Silthrim Posted August 18, 2006 Share Posted August 18, 2006 Can somebody please help me through getting my integrated Intel Pro 10/100 VE Network card to work? I've looked everywhere but I can't find anything that will work. Also I have a Radeon X1300, is there anyway to get my resolution to 1280x1024? It would be great if somebody could actually help me instead of saying "go download the tulip.kext".. Thanks, Silthrim Link to comment Share on other sites More sharing options...
Silthrim Posted August 18, 2006 Author Share Posted August 18, 2006 BUMP! Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted August 18, 2006 Share Posted August 18, 2006 First you should wait, pateince is a virtue (so's spelling but i wasnt blessed with that ). Also you can search for most of what you need. Search for editing the boot.plist, and check the wiki for your lan card. Link to comment Share on other sites More sharing options...
Guest BuildSmart Posted August 18, 2006 Share Posted August 18, 2006 while the wiki provides editing of the plist to make a hardware match it may not render a properly working interface as noted by some users who have connectivity issues. I'm working on a proper solution but require some assistance from someone who has time and a little programming skills (SEE: http://forum.insanelymac.com/index.php?showtopic=25097) to speed the process along. Link to comment Share on other sites More sharing options...
ѕӎѳѳ₮ңӌ Posted August 19, 2006 Share Posted August 19, 2006 He wishes to change his resolution which unless his card is supported which i dont think it is, requires his boot.plist editing. I myself have had no experience with that lan controller so the best place i could send him was the wiki. Just trying to help Link to comment Share on other sites More sharing options...
Silthrim Posted August 20, 2006 Author Share Posted August 20, 2006 i have followed the guide about editing the tulip.kext and that didnt work at all... now let me see if i can get my resolution to work Link to comment Share on other sites More sharing options...
ilgigolo Posted August 21, 2006 Share Posted August 21, 2006 Silthrim, to make work LAN: Open up terminal. and write: CODE sudo vi /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8255x.kext/Contents/Info.plist it will prompt for password. move with cursor keys and you will find this section: <key>IOPCIMatch</key> <string>0x10518086 0x10508086 "0x27dc8086" 0x10298086 0x10308086&0xfff0ffff 0x12098086 0x12278086 0x12288086 0x12298086 0x24498086 0x24598086 0x245d8086 0x10918086 0x10608086&0xfff0ffff</string> You will need to add " " text. to add text in vi, you'll need to push "i" key - to get into "insert" mode. if you got it there, pres ESC and write ":wq!" to exit vi editor and save changes. now, you'll need to clear kext cache, so when osx will start, it will rebuild with your changes. this is the command: CODE sudo rm /System/Library/Extensions.* now, if all is OK, you can reboot and you will have network working Link to comment Share on other sites More sharing options...
dannymichel Posted February 25, 2008 Share Posted February 25, 2008 Where can I download tulip.kext? Link to comment Share on other sites More sharing options...
Recommended Posts