DefKorns Posted May 5, 2011 Share Posted May 5, 2011 estes sao os kexts k tenho: /Extra/Extensions ahciportinjector fakesmc ioahciblockstorageinjector ad1988bfix jmicron36xata jmicron36xsata voodoosdhc /S/L/E/ applehda skge ionetworkingfamily e continuo sem sem. :S Link to comment Share on other sites More sharing options...
MaLd0n Posted May 5, 2011 Author Share Posted May 5, 2011 ahciportinjectorfakesmc ioahciblockstorageinjector ad1988bfix jmicron36xata jmicron36xsata voodoosdhc /S/L/E/ applehda skge ionetworkingfamily e continuo sem sem. :S ahciportinjector - essa sua placa tem AHCI? fakesmc - kext obrigatoria ioahciblockstorageinjector-resolve o problema HD interno com ícones "laranja" jmicron36xata e jmicron36xsata - a controladora é JMICRON? em s/l/e tem mais de 200 kexts use um HD de teste e não modifique nada, faça o procedimento citado no tópico, use o DSDT + a Legacy ad1988bfix esse audio tem de funcionar dessa forma pra Mavell Yukon 88E8056 use a legacy Tb LegacyAppleYukon2.kext.zip Link to comment Share on other sites More sharing options...
DefKorns Posted May 5, 2011 Share Posted May 5, 2011 sei k no SLE tem mtos kexts, eu apenas meti na lista os que mexi Link to comment Share on other sites More sharing options...
oldnapalm Posted May 5, 2011 Share Posted May 5, 2011 Faça um dump do codec de áudio no Linux (pode usar um live CD) cat /proc/asound/card0/codec#0 > codec.txt Dependendo da revisão a kext AD1988bFix pode não funcionar sem ajustes. Link to comment Share on other sites More sharing options...
DefKorns Posted May 5, 2011 Share Posted May 5, 2011 Faça um dump do codec de áudio no Linux (pode usar um live CD) cat /proc/asound/card0/codec#0 > codec.txt Dependendo da revisão a kext AD1988bFix pode não funcionar sem ajustes. Codec: Analog Devices AD1988B Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x11d4198b Subsystem Id: 0x104381f6 Revision Id: 0x100200 No Modem Function Group found Default PCM: rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Control: name="IEC958 Playback Source", index=0, device=0 Device: name="AD198x Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 3 samples Connection: 1 0x1d Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x27 0x27] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="AD198x Analog", type="Audio", device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x19 0x19] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 Node 0x07 [Audio Input] wcaps 0x130391: Stereo Digital Control: name="IEC958 Capture Switch", index=0, device=0 Control: name="IEC958 Capture Default", index=0, device=0 Device: name="AD198x Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 SDI-Select: 0 Digital: Validity Digital category: 0x0 PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Unsolicited: tag=00, enabled=0 Delay: 3 samples Connection: 1 0x1c Node 0x08 [Audio Input] wcaps 0x100501: Stereo Device: name="AD198x Analog", type="Audio", device=0 Converter: stream=0, channel=0 SDI-Select: 0 Power states: D0 D3 Power: setting=D0, actual=D0 Connection: 1 0x0c Node 0x09 [Audio Input] wcaps 0x100501: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power states: D0 D3 Power: setting=D0, actual=D0 Connection: 1 0x0d Node 0x0a [Audio Output] wcaps 0x405: Stereo Amp-Out Control: name="Side Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 Node 0x0b [Audio Selector] wcaps 0x300301: Stereo Digital Connection: 3 0x08* 0x09 0x0f Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Input Source", index=0, device=0 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0x2f 0x2f] Connection: 10 0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20 Node 0x0d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Capture Volume", index=1, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Capture Switch", index=1, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Input Source", index=1, device=0 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0xa7 0xa7] Connection: 10 0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20 Node 0x0e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Capture Volume", index=2, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Capture Switch", index=2, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Input Source", index=2, device=0 Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0xa7 0xa7] Connection: 10 0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20 Node 0x0f [Audio Input] wcaps 0x100501: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power states: D0 D3 Power: setting=D0, actual=D0 Connection: 1 0x0e Node 0x10 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x00] Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373f: IN OUT HP Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02214030: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x22 Node 0x12 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001373f: IN OUT HP EAPD Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 EAPD 0x0: Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x29 Node 0x13 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x00] Pincap 0x00000010: OUT Pin Default 0x511711f0: [N/A] Speaker at Int Rear Conn = Analog, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x2d Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373f: IN OUT HP Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19022: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x2 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x2b Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00013737: IN OUT EAPD Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 EAPD 0x0: Pin Default 0x01813021: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x2c Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00003737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01011012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x2a Node 0x17 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19020: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x26 Node 0x18 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x9933112e: [Fixed] CD at Int ATAPI Conn = ATAPI, Color = Black DefAssociation = 0x2, Sequence = 0xe Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x19 [Power Widget] wcaps 0x500500: Mono Power states: D0 D3 Power: setting=D0, actual=D0 Connection: 2 0x20 0x21 Node 0x1a [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x918711f0: [Fixed] Line In at Int Rear Conn = Analog, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1b [Pin Complex] wcaps 0x40030d: Stereo Digital Amp-Out Control: name="IEC958 Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="IEC958 Playback Source", index=0, device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=1 Amp-Out vals: [0x19 0x19] Pincap 0x00000010: OUT Pin Default 0x0145f1f0: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Other DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x1c [Pin Complex] wcaps 0x40020b: Stereo Digital Amp-In Control: name="IEC958 Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x41c5f1f0: [N/A] SPDIF In at Ext Rear Conn = Optical, Color = Other DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Audio Mixer] wcaps 0x200303: Stereo Digital Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x01 0x0b Node 0x1e [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x36 0x21 Node 0x1f [Volume Knob Widget] wcaps 0x600080: Mono Volume-Knob: delta=1, steps=63, direct=0, val=0 Unsolicited: tag=00, enabled=0 Connection: 0 Node 0x20 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="CD Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=6, ofs=0 Control: name="CD Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=6, ofs=0 Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 8 0x39 0x33 0x38 0x3d 0x34 0x3b 0x18 0x1a Node 0x21 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Analog Mix Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Analog Mix Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f] Connection: 1 0x20 Node 0x22 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x37 0x21 Node 0x23 [Vendor Defined Widget] wcaps 0xf00100: Mono Connection: 18 0x11* 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x24 0x25 0x38 0x39 0x3a 0x3b 0x3c 0x3d 0x20 0x21 Node 0x24 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01016011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x27 Node 0x25 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01012013: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x3 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x28 Node 0x26 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x32 0x21 Node 0x27 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x05 0x21 Node 0x28 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x0a 0x21 Node 0x29 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x21 Node 0x2a [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x06 0x21 Node 0x2b [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x30 0x21 Node 0x2c [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x31 0x21 Node 0x2d [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x1e Node 0x2e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x2f [Vendor Defined Widget] wcaps 0xf00100: Mono Connection: 6 0x11* 0x12 0x14 0x15 0x16 0x17 Node 0x30 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x03* 0x04 0x06 Node 0x31 [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x04* 0x0a Node 0x32 [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x05* 0x04 Node 0x33 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x3a* 0x25 0x24 Node 0x34 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x3c* 0x25 0x24 Node 0x35 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x36 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x03 0x04* 0x06 Node 0x37 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x03 0x04* 0x06 Node 0x38 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x11 Node 0x39 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x14 Node 0x3a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x15 Node 0x3b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x16 Node 0x3c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x17 Node 0x3d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x12 Link to comment Share on other sites More sharing options...
oldnapalm Posted May 6, 2011 Share Posted May 6, 2011 Aquela AD1988bFix como está não vai servir, precisa de alguns ajustes. Ela é para a revisão 0x100300 do codec Verbs from Linux Codec Dump File: 0x100300.txt Codec: Analog Devices AD1988B Address: 0 DevID: 299112843 (0x11d4198b) Jack Color Description Node PinDefault Original Verbs -------------------------------------------------------------------------------------------------------- 1/8 Green HP Out at Ext Front 17 0x11 0x02214030 01171c30 01171d40 01171e21 01171f02 1/8 Green Line Out at Ext Rear 18 0x12 0x01014010 01271c10 01271d40 01271e01 01271f01 Analog Black Speaker at Int Rear 19 0x13 0x511711f0 01371cf0 01371d11 01371e17 01371f51 1/8 Pink Mic at Ext Front 20 0x14 0x02a1902e 01471c2e 01471d90 01471ea1 01471f02 1/8 Blue Line In at Ext Rear 21 0x15 0x01813021 01571c21 01571d30 01571e81 01571f01 1/8 Black Line Out at Ext Rear 22 0x16 0x01011012 01671c12 01671d10 01671e01 01671f01 1/8 Pink Mic at Ext Rear 23 0x17 0x01a19020 01771c20 01771d90 01771ea1 01771f01 ATAPI Black CD at Int ATAPI 24 0x18 0x99331122 01871c22 01871d11 01871e33 01871f99 Analog Black Speaker at Int Rear 26 0x1a 0x911711f0 01a71cf0 01a71d11 01a71e17 01a71f91 Optical Other SPDIF Out at Ext Rear 27 0x1b 0x0145f1a0 01b71ca0 01b71df1 01b71e45 01b71f01 Optical Other SPDIF In at Ext Rear 28 0x1c 0x41c5f160 01c71c60 01c71df1 01c71ec5 01c71f41 1/8 Orange Line Out at Ext Rear 36 0x24 0x01016011 02471c11 02471d60 02471e01 02471f01 1/8 Grey Line Out at Ext Rear 37 0x25 0x01012014 02571c14 02571d20 02571e01 02571f01 -------------------------------------------------------------------------------------------------------- Jack Color Description Node PinDefault Modified Verbs -------------------------------------------------------------------------------------------------------- 1/8 Green HP Out at Ext Front 17 0x11 0x02214030 01171c30 01171d40 01171e21 01171f01 1/8 Green Line Out at Ext Rear 18 0x12 0x01014010 01271c10 01271d40 01271e01 01271f01 Analog Black Speaker at Int Rear 19 0x13 0x511711f0 01371cf0 01371d10 01371e17 01371f51 1/8 Pink Mic at Ext Front 20 0x14 0x02a1902e 01471c20 01471d90 01471ea1 01471f01 1/8 Blue Line In at Ext Rear 21 0x15 0x01813021 01571c40 01571d30 01571e81 01571f01 1/8 Black Line Out at Ext Rear 22 0x16 0x01011012 01671c50 01671d10 01671e01 01671f01 1/8 Pink Mic at Ext Rear 23 0x17 0x01a19020 01771c70 01771d90 01771ea1 01771f01 Analog Black Speaker at Int Rear 26 0x1a 0x911711f0 01a71c80 01a71d10 01a71e17 01a71f91 Optical Other SPDIF Out at Ext Rear 27 0x1b 0x0145f1a0 01b71ca0 01b71df0 01b71e45 01b71f01 Optical Other SPDIF In at Ext Rear 28 0x1c 0x41c5f160 01c71c60 01c71df0 01c71ec5 01c71f41 1/8 Orange Line Out at Ext Rear 36 0x24 0x01016011 02471c90 02471d60 02471e01 02471f01 1/8 Grey Line Out at Ext Rear 37 0x25 0x01012014 02571cb0 02571d20 02571e01 02571f01 -------------------------------------------------------------------------------------------------------- O seu é revisão 0x100200 Verbs from Linux Codec Dump File: 0x100200.txt Codec: Analog Devices AD1988B Address: 0 DevID: 299112843 (0x11d4198b) Jack Color Description Node PinDefault Original Verbs -------------------------------------------------------------------------------------------------------- 1/8 Green HP Out at Ext Front 17 0x11 0x02214030 01171c30 01171d40 01171e21 01171f02 1/8 Green Line Out at Ext Rear 18 0x12 0x01014010 01271c10 01271d40 01271e01 01271f01 Analog Black Speaker at Int Rear 19 0x13 0x511711f0 01371cf0 01371d11 01371e17 01371f51 1/8 Pink Mic at Ext Front 20 0x14 0x02a19022 01471c22 01471d90 01471ea1 01471f02 1/8 Blue Line In at Ext Rear 21 0x15 0x01813021 01571c21 01571d30 01571e81 01571f01 1/8 Black Line Out at Ext Rear 22 0x16 0x01011012 01671c12 01671d10 01671e01 01671f01 1/8 Pink Mic at Ext Rear 23 0x17 0x01a19020 01771c20 01771d90 01771ea1 01771f01 ATAPI Black CD at Int ATAPI 24 0x18 0x9933112e 01871c2e 01871d11 01871e33 01871f99 Analog Black Line In at Int Rear 26 0x1a 0x918711f0 01a71cf0 01a71d11 01a71e87 01a71f91 Optical Other SPDIF Out at Ext Rear 27 0x1b 0x0145f1f0 01b71cf0 01b71df1 01b71e45 01b71f01 Optical Other SPDIF In at Ext Rear 28 0x1c 0x41c5f1f0 01c71cf0 01c71df1 01c71ec5 01c71f41 1/8 Orange Line Out at Ext Rear 36 0x24 0x01016011 02471c11 02471d60 02471e01 02471f01 1/8 Grey Line Out at Ext Rear 37 0x25 0x01012013 02571c13 02571d20 02571e01 02571f01 -------------------------------------------------------------------------------------------------------- Jack Color Description Node PinDefault Modified Verbs -------------------------------------------------------------------------------------------------------- 1/8 Green HP Out at Ext Front 17 0x11 0x02214030 01171c30 01171d40 01171e21 01171f01 1/8 Green Line Out at Ext Rear 18 0x12 0x01014010 01271c10 01271d40 01271e01 01271f01 Analog Black Speaker at Int Rear 19 0x13 0x511711f0 01371cf0 01371d10 01371e17 01371f51 1/8 Pink Mic at Ext Front 20 0x14 0x02a19022 01471c20 01471d90 01471ea1 01471f01 1/8 Blue Line In at Ext Rear 21 0x15 0x01813021 01571c40 01571d30 01571e81 01571f01 1/8 Black Line Out at Ext Rear 22 0x16 0x01011012 01671c50 01671d10 01671e01 01671f01 1/8 Pink Mic at Ext Rear 23 0x17 0x01a19020 01771c60 01771d90 01771ea1 01771f01 Analog Black Line In at Int Rear 26 0x1a 0x918711f0 01a71c70 01a71d10 01a71e87 01a71f91 Optical Other SPDIF Out at Ext Rear 27 0x1b 0x0145f1f0 01b71c80 01b71df0 01b71e45 01b71f01 Optical Other SPDIF In at Ext Rear 28 0x1c 0x41c5f1f0 01c71c90 01c71df0 01c71ec5 01c71f41 1/8 Orange Line Out at Ext Rear 36 0x24 0x01016011 02471ca0 02471d60 02471e01 02471f01 1/8 Grey Line Out at Ext Rear 37 0x25 0x01012013 02571cb0 02571d20 02571e01 02571f01 -------------------------------------------------------------------------------------------------------- Precisa editar o Info.plist e modificar os verbs nas chaves ConfigData. Link to comment Share on other sites More sharing options...
Catilo Posted May 6, 2011 Share Posted May 6, 2011 Tenta usar "USBBusFix=yes" ou "USBLegacyOff=yes" junto com o busratio. nao deu certo, continua sem detectar o mouse. Mas consegui configurar toda a instalaçao somente com o teclado, mas nao consegui termina-la acho que meu dvd esta com problema. enfim, sera que depois de instalado vai detectar o mouse? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 6, 2011 Author Share Posted May 6, 2011 nao deu certo, continua sem detectar o mouse. Mas consegui configurar toda a instalaçao somente com o teclado, mas nao consegui termina-la acho que meu dvd esta com problema.enfim, sera que depois de instalado vai detectar o mouse? Vc tentou nas outras "portas" USB? Link to comment Share on other sites More sharing options...
DefKorns Posted May 6, 2011 Share Posted May 6, 2011 Aquela AD1988bFix como está não vai servir, precisa de alguns ajustes..... Precisa editar o Info.plist e modificar os verbs nas chaves ConfigData. Como faço isso? Abro o o terminal e edito o ad1988bfix? nano /extra/extensions/ad1988bfix.kext/Contents/Info.plist e altero para os valores da minha versao, é isso? Link to comment Share on other sites More sharing options...
Catilo Posted May 6, 2011 Share Posted May 6, 2011 Vc tentou nas outras "portas" USB? sim. so nao tentei nas portas frontais. E o pior é que nem o mouse ps2 nao esta detectando. Link to comment Share on other sites More sharing options...
DefKorns Posted May 6, 2011 Share Posted May 6, 2011 sim. so nao tentei nas portas frontais.E o pior é que nem o mouse ps2 nao esta detectando. nao sei se é o seu caso, mas eu apra meter um rato e teclado ps2 a tabalhar usei o voodoops2.kext Link to comment Share on other sites More sharing options...
oldnapalm Posted May 6, 2011 Share Posted May 6, 2011 Como faço isso? Abro o o terminal e edito o ad1988bfix? nano /extra/extensions/ad1988bfix.kext/Contents/Info.plist e altero para os valores da minha versao, é isso? Use o PlistEditPro. Com o nano ou qualquer editor de textos o valor da ConfigData não fica "legível". Link to comment Share on other sites More sharing options...
DefKorns Posted May 6, 2011 Share Posted May 6, 2011 tenho que usar os valores originais e modificados ou apenas os modificados nos dois campos de ConfigData? Link to comment Share on other sites More sharing options...
oldnapalm Posted May 6, 2011 Share Posted May 6, 2011 Apenas os modificados (igual nas duas chaves ConfigData). Mas veja que estes valores que eu postei foram gerados pelo Verbit, talvez nem todos sejam necessários. Tente comparar com os valores da kext que o Maldon postou. Esse tópico tem detalhes http://www.projectosx.com/forum/index.php?showtopic=465 Link to comment Share on other sites More sharing options...
DefKorns Posted May 6, 2011 Share Posted May 6, 2011 alterei os valores e nada. acho que vou voltar ao voodoohda, que ao menos tinha som 2,0 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 6, 2011 Author Share Posted May 6, 2011 alterei os valores e nada. acho que vou voltar ao voodoohda, que ao menos tinha som 2,0 se for usar a Voodoo, não esqueça de remover o HDEF ou então usar a AppleHdaDisabler Link to comment Share on other sites More sharing options...
DefKorns Posted May 6, 2011 Share Posted May 6, 2011 obrigado pela vossa disponibilidade. Da próxima vez que instalar vou ver se as coisas correm melhor. Mais uma vez obrigado MaLd0n e oldnapalm Link to comment Share on other sites More sharing options...
Catilo Posted May 7, 2011 Share Posted May 7, 2011 enfim consegui configurar meu OSx.....update 10.6.6 agora me deparei com o principal problema, minha placa de audio. uso uma ProFire 2626 Firewire, a kext dela peguei no site da m-audio. O problema esta no driver Firewire 1394 da placa mae, ela detecta normal a Profire, abre o painel dela e tudo, mas quando coloco algum som pra tocar, somente fica piscando o led dela e para de detecta-la. no windows eu ligava ela em uma placa Pci-firewire da Via ( VT6306), mas nao encontrei kexts pra ela. -------- Placa mae: P7P55 M Link to comment Share on other sites More sharing options...
MaLd0n Posted May 7, 2011 Author Share Posted May 7, 2011 enfim consegui configurar meu OSx.....update 10.6.6agora me deparei com o principal problema, minha placa de audio. uso uma ProFire 2626 Firewire, a kext dela peguei no site da m-audio. O problema esta no driver Firewire 1394 da placa mae, ela detecta normal a Profire, abre o painel dela e tudo, mas quando coloco algum som pra tocar, somente fica piscando o led dela e para de detecta-la. no windows eu ligava ela em uma placa Pci-firewire da Via ( VT6306), mas nao encontrei kexts pra ela. -------- Placa mae: P7P55 M vc usou o Auto-patcher? isso pode ser um "probleminha" dos IRQs Link to comment Share on other sites More sharing options...
Catilo Posted May 7, 2011 Share Posted May 7, 2011 sim....usei o auto patcher, e depois instalei o combo update 10.6.6.... precisa roda-lo novamente apos o update sera? e se usar o HDA disabler? o que seriam esses IRQs? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 7, 2011 Author Share Posted May 7, 2011 sim....usei o auto patcher, e depois instalei o combo update 10.6.6....precisa roda-lo novamente apos o update sera? e se usar o HDA disabler? o que seriam esses IRQs? Não, vc não precisa usar o Auto-Patcher novamente tente rodando o sistema em 32, use o arch=i386, pode ser que o drive seja pra 32 "interrupt request" Link to comment Share on other sites More sharing options...
Catilo Posted May 7, 2011 Share Posted May 7, 2011 tente rodando o sistema em 32, use o arch=i386, pode ser que o drive seja pra 32 Vou tentar, mas o driver no site da m-audio dizia que era compativel com 64..... vou esprementar em 32, até seria melhor no meu caso se rodar em 32... se acaso o problema for de IRQ, como posso resolve-lo? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 7, 2011 Author Share Posted May 7, 2011 Vou tentar, mas o driver no site da m-audio dizia que era compativel com 64.....vou esprementar em 32, até seria melhor no meu caso se rodar em 32... se acaso o problema for de IRQ, como posso resolve-lo? se vc usou o Auto-Patcher eles já foram corrigidos o problema deve ser o drive mesmo Link to comment Share on other sites More sharing options...
Catilo Posted May 8, 2011 Share Posted May 8, 2011 deletei a kext appleHPET.kext, vi um topico dizendo que iria resolver o problema de IRQ..... mas agora esta dando KP, e nao consigo iniciar nem com -x como repar essa kext?? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 8, 2011 Author Share Posted May 8, 2011 deletei a kext appleHPET.kext, vi um topico dizendo que iria resolver o problema de IRQ.....mas agora esta dando KP, e nao consigo iniciar nem com -x como repar essa kext?? Não se deleta essa kext, isso foi corrigido pelo DSDT sem HPET, sem gerenciamento de energia se vc tem dual boot, coloque essa kext novamente na pasta s/l/e e inicie o sistema com -f -v Link to comment Share on other sites More sharing options...
Recommended Posts