wmarsh Posted January 26, 2011 Share Posted January 26, 2011 Hi all! We finally succeeded in getting Mobility Radeon HD 4xxx working with QE/CI This thread originally was a forum for those who did not give up and continued to work towards a solution. We were told it was impossible but we did not give up. Persistence has brought success. http://www.insanelymac.com/forum/index.php...t&p=1444321 Please post your ideas and contributions. New user mucha first attained full QE/CI -- and posted a guide. http://www.insanelymac.com/forum/index.php...t&p=1655182 Kizwan is collecting fully working patches here: http://www.insanelymac.com/forum/index.php...=0#entry1660086 What if the screen is blurry with "white lines" once you enable QE? Or strange colors (with 10.7 or 10.6.7MBP kexts) Sorry, no fix yet The consensus is the best bootloader for this method is chameleon trunk, modified so that your card is supported with GraphicsEnabler. Get the code from here: http://code.google.com/p/chameleon/source/checkout Modify the code in trunk by finding file /i386/libsaio/ati.c Search for the 2nd instance of your device id in the file change: { 0x10029552, "Peregrine"} , to: { 0x10029552, "Flicker"} , (or whichever FB you want) then recompile and use your new binary (there are some precompiled binaries posted -- no promises about one for your card and your FB) You need a controller (eg. ATI4600Controller.kext) with your dev id added to info.plist. (In Lion and 2011 MBP 10.6.7 the FB may also be specified in its info.plist, and you may find the FB to modify in its executable) You need Developers Tools installed, unless someone you trust tells you the offset in the executable where to change. You need a hex editor (I use 0xED) unless someone gives you a pre-edited kext You will need bcc9's radeon_bios_decode tool to figure out the sensid for your card, posted here: http://www.insanelymac.com/forum/index.php...=0#entry1647625 This tool is very useful, and also gives you good information about encoders You need an extracted VBIOS to use it -- see next paragraph You may need dong's RadeonDump tool and RadeonHD.kext for this method. RadeonHD only works for 4xxx and below and only arch=i386 I find I can get dmesg from RadeonHD without setting debug=true or verbose=2, therefore leaving screen usable. for tool google "dong VBIOS" download vbios.zip from 1st link (not necessary if you can extract your vbios with gpu-z in Windows and use Linux or bcc9's tool for dmesg) dong looks like he is about to post an updated RadeonHD -- available here http://www.insanelymac.com/forum/index.php...00#entry1660427 Alternate way to get dmesg (thanks crazybirdy!) through Linux -- this should work for 5xxx and 6xxx (Purpose is to get dmesg so you can figure out you encoder/decoder values) http://www.insanelymac.com/forum/index.php...00#entry1657630 Checcco recommends (and I have confirmed) you get MUCH MORE INFORMATION than any other method by pushing F6 then escape when booting ubuntu, then add "radeon.modeset=0" without quotes to boot options Look in the file /var/log/Xorg.0.log Our thanks to dong (for his RadeonHD.kext we have tried to obsolete and his tool) to bcc9 for inventing the method and decoding sensid. to mucha for decoding the tranmitter/encoders to dong for explaining why EDID is not loaded by AppleFramebuffer to kizwan and crazybirdy and c0ke for their help and to checcco for expanding this to 5xxx The GREEN Apple is normal for certain GPUs -- thank you hjs89 1 Link to comment Share on other sites More sharing options...
wmarsh Posted January 27, 2011 Author Share Posted January 27, 2011 Is there some water waving effect when you open the dashborad apps??Can you post a picture of your graphics profile in your "system profiler" ? Yes to both. I won't leave the picture up long, it takes up too much space. And I can watch full screen Quicktime Videos. Link to comment Share on other sites More sharing options...
Ccc Posted January 27, 2011 Share Posted January 27, 2011 Yes to both. I won't leave the picture up long, it takes up too much space. And I can watch full screen Quicktime Videos. This is great! I have been waiting for the driver for HD4330 for months. Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 Finally what did you do? You deleted all ATI kexts from S/L/E and after except ATIFramebuffer.kext, ATIRadeonX2000.kext, and ATISupport.kext? Did you use RadeonHD? Sorry but my english is regular and I can't understand well it. I've a HD4570 that uses the same chipset as yours and this can be very usefull for me Link to comment Share on other sites More sharing options...
smartie77 Posted January 27, 2011 Share Posted January 27, 2011 so time has made my "no no" sayings obsolote =? i am formatting my toshiba as i write this, will try and report back : mobilty4650 which never worked with x2000 kexts, leo and snow leo. i have a 10.6.0 dvd and will manually update to 10.6.6 - takes a while. lets hope it will do .. that would be my birthday present for today.. *hoping* *wishing* :-} Link to comment Share on other sites More sharing options...
royideas Posted January 27, 2011 Share Posted January 27, 2011 so time has made my "no no" sayings obsolote =? i am formatting my toshiba as i write this, will try and report back : mobilty4650 which never worked with x2000 kexts, leo and snow leo. i have a 10.6.0 dvd and will manually update to 10.6.6 - takes a while. lets hope it will do .. that would be my birthday present for today.. *hoping* *wishing* :-} I have toshiba satellite A500 and the same card ati mobility 4650) let me know if you have success thx you Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 so time has made my "no no" sayings obsolote =? i am formatting my toshiba as i write this, will try and report back : mobilty4650 which never worked with x2000 kexts, leo and snow leo. i have a 10.6.0 dvd and will manually update to 10.6.6 - takes a while. lets hope it will do .. that would be my birthday present for today.. *hoping* *wishing* :-} hehe, I'm doing the same now in my Aspire. I don't want to be pesimist. But that picture doesn't say anything. Whit my 4570 whitout drivers I've the same information. Can you put more screenshots doing thing in SL that requires QE/CI? Link to comment Share on other sites More sharing options...
wmarsh Posted January 27, 2011 Author Share Posted January 27, 2011 hehe, I'm doing the same now in my Aspire. I don't want to be pesimist. But that picture doesn't say anything. Whit my 4570 whitout drivers I've the same information. Can you put more screenshots doing thing in SL that requires QE/CI? Well the 1 picture takes up 2/3 of my storage space. I had to delete old attachments to fit it. I can replace it with another if you say what you want. But the real proof is others duplicating this. Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 Do you have transparent bar? Can you use front row? Are the screensavers working? Do you have the "cool" effects in Dashboard? Now I'm in 10.6.6. I've this files in S/L/E RadeonHD.kext ATIFramebuffer.kext // Not loaded ATIRadeonX2000.kext ATIRadeonX2000GA.plugin ATIRadeonX2000GLDriver.plugin ATIRadeonX2000VADriver.plugin ATISupport.kext I don't know if you've done anything different. I'wll thank your help My experience for the moment: - Cursor HW Acceleration doesn't work, I've a corruption cursor. - HDMI is working!! Not perfectly, but I can see something like a desktop. - Chess is working well. - Photo Booth works fine. The last time I've used when i used the effects where corrupted, now are working. - No transparent Toolbar. - No "cool" effects in Dashboard. - I can play divx in Quicktime after install Divx for Mac, only uses 40% of CPU when is playing. - Black screen in VLC when I try to play a divx. Maybe it's a bug of VLC. Recently happende me in Windows. I want to check more things. I think that QE/CI it's not working properly. But it's the closer thing to work that I've seen. Since the last time that I used OSX there are some updates of RadeonHD. Maybe that is the reason of the improvements. Link to comment Share on other sites More sharing options...
Ccc Posted January 27, 2011 Share Posted January 27, 2011 Well the 1 picture takes up 2/3 of my storage space. I had to delete old attachments to fit it. I can replace it with another if you say what you want. But the real proof is others duplicating this. Can you post the ATI*.kext files here? I tried but it couldn't recgnize my 4330card. I started from installing 10.6.5 and then update to 10.6.6. and after that the keyboard isn't working so I spend a lot of time trying to get it work(still not working). tried different combinations AppleACPIPS2Nub.kext + ApplePS2Controller.kext not working AppleACPIPS2Nub.kext + VoodooPS2Controller.kext not working So please could you also post the kext for the keyboard? btw, is your sound card is alc227 ? if so, which drive should I use? many thanks! Link to comment Share on other sites More sharing options...
Ccc Posted January 27, 2011 Share Posted January 27, 2011 Do you have transparent bar?Can you use front row? Are the screensavers working? Do you have the "cool" effects in Dashboard? Now I'm in 10.6.6. I've this files in S/L/E RadeonHD.kext ATIFramebuffer.kext // Not loaded ATIRadeonX2000.kext ATIRadeonX2000GA.plugin ATIRadeonX2000GLDriver.plugin ATIRadeonX2000VADriver.plugin ATISupport.kext I don't know if you've done anything different. I'wll thank your help My experience for the moment: - Cursor HW Acceleration doesn't work, I've a corruption cursor. - HDMI is working!! Not perfectly, but I can see something like a desktop. - Chess is working well. - Photo Booth works fine. The last time I've used when i used the effects where corrupted, now are working. - No transparent Toolbar. - No "cool" effects in Dashboard. - I can play divx in Quicktime after install Divx for Mac, only uses 40% of CPU when is playing. - Black screen in VLC when I try to play a divx. Maybe it's a bug of VLC. Recently happende me in Windows. I want to check more things. I think that QE/CI it's not working properly. But it's the closer thing to work that I've seen. Since the last time that I used OSX there are some updates of RadeonHD. Maybe that is the reason of the improvements. My situation is much the same as yours. With in these kexts in S/L/E: RadeonHD.kext ATIFramebuffer.kext ATIRadeonX2000.kext ATIRadeonX2000GA.plugin ATIRadeonX2000GLDriver.plugin ATIRadeonX2000VADriver.plugin ATISupport.kext Only ATISupport.kext is loaded. Resolution can not change. Chess works. PhotoBooth works No transparent tool bar front row gives black screen, press ESC then escape. Quicktime could play *.mp4 files but aspect ratio is not correct (may be due to the resolution) Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 Well the 1 picture takes up 2/3 of my storage space. I had to delete old attachments to fit it. I can replace it with another if you say what you want. But the real proof is others duplicating this. Can you do all this things? Link to comment Share on other sites More sharing options...
c0ke Posted January 27, 2011 Share Posted January 27, 2011 I think would be very useful if everyone posts its own hardware composition on his signature, to better understand different situations My situation is much the same as yours.With in these kexts in S/L/E: RadeonHD.kext ATIFramebuffer.kext ATIRadeonX2000.kext ATIRadeonX2000GA.plugin ATIRadeonX2000GLDriver.plugin ATIRadeonX2000VADriver.plugin ATISupport.kext Only ATISupport.kext is loaded. Resolution can not change. Chess works. PhotoBooth works No transparent tool bar front row gives black screen, press ESC then escape. Quicktime could play *.mp4 files but aspect ratio is not correct (may be due to the resolution) Link to comment Share on other sites More sharing options...
Ccc Posted January 27, 2011 Share Posted January 27, 2011 I think would be very useful if everyone posts its own hardware composition on his signature, to better understand different situations HD info Updated in signature. Link to comment Share on other sites More sharing options...
wmarsh Posted January 27, 2011 Author Share Posted January 27, 2011 Do you have transparent bar? yes Can you use front row? Have not tried [EDIT -- Tried Front Row. It does not work. So we are not quite there yet, but we are closer.] Are the screensavers working?Do you have the "cool" effects in Dashboard? Yes and Yes Now I'm in 10.6.6. I've this files in S/L/E RadeonHD.kext ATIFramebuffer.kext // Not loaded ATIRadeonX2000.kext ATIRadeonX2000GA.plugin ATIRadeonX2000GLDriver.plugin ATIRadeonX2000VADriver.plugin ATISupport.kext I load ATIRadeonX2000.kext and ATISupport.kext I think anyone who does not get ATIRadeonX2000.kext to load should try adding their device id to this kext. Mine (0x95521002) was in it as shipped from Apple, others might not be so fortunate. ATIFramebuffer.kext does not load, its using dong's driver as Framebuffer When I added Device id to ATIRadeon4500Controller.kext and used kextutil -v I got very interesting messages posted here: http://www.insanelymac.com/forum/index.php...t&p=1630089 - Cursor HW Acceleration doesn't work, I've a corruption cursor.- HDMI is working!! Not perfectly, but I can see something like a desktop. - Chess is working well. - Photo Booth works fine. The last time I've used when i used the effects where corrupted, now are working. - No transparent Toolbar. - No "cool" effects in Dashboard. - I can play divx in Quicktime after install Divx for Mac, only uses 40% of CPU when is playing. - Black screen in VLC when I try to play a divx. Maybe it's a bug of VLC. Recently happende me in Windows. My cursor is fine. Don't have an HDMI port. Chess works, but it worked before too. Have not tried photo booth. Have transparent toolbar and effects. Quicktime works for quicktime movies, have not tried Divx plugin. VLC worked before, I have an older build installed, did not try it again yet. Since the last time that I used OSX there are some updates of RadeonHD. Maybe that is the reason of the improvements. I have a version compiled for 64 bit; found it on this board somewhere. If I had expected success I would have written done where. Can you post the ATI*.kext files here? They are the unmodified ones from 10.6.6 -- posting might violate board rules. I started from installing 10.6.5 and then update to 10.6.6. and after that the keyboard isn't working so I spend a lot of time trying to get it work(still not working). tried different combinations AppleACPIPS2Nub.kext + ApplePS2Controller.kext not working AppleACPIPS2Nub.kext + VoodooPS2Controller.kext not working I had that problem too. The new VoodooPS2Controller (downloadable from their website) conflicts with AppleACPIPS2Nub.kext and no longer requires it. And I found it only worked in /S/L/E, not in /E/E btw, is your sound card is alc227 ? if so, which drive should I use? I used VoodooHDA.kext. But the update broke the volume control. You can still adjust volume using the PCM slider in Pref Pane. I am looking for a better solution. I think would be very useful if everyone posts its own hardware composition on his signature, to better understand different situations Excellent idea. My HD4330 is 256MB and Ccc is 512MB. They may have different device ids. Mine is (0x95521002) Can you do all this things? All the ones I have tried and enumerated above. Some I have not tried. My laptop is at home and I will tonight. Finally what did you do? You deleted all ATI kexts from S/L/E and after except ATIFramebuffer.kext, ATIRadeonX2000.kext, and ATISupport.kext? Did you use RadeonHD? Sorry but my english is regular and I can't understand well it. I've a HD4570 that uses the same chipset as yours and this can be very usefull for me Let me clarify: You delete no kexts from /S/L/E Especially not the ATI ones. You use RadeonHD.kext too, also in /S/L/E You make sure your device id is in ATIRadeonX2000.kext (mine was) You repair permissions, and mkext, reboot -f -v and pray. My situation is much the same as yours.With in these kexts in S/L/E: RadeonHD.kext ATIFramebuffer.kext ATIRadeonX2000.kext ATIRadeonX2000GA.plugin ATIRadeonX2000GLDriver.plugin ATIRadeonX2000VADriver.plugin ATISupport.kext Only ATISupport.kext is loaded. Resolution can not change. Resolution changes for me and ATIRadeonX2000.kext loads I think you need to check for your device ID in ATIRadeonX2000.kext Or give us the output of sudo kextutil -v ATIRadeonX2000.kext Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 I load ATIRadeonX2000.kext and ATISupport.kext I think anyone who does not get ATIRadeonX2000.kext to load should try adding their device id to this kext. Mine (0x95521002) was in it as shipped from Apple, others might not be so fortunate. ATIFramebuffer.kext does not load, its using dong's driver as Framebuffer When I added Device id to ATIRadeon4500Controller.kext and used kextutil -v I got very interesting messages posted here: http://www.insanelymac.com/forum/index.php...t&p=1630089 Ok, but now I'm looking my files and I haven't any file called ATIRadeon4500Controller, I had in previous versions but now I have one called ATIRadeon4600Controller.kext. Can you share this one? My ATI is a 4570 whit 512mb, uses the same chipset as yours M92 and his Device ID is 0x95531002. Link to comment Share on other sites More sharing options...
wmarsh Posted January 27, 2011 Author Share Posted January 27, 2011 Ok, but now I'm looking my files and I haven't any file called ATIRadeon4500Controller, I had in previous versions but now I have one called ATIRadeon4600Controller.kext. Can you share this one? My ATI is a 4570 whit 512mb, uses the same chipset as yours M92 and his Device ID is 0x95531002. Well you might have deleted them when you did the upgrade. We used to have to do that to prevent kernel panic. I do not believe board rules allow us to post Apple kexts. And I have no more room for attachments right now with that picture. If you can't get them off another box, then download the update again and extract the kexts you are missing with Pacifist. Your device id is already listed in ATIRadeonX2000.kext, which is the file you want. Yours is also listed in ATIRadeon4500Controller.kext I am not loading that one; it won't load if I add device id. You may or may not have to delete it, I do not know. Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 Or give us the output of sudo kextutil -v ATIRadeonX2000.kext sudo kextutil -v /System/Library/Extensions/ATIRadeonX2000.kext Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeDirectory /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeRequirements /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeResources /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeSignature /System/Library/Extensions/ATIRadeonX2000.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/ATIRadeonX2000.kext. /System/Library/Extensions/ATIRadeonX2000.kext successfully loaded (or already loaded). I've some problems with X2000 EDIT: Now I'm re-downloading the combo 10.6.6 to extract the ATI's files. Anyway I didn't delete the files, I moved it to another folder, but I will try to extract it. EDIT 2: The ATI4500Controller isn't in the Combo Update 10.6.6 Link to comment Share on other sites More sharing options...
wmarsh Posted January 27, 2011 Author Share Posted January 27, 2011 sudo kextutil -v /System/Library/Extensions/ATIRadeonX2000.kext Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeDirectory /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeRequirements /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeResources /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeSignature /System/Library/Extensions/ATIRadeonX2000.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/ATIRadeonX2000.kext. /System/Library/Extensions/ATIRadeonX2000.kext successfully loaded (or already loaded). I've some problems with X2000 EDIT: Now I'm re-downloading the combo 10.6.6 to extract the ATI's files. Anyway I didn't delete the files, I moved it to another folder, but I will try to extract it. If you moved them to another folder, you could more quickly and easily just move them back. (In fact I had done the same thing) Assuming you moved them to folder /10.6.6 (my convention) and you already have RadeonHD.kext in /S/L/E Open terminal sudo bash (enter your password) cd /10.6.6 mv -R ./*.kext /System/Library/Extensions cd /System/Library/Extensions chmod -R 755 ./*.kext chown -R root:wheel ./*.kext touch /System/Library/Extensions shutdown -r now Give me another kextutil -v after it reboots Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 Exactly the same. I fixed permissions before with Kext Utility. Link to comment Share on other sites More sharing options...
wmarsh Posted January 27, 2011 Author Share Posted January 27, 2011 Exactly the same. I fixed permissions before with Kext Utility. Given you have a different dev id, it could be you are not supported yet But given your dev id is in the info.plist for ATI4500Controller.kext, it could be that is conflicting with RadeonHD.kext, and duplicate symbols are occurring, so the sym links are not happening. Why don't you give us kextutil -v for: RadeonHD.kext ATI4500Controller.kext ATIRadeonX2000.kext Then try moving only ATI4500Controller.kext out of /S/L/E rebooting with -f -v And tell us what happens Link to comment Share on other sites More sharing options...
hjs89 Posted January 27, 2011 Share Posted January 27, 2011 BEFORE sudo kextutil -v /System/Library/Extensions/ATIRadeonX2000.kext Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeDirectory /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeRequirements /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeResources /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeSignature /System/Library/Extensions/ATIRadeonX2000.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/ATIRadeonX2000.kext. /System/Library/Extensions/ATIRadeonX2000.kext successfully loaded (or already loaded). sudo kextutil -v /System/Library/Extensions/RadeonHD.kext Password: /System/Library/Extensions/RadeonHD.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/RadeonHD.kext. /System/Library/Extensions/RadeonHD.kext successfully loaded (or already loaded) sudo kextutil -v /System/Library/Extensions/ATI4500Controller.kext Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /System/Library/Extensions/ATI4500Controller.kext/Contents/CodeDirectory /System/Library/Extensions/ATI4500Controller.kext/Contents/CodeRequirements /System/Library/Extensions/ATI4500Controller.kext/Contents/CodeResources /System/Library/Extensions/ATI4500Controller.kext/Contents/CodeSignature /System/Library/Extensions/ATI4500Controller.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/ATI4500Controller.kext. (kernel) kxld[com.apple.kext.ATI4500Controller]: The following symbols are unresolved for this kext: (kernel) kxld[com.apple.kext.ATI4500Controller]: __ZN12ATIConnector14getActivePanelEv (kernel) kxld[com.apple.kext.ATI4500Controller]: __ZN12AtiHdcpProxy7restoreEv (kernel) kxld[com.apple.kext.ATI4500Controller]: __ZN13ATIController10getHdcpForEh (kernel) kxld[com.apple.kext.ATI4500Controller]: __ZN20DisplayPortUtilities18getInterruptSourceEb (kernel) kxld[com.apple.kext.ATI4500Controller]: __ZN20DisplayPortUtilities4initEP18ConnectionServicesPK13ConnectorInfoh (kernel) kxld[com.apple.kext.ATI4500Controller]: __ZN20DisplayPortUtilities8setPanelEP8ATIPanel (kernel) Can't load kext com.apple.kext.ATI4500Controller - link failed. (kernel) Failed to load executable for kext com.apple.kext.ATI4500Controller. (kernel) Kext com.apple.kext.ATI4500Controller failed to load (0xdc008016). (kernel) Failed to load kext com.apple.kext.ATI4500Controller (error 0xdc008016). Failed to load /System/Library/Extensions/ATI4500Controller.kext - (libkern/kext) link error. Failed to load /System/Library/Extensions/ATI4500Controller.kext - (libkern/kext) link error. Check library declarations for your kext with kextlibs(8). AFTER sudo kextutil -v /System/Library/Extensions/ATIRadeonX2000.kext Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeDirectory /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeRequirements /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeResources /System/Library/Extensions/ATIRadeonX2000.kext/Contents/CodeSignature /System/Library/Extensions/ATIRadeonX2000.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/ATIRadeonX2000.kext. /System/Library/Extensions/ATIRadeonX2000.kext successfully loaded (or already loaded). sudo kextutil -v /System/Library/Extensions/RadeonHD.kext /System/Library/Extensions/RadeonHD.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/RadeonHD.kext. /System/Library/Extensions/RadeonHD.kext successfully loaded (or already loaded). sudo kextutil -v /System/Library/Extensions/ATISupport.kext Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /System/Library/Extensions/ATISupport.kext/Contents/CodeDirectory /System/Library/Extensions/ATISupport.kext/Contents/CodeRequirements /System/Library/Extensions/ATISupport.kext/Contents/CodeResources /System/Library/Extensions/ATISupport.kext/Contents/CodeSignature /System/Library/Extensions/ATISupport.kext appears to be loadable (not including linkage for on-disk libraries). Loading /System/Library/Extensions/ATISupport.kext. /System/Library/Extensions/ATISupport.kext successfully loaded (or already loaded). Link to comment Share on other sites More sharing options...
br492 Posted January 28, 2011 Share Posted January 28, 2011 I believe that with all those things above we are close to have new MacBooks with ati/amd graphics Link to comment Share on other sites More sharing options...
wmarsh Posted January 28, 2011 Author Share Posted January 28, 2011 HJS89, I guess you found your ATI4500Controller.kext You all were right to be skeptical. I tried Front Row and got the black screen But alot of things work that did not work before, and we are alot closer. Link to comment Share on other sites More sharing options...
Ccc Posted January 28, 2011 Share Posted January 28, 2011 Excellent idea. My HD4330 is 256MB and Ccc is 512MB. They may have different device ids. Mine is (0x95521002) My graphic card is 512Mb, and the same as yours, 0x95521002 Link to comment Share on other sites More sharing options...
Recommended Posts