Extra folder. Also make sure all Extra Extension must installed in:- /Extra not in other directory. Link to comment Share on other sites More sharing options...
dajerm119 Posted February 23, 2012 Share Posted February 23, 2012 @cOke: thank you so much for your time and effort. I really appreciate your patience and willingness to help. I may just try a fresh install and go from there. Thank you to everyone else how has helped as well. I will let you know if anything happens. The only kext in /Extra are Extensions.bak.mkext and Extensions.mkext "Also make sure all Extra Extension must installed in /Extra." I'm not sure I understand, are there supposed to be more kexts in here? Link to comment Share on other sites More sharing options...
kizwan Posted February 23, 2012 Share Posted February 23, 2012 You don't know what kexts in Extensions.mkext? You can *decompressed* Extensions.mkext to *.kext files. I'm not on Mac right now, I don't remember the exact kextcache command. I'll let you know when I'm on Mac later. Link to comment Share on other sites More sharing options...
c0ke Posted February 23, 2012 Share Posted February 23, 2012 I don't see any kp in your pics.. Only atiframebuffer issue. So kextstat.txt should be saved in your home directory and should be useful to see if all other needed ati kext are loaded. I agree again with kizwan, ati kexts corrupted maybe. You could extract the clean ones from an osx update maybe 10.6.6 and 10.6.7 should have same ati kexts. Link to comment Share on other sites More sharing options...
dajerm119 Posted February 23, 2012 Share Posted February 23, 2012 Sorry like I said I'm new pretty new to Mac I didn't know it was a compressed file. I'll check it out after i get home. Link to comment Share on other sites More sharing options...
dajerm119 Posted February 23, 2012 Share Posted February 23, 2012 @ cOke: I tried the kextstat yesterday and it would not boot far enough to even run the start up options. @kizwan: I tried unpacking Extensions.mkext in Kext Utility and it told me " ... /n Sorry, could not unpack " "/Extra/Extension.mkext"" Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted February 24, 2012 Share Posted February 24, 2012 try Kext Wizard Link to comment Share on other sites More sharing options...
dajerm119 Posted February 25, 2012 Share Posted February 25, 2012 @Lordadmiral Drake: thank you, Kext Wizard did the trick. @kizwan: Unfortunately there is only one kext, AppleACPIPS2NUB.kext. The same kext is also in my System/Extension folder. I tried removing it but it still does the same thing. Link to comment Share on other sites More sharing options...
dajerm119 Posted February 27, 2012 Share Posted February 27, 2012 I tried again this time with a fresh instal of OS X and extracted fresh kexts from 10.6.7 then modified them for my needs. All kexts are loading except the ATIFrambuffer.kext. I have, unfortunately, run out of time. My business is starting to pick back up and I no longer have time to mess with this. I would like to thank everyone who helped me, I am sorry I could not get this to work on my machine. Thank you again and If I decide to try again and have any success I will let everyone know. Link to comment Share on other sites More sharing options...
kizwan Posted February 27, 2012 Share Posted February 27, 2012 I'm sorry can't help you more since I'm also don't have much time for this project. Link to comment Share on other sites More sharing options...
LesGaR Posted February 28, 2012 Share Posted February 28, 2012 Hello, i have Asus N52JU with Ati 6370m, is same 5470m but rebranded. Now can activate it from chameleon, use ati5000enabler and override edit of my lvds. But the problem is i don´t know how fix framebufer. Can you help me? When boot have black screen but i've change monitor Ati card work, but only half screen. I attached all information i think you need for help me: ioreg with framebufer loaded, bios dump, vanilla next (7.1.8 from Lion 10.7.3), enabler I used ... Please help me because is the last piece of hardware i need for 100% hackintosh, (now work USB, card reader, webcam, wifi, ...) Thanks for you time. http://db.tt/9dpWtEvH Link to comment Share on other sites More sharing options...
Francesco Diaz Posted February 29, 2012 Share Posted February 29, 2012 I don't understand what I could do... . Anyone could help me? I have a mobility radeon 4650 Link to comment Share on other sites More sharing options...
Francesco Diaz Posted March 2, 2012 Share Posted March 2, 2012 please help , I can't boot with osx 10.6.6 on a pavilion dv6 2120 es, with amd x2 turion, mobility radeon 4650 and 4 gb ram ...., device in slot --1 Link to comment Share on other sites More sharing options...
crazybirdy Posted March 3, 2012 Share Posted March 3, 2012 please help , I can't boot with osx 10.6.6 on a pavilion dv6 2120 es, with amd x2 turion, mobility radeon 4650 and 4 gb ram ...., device in slot --1 Remove all the ATI kext as /System/Library/Extensions/ATI****.**** . And install driver kext with pkg+kext. Link to comment Share on other sites More sharing options...
Francesco Diaz Posted March 3, 2012 Share Posted March 3, 2012 Remove all the ATI kext as /System/Library/Extensions/ATI****.**** . And install driver kext with pkg+kext. But,Is this for mobiity radeon 4330 ? mhhh Link to comment Share on other sites More sharing options...
Francesco Diaz Posted March 3, 2012 Share Posted March 3, 2012 Thanks, thanks , finally my gpu works correctly Link to comment Share on other sites More sharing options...
Jadar Posted March 17, 2012 Share Posted March 17, 2012 Hey guys, I've posted this in bcc9's thread, but maybe here is better... I have a Radeon HD 4550, and on Lion 10.7.3. I've managed to enable full resolution, QE/CI, and the DVD Player works. Here comes the problem... I can't seem to use things like Portal 2, or Minecraft. I can start them up, but when I try to play the whole computer freezes up, but I can move the mouse. The only way to get out of it is to hard reboot. I've tried so many different Transmitter/Encoder/Hotplug/SenseID, and nothing helps. Here is my dump from bcc9's tool: ATOM BIOS Rom: SubsystemVendorID: 0x1458 SubsystemID: 0x21ae IOBaseAddress: 0xee00 Filename: R455D39I.F61 BIOS Bootup Message: GV-R455D3-512I/F61 PCI ID: 1002:9540 Connector at index 0 Type [@offset 44660]: VGA (1) Encoder [@offset 44664]: INTERNAL_KLDSCP_DAC2 (0x16) i2cid [@offset 44732]: 0x91, OSX senseid: 0x2 Connector at index 1 Type [@offset 44670]: HDMI-A (11) Encoder [@offset 44674]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 44755]: 0x90, OSX senseid: 0x1 Connector at index 2 Type [@offset 44680]: DVI-I (2) Encoder [@offset 44684]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 44784]: 0x94, OSX senseid: 0x5 Connector at index 3 Type [@offset 44690]: DVI-I (2) Encoder [@offset 44694]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 44784]: 0x94, OSX senseid: 0x5 and from redsock_bios_decode: R455D39I.F61: GV-R455D3-512I/F61 Subsystem Vendor ID: 1458 Subsystem ID: 21ae Object Header Structure Size: 235 Connector Object Table Offset: 3c Router Object Table Offset: 0 Encoder Object Table Offset: af Display Path Table Offset: 10 Connector Object Id [5] which is [VGA] encoder obj id [0x16] which is [iNTERNAL_KLDSCP_DAC2] linkb: false Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x1e] which is [iNTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x15] which is [iNTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Here is the personality that matches my DVI-I, and VGA correctly: 1000 0000 1000 0000 0000 0000 0101 0002 0008 0000 0002 0000 0001 0000 1001 0101 0400 0000 0402 0000 0000 0000 1204 0205 This matched my DVI, VGA, but when I use a HDMI to DVI cable the screen is all garbled with colors.. On DVI, I can start Minecraft, go to the menu, but when I click play it freezes up the computer. Same with Portal 2... The weird thing is that DVD Player works, except I haven't played a DVD for more that 2 minutes.. Now when my DVI is plugged in, but not HDMI, HDMI shows on port2 where DVI should be. I've tried a lot of different values, and haven't gotten HDMI to even display properly... I'm kind of stuck. One thing is that maybe ATI4600Controller doesn't properly work with my card, as I have out my device ID into it. Anyone have any ideas? I've also attached the output from RadeonHD.kext to the end of the post. Thanks! RadeonDump.txt Link to comment Share on other sites More sharing options...
lvs1974 Posted March 22, 2012 Share Posted March 22, 2012 Hey guys! I came across with a weird problem: I can't get detailed connection info from my bios (ATI Mobility Radeon x1700, dev_id = 71DE). My results: ./radeon_bios_decode < /Extra/1002_71DE.rom ATOM BIOS Rom: SubsystemVendorID: 0x1043 SubsystemID: 0x14e3 IOBaseAddress: 0xa000 Filename: f3s0122.m66 BIOS Bootup Message: ASUS F3S M66M ATOM BIOS ASID:A14201.006$ PCI ID: 1002:71de Connector at index 0 type: VGA Connector at index 1 type: LVDS Connector at index 2 type: Composite Connector at index 3 type: DVI-I ./redsock_bios_decoder < /Extra/1002_71DE.rom f3s0122.m66 : ASUS F3S M66M ATOM BIOS ASID:A14201.006$ Subsystem Vendor ID: 1043 Subsystem ID: 14e3 Object Header Structure Size: 43605 Connector Object Table Offset: 0 Router Object Table Offset: 0 Encoder Object Table Offset: 0 Display Path Table Offset: 0 Connector Object Id [0] which is [NONE] Connector Object Id [0] which is [NONE] Connector Object Id [0] which is [NONE] Connector Object Id [0] which is [NONE] Connector Object Id [0] which is [NONE] Connector Object Id [0] which is [NONE] Connector Object Id [0] which is [NONE] Connector Object Id [0] which is [NONE] ./RadeonDump -i Skipping TV-Out Bios Connector table: Port1: DDCType-0x7e50, DACType-7, TMDSType-0, ConnectorType-0, hpd_mask-0x0 Port3: DDCType-0x7e60, DACType-1, TMDSType-1, ConnectorType-0, hpd_mask-0x1 EDID for connector 0: Read data failed EDID for connector 1: Read data failed EDID for connector 3: Read data failed RaBit.exe: -- Analyzing ROM BIOS -- HEADER offs: 0x216 PCIR struct offs: 0x23C DATA offs: 0xB35A, 76 entries MASTER offs: 0xB3F2, 34 entries CRC table offs: 0x261 CLOCK table offs: 0xB8FA Core clock is 430.00 (0.00 3D) MHz Memory clock is 400.00 MHz Reference clock is 27.00 MHz Connectors Layout table offs: 0xB9F4 Port = 0, Conn0 type = VGA Port = 0, Conn2 type = STV So, there's no way to get senseid for me and I can't patch ATI1600Controller to get my internal LVDS working! Could anybody help me please? Thank you in advance! 1002_71DE.rom.zip kernel.log.zip RaBiT.log.zip Link to comment Share on other sites More sharing options...
foxyhell86 Posted March 24, 2012 Share Posted March 24, 2012 HI guys, Thanks to crazybird's new method, I was able to get QE/CI on my Ati Mobility Radeon 5145 using ATY_init for 4570. Note that 5145 is just a rename of 4570, only slightly higher and i tried the actual 5145 ATY_init but it gave me the black & white distorted screen. If i just use chameleons bootloader w/ GraphicsEnabler=Yes, it always gives me the device pci-1 hang up even w/ my compiled chameleon boot loader (adding my device on ati_c), results still the same. So ATY_init worked for me. Have the green apple when on translucent bar and the rippling effect when adding widgets. My only problem is i couldn't stream videos online. Running on 64 mode(-force 64 arch=i386), Safari will crash when I try to play video ads on Apple site. On Youtube, it plays but really fast, thus it gets distorted. It's not much but I have 6 mpbs Internet connection, and I'm pretty sure that's enough for streaming especially on YouTube like back in Windows. Besides, I see the video already loaded completely but it's still saying buffering or sometimes it plays but in slow motion.lol. Here's what I've tried: 1. Booted w/ only arch=i386, Apple video ads won't crash anymore but still distorted, same on Youtube (Safari, firefox, Opera). 2. Opted out of HTML5 so all browsers will use Adobe flash plugin, same distorted results 3. Unchecked graphics acceleration on the flash plugin settings (which shouldn't be the case coz my graphics is supposed to be working), same results. 4. Downgraded my flash player coz I read that Safari users had this problem before and downgrading flash solved it, however, same results. So if someone could please clarify this for me. Is it because of the framebuffer or not related at all? I'm still experimenting on how to make shrike work on my lappy. While doing that, just want to make sure that it is indeed the problem even though I have QE/CI now. Or is there something on my E/E folder that's causing that? I didn't want to delete any coz most of them were installed by default by Nawcom's Mod except w/ the kext with *. On my E/E: *AnyCardReader.kext AppleACPIPS2Nub.kext ApplePS2Controller.kext AtherosWifiInjector.kext *ElliotForceLegacyRTC.kext EvilAppleACPIPLatform.kext EvilIOPCIFamily.kext *Ev0reboot.kext fakesmc.kext IOAHCIBlockStorage.kext IONetworkingFamily.kext TotallyFixStillWaiting.kext VodooBattery.kext On S/L/E that I injected: VodooHDA Aty_init I'm running SL 10.6.8 and my specs is in my signature. I don't know much about graphics but here's what's in my system right now Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted March 28, 2012 Share Posted March 28, 2012 Just out of curiosity: Does ATY_Init.kext take care of DSDT dual-link patching? Because I just removed the patch code from my dsdt for a test and still get output on internal LVDS at 1600x900. There is no change in output though, still distorted. I noticed though that (with and without patch) it appears that every second pixel column is plain white. Could it be that I had inserted the patch improperly in the first place? Link to comment Share on other sites More sharing options...
crazybirdy Posted April 3, 2012 Share Posted April 3, 2012 HI guys, Thanks to crazybird's new method, I was able to get QE/CI on my Ati Mobility Radeon 5145 using ATY_init for 4570. Note that 5145 is just a rename of 4570, only slightly higher and i tried the actual 5145 ATY_init but it gave me the black & white distorted screen. If i just use chameleons bootloader w/ GraphicsEnabler=Yes, it always gives me the device pci-1 hang up even w/ my compiled chameleon boot loader (adding my device on ati_c), results still the same. So ATY_init worked for me. So if someone could please clarify this for me. Is it because of the framebuffer or not related at all? I'm still experimenting on how to make shrike work on my lappy. While doing that, just want to make sure that it is indeed the problem even though I have QE/CI now. Or is there something on my E/E folder that's causing that? I didn't want to delete any coz most of them were installed by default by Nawcom's Mod except w/ the kext with *. Old method, better than New method 10.7.x VGA + DVD Player + MS Office ppt work, Chess doesn't work. 10.6.8 VGA + DVD Player + MS Office ppt + Chess work. Link to comment Share on other sites More sharing options...
Helghast59 Posted April 3, 2012 Share Posted April 3, 2012 Old method, better than New method 10.7.x VGA + DVD Player + MS Office ppt work, Chess doesn't work. 10.6.8 VGA + DVD Player + MS Office ppt + Chess work. So it's Lion problem? I try 3 different methods, but same problem with chess and games. Link to comment Share on other sites More sharing options...
Recommended Posts