Jump to content

DSDT Auto-Patcher

MaLd0n

By MaLd0n,
in Patches

 Share
5,753 posts in this topic

Recommended Posts

MaLd0n
MaLd0n
Posted
  • Author
Posted
The screen before was without GenerateC/PStates, this now is with GenerateC/PStates...

ok

;)

 

Dell Studio 14z

Extract DSDT from Windows

 

please help me to fix mine :)

your DSDT is not original

 

thanks for your effort you are a great man

but i have a problem with that DSDT i have in Latitude E5500 4 USB ,2 on each side after i put that dsdt i lost my two USB on the right side of the laptop

dsdt.T_A_Z_02.zip

the ideal is always sending me the original DSDT

your DSDT is not original

Link to comment
Share on other sites
bmas
bmas
Posted
Posted
ok

;)

So have you got some guess why my hacky wake from sleep with full power without GenerateC/PStates, but if I use GenerateC/PStates, when wake from sleep, the PC performance is terrible .. (2-3-4 times lower than before sleep)..

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
So have you got some guess why my hacky wake from sleep with full power without GenerateC/PStates, but if I use GenerateC/PStates, when wake from sleep, the PC performance is terrible .. (2-3-4 times lower than before sleep)..

wait for solution

Link to comment
Share on other sites
ninditsu
ninditsu
Posted
Posted

could you help patch my dsdt?

I'm really lost when it comes to this.

thanks

 

attached is an everest report of the system and the dsdt bin file that is extracted from everest

 

I don't know if it's necessary, but i should mention that in Lion install, along with PCI Configuration Begin fix,

i get stuck at

nstat_lookup_entry failed: 2

nstat_lookup_entry failed: 2

 

during boot

dsdt_report_everest_ninditsuBro.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
My point was to ask you as you have a lot of practise, is this massive or DSDT problem or you suppose is something else .. ? ;)

I believe that is not in DSDT

a lot going on at the same time

let's wait a bit

Link to comment
Share on other sites
cjhmdm
cjhmdm
Posted
Posted
dsdt.cjhmdm.zip

do you use USB RollBack

 

AppleUSBOHCI ???? :wacko:

 

First and foremost.. thanks a ton for the patched dsdt.. I'll try it out in a few and let you know how it goes.

 

As of right now, the only modifications aside from the bootloader that I've made are edits to NVDAGF100Hal.kext to get my video card working, and a modified IONetworkingFamily.kext to get my net working.

 

Only thing in my Extra/Extensions folder is FakeSMC.kext

 

Is there something more I need to do in order to get my onboard usb working properly again?

 

EDIT: Ok, I've booted up with the dsdt you attached without issue. My onboard usb is working again as well.

 

The only thing that doesn't seem to work as of now is any temperature monitoring. So far I've tried

Desktop Monitor - everything but temperature displays.

smcFanControl - crashes when I try to run it.

iStat menus - Doesn't display temperatures either.

 

Does this have to do with the dsdt, or is there something else I need to do in order to get temperature monitoring to work? If I recall correctly, when i had SL installed, iStst Menus worked without issue and displayed proper temps.

 

Thanks again for the help thus far, I really appreciate it :)

Link to comment
Share on other sites
cyrusza
cyrusza
Posted
Posted

Hi MaLd0n,

could you help me with my DSDT?

 

My system is a Dell Inspiron 6400 with a Core 2 Duo T5600 (Merom) and 2GB RAM . This is my "lspci -nn":

 

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)

00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01)

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145]

03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)

03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]

03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)

03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)

03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)

0b:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)

 

Some bios info:

 

BIOS Information

Vendor: Dell Inc.

Version: A17

Release Date: 06/13/2007

Address: 0xF0000

Runtime Size: 64 kB

ROM Size: 576 kB

Characteristics:

ISA is supported

PCI is supported

PC Card (PCMCIA) is supported

PNP is supported

BIOS is upgradeable

BIOS shadowing is allowed

Boot from CD is supported

Selectable boot is supported

3.5"/720 KB floppy services are supported (int 13h)

Print screen service is supported (int 5h)

8042 keyboard services are supported (int 9h)

Serial services are supported (int 14h)

Printer services are supported (int 17h)

CGA/mono video services are supported (int 10h)

ACPI is supported

USB legacy is supported

AGP is supported

Smart battery is supported

BIOS boot specification is supported

Function key-initiated network boot is supported

Targeted content distribution is supported

BIOS Revision: 1.7

Firmware Revision: 1.7

 

Thank you!

DSDT.dsl.zip

Link to comment
Share on other sites
agrajag
agrajag
Posted
Posted

On the topic of the EP35-DS3L I ran the DSDT Auto Patcher and got the following error messages:

[Line 463 type Error message Object does not exist (\_SB.PCI0.PX40.AG3E)]

[Line 469 type Error message Object does not exist (\_SB.PCI0.PX40.AG3E)]

[Line 473 type Error message Object does not exist (\_SB.PCI0.SBUS.DISB)]

[Line 478 type Error message Object does not exist (\_SB.PCI0.SBUS.ENAB)]

[Line 630 type Error message Object not found or not accessible from scope ( SBUS.ENAB)]

[Line 1254 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1255 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1256 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1257 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1258 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1259 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1260 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1261 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1266 type Error message Object not found or not accessible from scope ( SBUS.SWRB)]

[Line 1273 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1279 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1281 type Error message Object not found or not accessible from scope ( SBUS.SWRB)]

[Line 1285 type Error message Object not found or not accessible from scope ( SBUS.SRDB)]

[Line 1994 type Error message Name already exists in scope (LPC0)]

[Line 1997 type Error message Name already exists in scope (AG3E)]

 

I had removed the DSDT I was using and rebooted- the one I have was made a long time ago by hand patching things slowly (when DSDT patching was pretty new). I was hoping a new one might make sleep work on my system (right now it reboots upon wake).

 

On the topic of the EP35-DS3L I ran the DSDT Auto Patcher and got the following error messages:

 

Here is the "send me" file-

send_me.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
...

http://www.insanelymac.com/forum/index.php?showtopic=247185

http://www.projectosx.com/forum/index.php?showforum=165

 

 

Dell Inspiron 6400

dsdt.cyrusza.zip

 

Could you help me take a look? I've a EP35-DS3L running on Lion but sleep doesn't seem to work at all.

DSDT is OK

dsdt.alvinblank.zip

 

On the topic of the EP35-DS3L I ran the DSDT Auto Patcher and got the following error messages:

your DSDT is not original

see the firts post

 

it's for Toshiba Portege R835-P56X (Intel i5-2410m+IntelHD)

dsdt.archintosh.zip

Link to comment
Share on other sites
amarullz
amarullz
Posted
Posted
Work like a charm :P I just need to change Name (_ADR, 0x00030000) to Name (_ADR, 0x00010000). Thanks man... Will try it on my Lion....

 

On Lion: Still No Signal on my display... can you help me??

 

Hi Mald0n, sorry I need your help again. :P

 

The DSDT patch for my NVIDIA G210 Work perfect for My SnowLeopard (Full QI/CE), but when I try it on my Lion The Display was still Blank/No Signal, then I try SL kext (NVDAResman + NVDANV50Hal) It work but I should delete GeForceGLDriver.bundle, Display + Resolution work, but no Hardware Acceleration offcourse. I already read in many thread that G210 was fully support in Lion (vanilla). Please Help me, is My DSDT had any wrong configurations?. I attach my DSDT.

DSDT.aml.zip

Link to comment
Share on other sites
NemU
NemU
Posted
Posted
sorry i was trying :D but not expert at all

here is the original from windows :D

 

Hi MaLd0n

is there is way to fix mine?

thank you for huge e fortes and great tools, i'm only not expert asking pros here

i uploaded the default one for you after update to last online bios

thanks

Def_DSDT.zip

Link to comment
Share on other sites
Nesrednug
Nesrednug
Posted
Posted

Hello MaLd0n, Thanks for your awesome guide. Lion is up and running on my Asus G50vt-X1. Only problem is, there is no listing for this laptop in the auto patcher for the DSDT... Would you mind creating one when you have a chance?

 

I have attached the send_me file..

 

Thanks so much..

send_me.zip

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...