audiodriverwriter Posted January 18, 2009 Share Posted January 18, 2009 Hi Audiodriverwriter, thx for your reply. I use the Juli@. I have to say... You did a really great job. But i need this two features and you are the only one who can do this and make the driver perfect. please please help me.. Regarding input gain: the Juli@'s codecs don't have input gain controls, so they won't be available. They just can not be implemented, since they are not there. One thing that bugs me a little I'm sure someone must of already mentioned this but it's showing as 12ins/10 outs. Is there the possibility in the future of maybe choosing what card you got in the installer and not only installing it under the right name but right number of in/outs for that card?? Just an idea Keep up the good work The driver detects which card it is, but unfortunately the chip always has to use 12/10 channels. Because of the way Core Audio works, I can not simply pass a buffer with less channels to Core Audio. So I hope you can live with this, since any attempt to fix this will cause added latency and performance. Another thank you, and a small question - is input working on my 2496? 'Cause I can't check it now... p.s. yeah donation is underway definitely Yes, analogue input is working on the 2496. The digital in and out don't work (yet), since it was much more complicated to support than I thought. The Envy24HT at least has an integrated digital out, which makes it very easy to support, unfortunately the Envy24 always requires an additional chip that must be programmed. Link to comment Share on other sites More sharing options...
b3rndtt0ast Posted January 18, 2009 Share Posted January 18, 2009 this may be a LONG stretch, and im not sure what i co do to help, but i have a Turtle Beach Catalina, its a Envy24HT-S card. i tried and failed to get the HT-s driver (as i have learned, the subvendorID) and i tried it again, and thats where it hangs on bootup. here is a link to the card in question. http://support.turtlebeach.com/site/kb_ftp/586.asp if there is anything you could do, i would greatly appreciate it! -Daniel Link to comment Share on other sites More sharing options...
b3rndtt0ast Posted January 18, 2009 Share Posted January 18, 2009 here is the info i pulled off it from windows... Envy24 Family Audio Controller WDM PCI\VEN_1412&DEV_1724&SUBSYS_17241412&REV_01 PCI\VEN_1412&DEV_1724&SUBSYS_17241412 PCI\VEN_1412&DEV_1724&CC_040100 PCI\VEN_1412&DEV_1724&CC_0401 under compatible Ids i have PCI\VEN_1412&DEV_1724&REV_01 PCI\VEN_1412&DEV_1724 PCI\VEN_1412&CC_040100 PCI\VEN_1412&CC_0401 PCI\VEN_1412 PCI\CC_040100 PCI\CC_0401 Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 18, 2009 Share Posted January 18, 2009 Sorry, the Turtle Beach will not be supported any time soon. Link to comment Share on other sites More sharing options...
xoroi Posted January 19, 2009 Share Posted January 19, 2009 Hi there! thank you for the driver. I have a Terratec Phase 22 which is working great but I cannot adjust the volume. In the preferences menu, the sound level option is greyed out, so I cannot adjust it. Any clues? Thank you! Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 19, 2009 Share Posted January 19, 2009 Hi there!thank you for the driver. I have a Terratec Phase 22 which is working great but I cannot adjust the volume. In the preferences menu, the sound level option is greyed out, so I cannot adjust it. Any clues? Thank you! Yes, I didn't implement volume yet for the Phase22. It's on my todo list! Link to comment Share on other sites More sharing options...
macuser123123123 Posted January 19, 2009 Share Posted January 19, 2009 Regarding input gain: the Juli@'s codecs don't have input gain controls, so they won't be available. They just can not be implemented, since they are not there. Hi, really no chance to get the gain control working ? Do you know the release Date of your new Juli@ driver and will be the midi function included?. What can i do to get Midi and Audio Input working ? I mean the apple drivers have both of the things working. and i think there are Linux Driver that work too!? thx4all. have a nice day. Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 19, 2009 Share Posted January 19, 2009 Hi, really no chance to get the gain control working ? Do you know the release Date of your new Juli@ driver and will be the midi function included?. What can i do to get Midi and Audio Input working ? I mean the apple drivers have both of the things working. and i think there are Linux Driver that work too!? thx4all. have a nice day. I'll repeat again: the Julia's codec does NOT have a gain control. If you don't believe me, look yourself: http://www.asahi-kasei.co.jp/akm/en/produc...k5358a_f02e.pdf If ESI made drivers for OSX PPC that included gain controls, you have been fooled thinking it was gain, when in reality it has been software based digital volume (which does no good to anyone). What can i do to get Midi and Audio Input working ? Well, audio input will just work and you'll have to wait a long while I'm afraid until I make a MIDI driver. I have some other stuff to do I'm afraid. Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 20, 2009 Share Posted January 20, 2009 Hi there!thank you for the driver. I have a Terratec Phase 22 which is working great but I cannot adjust the volume. In the preferences menu, the sound level option is greyed out, so I cannot adjust it. Any clues? Thank you! Envy24HT Version 0.5.0 adds input gain and volume controls to the Phase22. I may have messed up the Juli@ output controls in the process, please let me know if they still work! Link to comment Share on other sites More sharing options...
Andy Wilko Posted January 21, 2009 Share Posted January 21, 2009 hey audiodriverwriter, is this of any use to you to help on the Maya 44 mk3? Cheers, Andy esi_maya44_alsa_1.0.18rc3.diff.tar.gz Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 22, 2009 Share Posted January 22, 2009 hey audiodriverwriter, is this of any use to you to help on the Maya 44 mk3? Cheers, Andy Hey, Heh, now you can see for yourself what major work it is to support the Maya. And note that I can't just use the alsa code, it's GPL. But anyway, good to see that it is possible since they've done it, but it doesn't seem like something I can quickly add, so I won't do this any time soon, sorry. Link to comment Share on other sites More sharing options...
macuser123123123 Posted January 22, 2009 Share Posted January 22, 2009 Envy24HT Version 0.5.0 adds input gain and volume controls to the Phase22. I may have messed up the Juli@ output controls in the process, please let me know if they still work! Output Control is still working on Juli@. The new version 0.5.0... Is there anything new for Juli@ ? Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 22, 2009 Share Posted January 22, 2009 Output Control is still working on Juli@. Good to hear! The new version 0.5.0... Is there anything new for Juli@ ? No, it will take a while until something is going to be added for the Juli@ (that is digital in and MIDI). The analogue audio part is working. Link to comment Share on other sites More sharing options...
mikeveli20 Posted January 23, 2009 Share Posted January 23, 2009 I just finished installing iDeneb v1.3 10.5.5. Everything is working great so I put in my Audiophile 2496 and installed the latest drivers but when I go to my System Profiler and click on PCI Cards under the Hardware section, it tells me that "This computer does not appear to have any PCI cards installed". Anyone experience this before? Here are the specs for the rest of my computer: Intel DG31PR mATX LGA775 G31 DRR2 SATA Video Sound GBLAN Motherboard Intel Core 2 Duo E7300 Dual Core Processor LGA775 2.66GHZ 1066FSB 3MB Corsair XMS2 TWIN2X4096-6400C5 4GB DDR2 2X2GB PC2-6400 DDR2-800 CL 5-5-5-18 240PIN Memory ASUS EN8400GS SILENT/HTP/256M GeForce 8400GS 500MHZ 256MB DDR2 PCI-E VGA DVI HDTV Out Seagate Barracuda 7200.11 3.5IN 500GB SATA2 8.5MS 7200RPM 32MB Cache OCZ StealthXStream OCZ500SXS 500W ATX12V 24PIN Active PFC ATX Power Supply Not sure if any if that matters for this specific problem, but thought I'd post it anyways. Link to comment Share on other sites More sharing options...
madhias Posted January 23, 2009 Share Posted January 23, 2009 I just finished installing iDeneb v1.3 10.5.5. Everything is working great so I put in my Audiophile 2496 and installed the latest drivers but when I go to my System Profiler and click on PCI Cards under the Hardware section, it tells me that "This computer does not appear to have any PCI cards installed". Anyone experience this before? Here are the specs for the rest of my computer: Intel DG31PR mATX LGA775 G31 DRR2 SATA Video Sound GBLAN Motherboard Intel Core 2 Duo E7300 Dual Core Processor LGA775 2.66GHZ 1066FSB 3MB Corsair XMS2 TWIN2X4096-6400C5 4GB DDR2 2X2GB PC2-6400 DDR2-800 CL 5-5-5-18 240PIN Memory ASUS EN8400GS SILENT/HTP/256M GeForce 8400GS 500MHZ 256MB DDR2 PCI-E VGA DVI HDTV Out Seagate Barracuda 7200.11 3.5IN 500GB SATA2 8.5MS 7200RPM 32MB Cache OCZ StealthXStream OCZ500SXS 500W ATX12V 24PIN Active PFC ATX Power Supply Not sure if any if that matters for this specific problem, but thought I'd post it anyways. I never saw it there, but it works perfect. Maybe it`s just cosmetics there. Link to comment Share on other sites More sharing options...
mikeveli20 Posted January 23, 2009 Share Posted January 23, 2009 I never saw it there, but it works perfect. Maybe it`s just cosmetics there. I couldn't hear any sound coming out. I turned my speakers up all the way too. I'm using M-Audio Studiophile AV-30 speakers connected to the output of my Audiophile 2496 via an RCA cable. Link to comment Share on other sites More sharing options...
coffka Posted January 23, 2009 Share Posted January 23, 2009 Any possibility of supporting the Via Envy24? http://www.via.com.tw/en/products/audio/controllers/envy24/ It's onboard my Shuttle SN25P http://www.bit-tech.net/hardware/2005/06/13/shuttle_sn25p/1 Cheers! Link to comment Share on other sites More sharing options...
Aram Vartanian Posted January 23, 2009 Share Posted January 23, 2009 I couldn't hear any sound coming out. I turned my speakers up all the way too. I'm using M-Audio Studiophile AV-30 speakers connected to the input of my Audiophile 2496 via an RCA cable. I believe that you need to connect the speakers to the output first, than you need to setup the right output channel in Audio Midi Setup. Success! Link to comment Share on other sites More sharing options...
mikeveli20 Posted January 23, 2009 Share Posted January 23, 2009 I believe that you need to connect the speakers to the output first, than you need to setup the right output channel in Audio Midi Setup. Success! Yeah that was a typo. I just corrected it. Thanks. I'll try the Audio Midi Setup in the morning. If that does indeed work, then there should be no cause for alarm that it isn't showing up in my PCI devices? Link to comment Share on other sites More sharing options...
madhias Posted January 23, 2009 Share Posted January 23, 2009 Yeah that was a typo. I just corrected it. Thanks. I'll try the Audio Midi Setup in the morning. If that does indeed work, then there should be no cause for alarm that it isn't showing up in my PCI devices? I never saw it in the PCI devices, it isn`t there, but just in the Audio Setup. [EDIT] Btw, here is a thread how to see PCI devices in the system profiler. Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 23, 2009 Share Posted January 23, 2009 Any possibility of supporting the Via Envy24? http://www.via.com.tw/en/products/audio/controllers/envy24/ It's onboard my Shuttle SN25P http://www.bit-tech.net/hardware/2005/06/13/shuttle_sn25p/1 Cheers! The Via Envy24 is the same as the ICE (ICEnsemble). There is little chance that I'll make a driver for the shuttle though. Link to comment Share on other sites More sharing options...
macuser123123123 Posted January 23, 2009 Share Posted January 23, 2009 Good to hear! No, it will take a while until something is going to be added for the Juli@ (that is digital in and MIDI). The analogue audio part is working. Hi Audiodriverwriter, i have on question. Why does the original Juli@ driver not work. Other drivers like my Printer HL-2030 work with the original driver from the original mac disc. What is the difference?. Can you tell me ? thx4allyourwork Link to comment Share on other sites More sharing options...
audiodriverwriter Posted January 23, 2009 Share Posted January 23, 2009 Hi Audiodriverwriter, i have on question. Why does the original Juli@ driver not work. Other drivers like my Printer HL-2030 work with the original driver from the original mac disc. What is the difference?. Can you tell me ? thx4allyourwork The original driver is for PowerPC and won't work on Intel (even under emulation). Actually, I even think that the M-Audio control panel has a check coded into it, since the program itself says it is not running on the correct processor when started. Is that printer driver from a PowerPC mac disc or an Intel one? Link to comment Share on other sites More sharing options...
macuser123123123 Posted January 23, 2009 Share Posted January 23, 2009 The original driver is for PowerPC and won't work on Intel (even under emulation). Actually, I even think that the M-Audio control panel has a check coded into it, since the program itself says it is not running on the correct processor when started.Is that printer driver from a PowerPC mac disc or an Intel one? The Printer driver is from the Mac OS X Leopard 10.5.4 9E25 Retail Disc. Link to comment Share on other sites More sharing options...
mikeveli20 Posted January 23, 2009 Share Posted January 23, 2009 I never saw it in the PCI devices, it isn`t there, but just in the Audio Setup.[EDIT] Btw, here is a thread how to see PCI devices in the system profiler. Thanks to those who replied. It works now! I had to enable it as the Output source (it was currently set to the on-board audio). It still doesn't show in system profiler but I'll give that link a shot. Thanks again! Link to comment Share on other sites More sharing options...
Recommended Posts