mactj65 Posted March 24, 2011 Share Posted March 24, 2011 It stops at the same point could it be an other error? Link to comment Share on other sites More sharing options...
copil Posted March 24, 2011 Share Posted March 24, 2011 It stops at the same point could it be an other error? But I'm not sure you could attach a picture? Link to comment Share on other sites More sharing options...
mactj65 Posted March 24, 2011 Share Posted March 24, 2011 Here is the photo. I never hat an error like this Tried some other kexts but nothing Hope it will help Link to comment Share on other sites More sharing options...
mactj65 Posted March 24, 2011 Share Posted March 24, 2011 The external drive is regognized. There you can read usbdrive samsung... lp64 creating ram disk ... And then it stops at this point Link to comment Share on other sites More sharing options...
JhackJ Posted March 27, 2011 Share Posted March 27, 2011 ok, i've managed to install Lion, but i can't boot it. when i boot into [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] it doesn't detect my Lion install, the only thing [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] detects is USB Flash or USB HD not internal HDs. am i missing any settings in the BIOS. I have SATA Native mode ON and using AHCI (Snow works fine) Link to comment Share on other sites More sharing options...
Cengiz sevinir Posted March 27, 2011 Share Posted March 27, 2011 Thank you very much, I'm amazed at how many people are helping on this thread very nice to see.. EDIT: Sadly still can't get it working, I'm still seeing this: remove all usb hardvare problems will solve Link to comment Share on other sites More sharing options...
PGHammer Posted March 31, 2011 Share Posted March 31, 2011 remove all usb hardvare problems will solve Alternately, attach a PS/2 keyboard *without* removing the USB peripherals. I have a PS/2 keyboard which I only use with the stick ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]) menu - once the stick hands off, the USB keyboard and mouse, in most cases, should work just fine. (I use the same USB keyboard and mouse with all three OSes I run natively - 7 Ultimate x64, Snow, and Lion - Microsoft Wireless Keyboard 6000 V.3 (keyboard) and Logitech V220 (mouse). The q remove all usb hardvare problems will solve Alternately, attach a PS/2 keyboard *without* removing the USB peripherals. I have a PS/2 keyboard which I only use with the stick ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]) menu - once the stick hands off, the USB keyboard and mouse, in most cases, should work just fine. (I use the same USB keyboard and mouse with all three OSes I run natively - 7 Ultimate x64, Snow, and Lion - Microsoft Wireless Keyboard 6000 V.3 (keyboard) and Logitech V220 (mouse). The quirk is in the OS running on the stick, not Lion. Lion boots fine with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] - but then USB mouse and keyboard don't work! I don't know why! Please help! (Tried changing BIOS settings) Intel DP55WB Motherboard. Core i7 870 I keep a PS/2 keyboard plugged in *only* to navigate around [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/XPC on the stick - my USB keyboard and mouse (both wireless in addition) work just fine. Link to comment Share on other sites More sharing options...
Dellmantt Posted March 31, 2011 Share Posted March 31, 2011 Little Snitch for Lion http://translate.googleusercontent.com/tra...LgXU0LFJ9LswHFw Istat menus Version 3.16 (3.16) working as is Office 2011, Spirited Away 0.7 Link to comment Share on other sites More sharing options...
RCOO Posted April 1, 2011 Share Posted April 1, 2011 Is there a way to get the new Mail 5 and the new iCal to work on Mac OS X 10.6.7? Link to comment Share on other sites More sharing options...
lorenzothebest Posted April 3, 2011 Share Posted April 3, 2011 Can you upload o give me the link of the kexts nvenabler? because i have a kext but it doesn't enable QE CI for me. Link to comment Share on other sites More sharing options...
MichaelTravis Posted April 4, 2011 Share Posted April 4, 2011 Anybody having trouble check out my LION VIDEO INSTALL GUIDE, I combined this guide with a few others I had found because after reading them all I was still having trouble getting Lion to work, But I figured Everything out....So most credit is due to those who went before me, thanks for the guide(s).....check out my Video Link to comment Share on other sites More sharing options...
carlevarino Posted April 12, 2011 Share Posted April 12, 2011 guys please help me I tried this tuto and everything getting boot the installer works but! when the fuji moun apear ! says mac osx 10.7 can not be installed on this computer If you want to restore your system from a time machine backupo click restore from backup! I have a Intel Core 2 duo processor nvidia 9400gT 1G !! Pleasee somebody helpme! Link to comment Share on other sites More sharing options...
stefano.85 Posted April 14, 2011 Share Posted April 14, 2011 Alternately, attach a PS/2 keyboard *without* removing the USB peripherals. I have a PS/2 keyboard which I only use with the stick ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]) menu - once the stick hands off, the USB keyboard and mouse, in most cases, should work just fine. (I use the same USB keyboard and mouse with all three OSes I run natively - 7 Ultimate x64, Snow, and Lion - Microsoft Wireless Keyboard 6000 V.3 (keyboard) and Logitech V220 (mouse). The q Alternately, attach a PS/2 keyboard *without* removing the USB peripherals. I have a PS/2 keyboard which I only use with the stick ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]) menu - once the stick hands off, the USB keyboard and mouse, in most cases, should work just fine. (I use the same USB keyboard and mouse with all three OSes I run natively - 7 Ultimate x64, Snow, and Lion - Microsoft Wireless Keyboard 6000 V.3 (keyboard) and Logitech V220 (mouse). The quirk is in the OS running on the stick, not Lion. I keep a PS/2 keyboard plugged in *only* to navigate around [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/XPC on the stick - my USB keyboard and mouse (both wireless in addition) work just fine. same problem here.... here my post in another thread where i explain more about my starting experience with lion: http://www.insanelymac.com/forum/index.php...mp;st=860 Link to comment Share on other sites More sharing options...
RCOO Posted April 17, 2011 Share Posted April 17, 2011 I've been trying to boot of [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. I can get to the restored base system partition, it loads the drivers and then shows this: I have no idea what to do. I've tried several boot flags. I've got an Asus P5GZ-MX. Really puzzled. Would appreciate if anyone could help. Link to comment Share on other sites More sharing options...
Shaithis Posted April 18, 2011 Share Posted April 18, 2011 guys please help me I tried this tuto and everything getting boot the installer works but! when the fuji moun apear ! says mac osx 10.7 can not be installed on this computer If you want to restore your system from a time machine backupo click restore from backup! You need to delete PlatformSupport.plist from the install disk you made. Link to comment Share on other sites More sharing options...
DragonHunter12345 Posted April 18, 2011 Share Posted April 18, 2011 Just asking, do you need a developer account to install or use Mac OS X Lion??? Link to comment Share on other sites More sharing options...
fantomas Posted April 18, 2011 Share Posted April 18, 2011 Just asking, do you need a developer account to install or use Mac OS X Lion??? no Link to comment Share on other sites More sharing options...
me@home Posted April 18, 2011 Share Posted April 18, 2011 Just asking, do you need a developer account to install or use Mac OS X Lion??? both is yes...however you might install without any password so it's possible to use a black market version of Lion Link to comment Share on other sites More sharing options...
fantomas Posted April 18, 2011 Share Posted April 18, 2011 both is yes...however you might install without any password so it's possible to use a black market version of Lion ? i dont understand !! to acquire a beta version of Lion, yes you need to have a count developer, but to install it on your PC, no !!! Link to comment Share on other sites More sharing options...
Abid Khan Posted April 18, 2011 Share Posted April 18, 2011 Hi, I getting this error, Thanks Link to comment Share on other sites More sharing options...
fantomas Posted April 18, 2011 Share Posted April 18, 2011 you must use a patched OSInstall.mpkg !! OSInstall_Lion_DP2_FIXED.zip you replace the original with this one !! Link to comment Share on other sites More sharing options...
Abid Khan Posted April 18, 2011 Share Posted April 18, 2011 Thanks fantomas1 OSInstall.mpkg work and i able to install Lion on my i7 Now problem is when i trying to boot i getting this..... image attached i using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] latest version for booting lion cuz XPc didnt working.. it showing "still waiting for root device. Regards Link to comment Share on other sites More sharing options...
stefano.85 Posted April 18, 2011 Share Posted April 18, 2011 Have you installed fakesmc in S/L/E after lion installation? if you have another partition with Snow leopard you can install your kexts from there in that dir, remember to change folder and kext permission of the new ones before to reboot. cheers Link to comment Share on other sites More sharing options...
Abid Khan Posted April 18, 2011 Share Posted April 18, 2011 Have you installed fakesmc in S/L/E after lion installation? if you have another partition with Snow leopard you can install your kexts from there in that dir, remember to change folder and kext permission of the new ones before to reboot. cheers I finished instalation and then system was reboot, after that i didnt booting and i getting error, if it boot for once then i be able to install fakesmc. i didnt have other partition of snow on this laptop, indeed i have win7 Regards Link to comment Share on other sites More sharing options...
stefano.85 Posted April 18, 2011 Share Posted April 18, 2011 I finished instalation and then system was reboot, after that i didnt booting and i getting error, if it boot for once then i be able to install fakesmc. i didnt have other partition of snow on this laptop, indeed i have win7 Regards lion doesn't start because it doesn't load/find fakesmc, there are a few comands that you have to type in order to add fakesmc.kext in S/L/E from your bootloader (XPC or [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]), than you should ready to go, although i don't remember the exact procedure now, try to find it in this or another lion related installation threads... cheers Link to comment Share on other sites More sharing options...
Recommended Posts