Komano Posted October 4, 2011 Share Posted October 4, 2011 No, the usb drive isn't appearing in my boot devices list on startup. How hard can it be following through an installation wizard? That i can't help you. Check your Bios Settings. Nothing to do with OS X or anything for that matter. Link to comment Share on other sites More sharing options...
nic.mroc Posted October 5, 2011 Share Posted October 5, 2011 Hello to everyone! You guys have done an amazing job & I'm really happy to join you & help you! I have already installed Snow Leopard to my laptop ( Signature ) and upgraded it to 10.6.8 using Nawcom's kernel. The system is extremely stable and all two cores are working great! VoodooPS2 Controller for keys & mouse too. Right now I am trying to patch my DSDT but I need some help. I used only some patches from the Auto- Patcher that is posted here for Dv6 i7 and got 0 errors ,warnings and remarks. I also patched it with gsly's guide and added ACPI 3.x Support which is working great. Same with my Realtek Ethernet for which I am using the official kext. UNFORTUNATELY: I cannot get sleep to work without sleep enabler. I tried the patch for the brightness without any change (also installed generic brightness kext.) I am using a VoodooHDA version which allows me to change the system volume but I just saw on a previous post that there is a patched AppleHDA version to work with my sound card. I tried that code on my DSDT but nothing happened. I would really appreciate a patch for my video card or my CPU ( for example SpeedStep.) I have attached my CLEAN DSDT (Ubuntu). I am not sure about the fixes that I have applied so I would like someone who is sure about what he is doing to apply the needed patches. I do not post the one that I am using now. But I have patched it with almost every patch that Auto- Patcher includes! (So got all usb ports and my webcam working). Thank you in advance for your help! I will try to help you in any way I can! CLEAN_DSDT.aml.zip Link to comment Share on other sites More sharing options...
Taptun Posted October 5, 2011 Share Posted October 5, 2011 Hello to everyone! You guys have done an amazing job & I'm really happy to join you & help you! ....... Thank you in advance for your help! I will try to help you in any way I can! Try it nic.mroc.zip @Taptun Link to comment Share on other sites More sharing options...
nic.mroc Posted October 6, 2011 Share Posted October 6, 2011 Thank you very much! I'll try to see if everything works when I get back from school and i will inform you! UPDATE 1: Everything works fine and I have full audio support. But I cannot change the brightness.I cannot see any slider or something like that ( Fn +F7 or F8 doesn't work too). (Of course that's not a real problem but see if you can do something.) When I try booting without Graphics Enabler = Yes I cannot get native resolution. Can this be fixed? (Not a serious prob but why don't?) Finally, when I close the lid or select sleep the screen turns black but the laptop freezes... All lights on the keyboard still on and nothing happens. Should I use sleep enabler or can this be fixed with DSDT? Thank you very much!!! I have also posted a send_me file (I'm using your DSDT.) if this helps. UPDATE 2: I just tested my HDMI connection. Video signal is great but no audio. Probably something's wrong with my GT230M. send_me.zip Link to comment Share on other sites More sharing options...
Komano Posted October 6, 2011 Share Posted October 6, 2011 GraphicsEnabler is necessary. You can put it in the Boot plist. Please stop using the crappy font. It's really hard to read... Link to comment Share on other sites More sharing options...
nic.mroc Posted October 6, 2011 Share Posted October 6, 2011 Thanks! Sorry for the font. Link to comment Share on other sites More sharing options...
macri81 Posted October 6, 2011 Share Posted October 6, 2011 @Komano Thank you very much for the help!!! the 64bit version worked (I hope) I am uploading the acpi dump now ACPI_Tables_2011_10_07_07_36.zip Link to comment Share on other sites More sharing options...
Komano Posted October 8, 2011 Share Posted October 8, 2011 Yep. Those are your actual ACPI Tables. Let me fix it up for you. EDIT: Woah. I have never seen a DSDT Table decompile with so many errors before. Link to comment Share on other sites More sharing options...
macri81 Posted October 8, 2011 Share Posted October 8, 2011 I know right!! 116 errors is that normal? Link to comment Share on other sites More sharing options...
Flashe Posted October 8, 2011 Share Posted October 8, 2011 Hi all, I have a HP DV7 6090ef ,when i try to install lion.Why i have a KP ? Thanks advance for help. Link to comment Share on other sites More sharing options...
Komano Posted October 8, 2011 Share Posted October 8, 2011 Is that an actual picture of the kernel panic? Because it seems like a lot of things are failing to load and that doesn't look like the kernel panic. @Macri81 After looking at your DSDT again. I must say that i'm unable to get it to compile properly. The only other person who has done such extensive stuff like this is actually MaLd0n. I tried finding out what he had changed but was unable to. You might want to take a look. http://www.insanelymac.com/forum/index.php...=254758&hl= I'm actually very interested to find out how to fix your DSDT. I believed it was a Syntax Error but if you're a programmer, finding a Syntax Error in over 10000 lines is insane especially if you don't know where to start with. :S I take that back. i'll post the download in a bit. Link to comment Share on other sites More sharing options...
Taptun Posted October 8, 2011 Share Posted October 8, 2011 @Komano Thank you very much for the help!!! the 64bit version worked (I hope) I am uploading the acpi dump now Try it :censored2: macri81.zip Make Ioreg file (for Windows - ioreg-l-x-w 1024> ioreg.txt) not at hand MacOSX , Windows only @Taptun Link to comment Share on other sites More sharing options...
Komano Posted October 8, 2011 Share Posted October 8, 2011 or Well. Taptun can do it. :censored2: damn. Link to comment Share on other sites More sharing options...
Flashe Posted October 8, 2011 Share Posted October 8, 2011 Is that an actual picture of the kernel panic? Because it seems like a lot of things are failing to load and that doesn't look like the kernel panic. @Macri81 After looking at your DSDT again. I must say that i'm unable to get it to compile properly. The only other person who has done such extensive stuff like this is actually MaLd0n. I tried finding out what he had changed but was unable to. You might want to take a look. http://www.insanelymac.com/forum/index.php...=254758&hl= I'm actually very interested to find out how to fix your DSDT. I believed it was a Syntax Error but if you're a programmer, finding a Syntax Error in over 10000 lines is insane especially if you don't know where to start with. :S I take that back. i'll post the download in a bit. @Komano Effectively there are many things that will not load,but what to do ? Link to comment Share on other sites More sharing options...
Taptun Posted October 8, 2011 Share Posted October 8, 2011 or Well. Taptun can do it. damn. By the way, version MaLd0n not all of the fixes, see my DSDT :censored2: Programs comparison : - WinMerge (for windows) - Diffmerge (for windows and MacOS) google to help you use Flashe ! Delete kext - ATIRodeonX3000 @Taptun Link to comment Share on other sites More sharing options...
Flashe Posted October 8, 2011 Share Posted October 8, 2011 By the way, version MaLd0n not all of the fixes, see my DSDT Programs comparison : - WinMerge (for windows) - Diffmerge (for windows and MacOS) google to help you use Flashe ! Delete kext - ATIRodeonX3000 @Taptun Hi Taptun, After delete this kext Always impossible of do the installation. Link to comment Share on other sites More sharing options...
Taptun Posted October 8, 2011 Share Posted October 8, 2011 Hi Taptun,After delete this kext ..... Always impossible of do the installation. Send me net DSDT(SSDT) + IOReg (Mac+Windows) I'm look @Taptun Link to comment Share on other sites More sharing options...
Flashe Posted October 8, 2011 Share Posted October 8, 2011 Send me net DSDT(SSDT) + IOReg (Mac+Windows)I'm look @Taptun @Taptun What application for dump DSDT(SSDT)+IORreg since windows because i don't have mac os x install for this laptop. I can tell you that under windows. Thanks. iasl.zip Link to comment Share on other sites More sharing options...
Taptun Posted October 8, 2011 Share Posted October 8, 2011 @TaptunWhat application for dump DSDT(SSDT)+IORreg since windows because i don't have mac os x install for this laptop. I can tell you that under windows. Thanks. DSDT + SSDT ? And what is that .... iasl.zip what it eats I asked , to clean DSDT(+SSDT) + IOReg Waiting Link to comment Share on other sites More sharing options...
Flashe Posted October 8, 2011 Share Posted October 8, 2011 DSDT + SSDT ? And what is that .... iasl.zip what it eats I asked , to clean DSDT(+SSDT) + IOReg Ok, Sorry Taptun,for the time being impossible for me install lion on this laptop. when finished,i post my DSDT(+SSDT) +IOReg for you. Link to comment Share on other sites More sharing options...
Taptun Posted October 8, 2011 Share Posted October 8, 2011 Ok,Sorry Taptun,for the time being impossible for me install lion on this laptop. when finished,i post my DSDT(+SSDT) +IOReg for you. OK , Waiting Link to comment Share on other sites More sharing options...
macri81 Posted October 8, 2011 Share Posted October 8, 2011 Try it macri81.zip Make Ioreg file (for Windows - ioreg-l-x-w 1024> ioreg.txt) not at hand MacOSX , Windows only @Taptun @Taptun and @Komano Thank you all so very much for this!!! I knew i was out of my depths when i saw all those errors You guys are legends!! ;) Link to comment Share on other sites More sharing options...
Flashe Posted October 9, 2011 Share Posted October 9, 2011 OK , Waiting Hello Taptun, Here is my SSDT and DSDT from windows. acpi_dsdt.aml.zip ssdt.zip Link to comment Share on other sites More sharing options...
Taptun Posted October 9, 2011 Share Posted October 9, 2011 Hello Taptun, Here is my SSDT and DSDT from windows. Hi Flashe Please send me report AIDA64(Everest) all partition @Taptun Link to comment Share on other sites More sharing options...
GDMorry Posted October 9, 2011 Share Posted October 9, 2011 Is there a MIIF available for a "Sandy Bridge" i7 DV7 (DV7-6111tx) 2.00GHz ... Intel® Core™ i7-2630QM I had great success with it on my DV6-2114tx and had everything working a treat except the WLAN (used a "Ralink" usb adapter $15 on eBay = AWESOME). SO now I have this DV7-6111tx and want it to be as good I have extracted a "clean dsdt.aml" but there is no option for it in "auto patcher" Advice on the best way to install Lion would be appreciated. dsdt.aml.zip Link to comment Share on other sites More sharing options...
Recommended Posts