Jump to content

DSDT Auto-Patcher


MaLd0n
 Share

5,753 posts in this topic

Recommended Posts

Hi, MaLd0n!

 

Good Day!

 

Would You can help me with my DSDT?

send_me.zip

 

Thanks!!!

 

Good Day!

 

MaLd0n, Could You help me with my DSDT?

 

Hi, MaLd0n!

 

Good Day!

 

Would You can help me with my DSDT?

send_me.zip

 

Thanks!!!

Link to comment
Share on other sites

hello m8t thanks for the reply my audio chipset is alc269 also for some reason when i shutdown or restart it wont power off now not a big deal to me it goes through the process of shutting down ... killing process ect but never powers off ..... im not sure what that is but realy not a proity to me the pc runs so much smother now thanks for all your help

 

best regards

Burn

 

I just did a combo update to 10.6.8 and the Hacintosh is dead at the moment...

 

booting stops at "PCI Configuration Begin"

 

See a lot of people have the same problem.. let me solve it and then I will resend you the DSDT..

thanks again

 

 

try booting with the boot flags -v -f arch=i386 PCIRootUID=1 see if it gets past that

Link to comment
Share on other sites

1- the charger is connected?

try without it

 

2- do you add in boot.list?

<key>GeneratePStates</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>

 

send me a new kextstat

run on terminal

 

Hi mald0n, thank you for replying. If i connect or disconnect the power supply it is the same: 3300 geekbench . If i reboot it gives me 5200 . If i power it off, first time i boot 3300 geekbench, otherwise rebooting 5200. Do you know why? I have such strings (GenerateCStates and GeneratePStates). Adding dropSSDT=Yes or No it has the same behaviour. Most important problem is that it doesn't awake from sleep. The rest works fine.

 

Here is kextstat. I made two of them : with 3300 and 5200 geekbench(before and after reboot).

kextstat_sten0_3300geek.txt

 

kextstat_sten0_5200geek.txt

Thank you

Sn

Link to comment
Share on other sites

dear mr. maLd0n,

 

plz i need a dsdt.aml for my

 

Acer Aspire 5940G

- Prozessor: Intel Core i7-720QM, 1,6 - 2,8 GHz

- Grafik: ATI Mobility Radeon HD 4650, 1024 MByte DDR3

- Anzeige: 15.6-Zoll, 1366 x 768, 720p, nicht entspiegelt, Typ LP156WH2-TLE1

- Arbeitsspeicher: 8 GByte RAM DDR- Festplatte: 256 GByte SSD, Crucial C300

- Optisches Laufwerk: LG HL-DT-ST GT30N

- Funk: WLAN a/g/n, Broadcom

- Anschlüsse: 3x USB 2.0, Gb LAN, WLAN 802.11abgn, eSATA, HDMI, FireWire, ExpressCard/54 Slot, 6in1 Card Reader (SD/MMC/MMC Plus/MS/MS Pro/xD)

 

running Mac OSX 10.6.8

 

maybe with patch for applehda (alc 269, 0x3b568086), because voodoohda dont sound very well :pirate2:

 

thanx in advance for your help

 

regards

Link to comment
Share on other sites

dear mr. maLd0n,

 

plz i need a dsdt.aml for my

 

Acer Aspire 5940G

- Prozessor: Intel Core i7-720QM, 1,6 - 2,8 GHz

- Grafik: ATI Mobility Radeon HD 4650, 1024 MByte DDR3

- Anzeige: 15.6-Zoll, 1366 x 768, 720p, nicht entspiegelt, Typ LP156WH2-TLE1

- Arbeitsspeicher: 8 GByte RAM DDR- Festplatte: 256 GByte SSD, Crucial C300

- Optisches Laufwerk: LG HL-DT-ST GT30N

- Funk: WLAN a/g/n, Broadcom

- Anschlüsse: 3x USB 2.0, Gb LAN, WLAN 802.11abgn, eSATA, HDMI, FireWire, ExpressCard/54 Slot, 6in1 Card Reader (SD/MMC/MMC Plus/MS/MS Pro/xD)

 

running Mac OSX 10.6.8

 

maybe with patch for applehda (alc 269, 0x3b568086), because voodoohda dont sound very well :P

 

thanx in advance for your help

 

regards

 

lol seems most cor i7 macs laptops run the same chipset alc269 i need the patch also

Link to comment
Share on other sites

Intel DH67GD

dsdt.Mac_Smi.zip

 

 

Can't get sound to work on Gigabyte Z68X-UD3-b3 F5 Snow leopard 10.6.8

send me original DSDT, extract from Windows

Audio codec?

 

MaLd0n, Could You help me with my DSDT?

send me again

fails

 

audio chipset is alc269 also for some reason when i shutdown or restart it wont power off now not a big deal to me it goes through the process of shutting down ... killing process ect but never powers off

Very strange

try it

dsdt.LinearBurn.zip

I add ALC269 and old OS patching

 

If i connect or disconnect the power supply it is the same

for sleep problem

remove and test

 

Acer Aspire 5940G

dsdt.nai22.zip

remove EvOreboot

 

 

 

...

I have no idea

Update your Chameleon, etc

Link to comment
Share on other sites

I have no idea

Update your Chameleon, etc

 

I have latest chimera from tonymac.

 

I'm using iatkos 10.6.3 updated to 10.6.8 through software updates and almost everything is okay (sleep isn't).

 

I installed retail once but i had to boot with sata mode (ahci works with iatkos i don't understand why it doesn't with retail dvd) and once installed when it loaded the screen was grey and nothing happened that's why i use iatkos :wacko:.

Link to comment
Share on other sites

I have latest chimera from tonymac.

 

I'm using iatkos 10.6.3 updated to 10.6.8 through software updates and almost everything is okay (sleep isn't).

 

I installed retail once but i had to boot with sata mode (ahci works with iatkos i don't understand why it doesn't with retail dvd) and once installed when it loaded the screen was grey and nothing happened that's why i use iatkos ;).

very strange

hope you find a solution

Link to comment
Share on other sites

7/20/11 4:00:38.000 PM kernel: Kernel is LP64

7/20/11 4:00:41.000 PM kernel: Sound assertion "0 != result" failed in AppleHDADriver at line 883 goto Exit

7/20/11 4:00:41.000 PM kernel: Sound assertion "!me->fKextResourceLoaded" failed in AppleHDADriver at line 858 goto Exit

7/20/11 4:00:41.000 PM kernel: com_lnx2mac_RealtekRTL81xx: Ethernet address f4:6d:04:35:80:6c

7/20/11 4:00:41.000 PM kernel: AirPort_AthrFusion21: Ethernet address e0:b9:a5:84:16:77

7/20/11 4:00:41.000 PM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification

7/20/11 4:00:41.000 PM kernel: IO80211Interface::efiNVRAMPublished():

7/20/11 4:00:41.000 PM kernel: ATHR: unknown locale: 60

7/20/11 4:00:41.000 PM kernel: NTFS driver 3.8 [Flags: R/W].

 

So close only 2 errors now one i think is the actual error and the second is just a kext being rejected is there any way to define the local as 0x0 in the dsdt?

 

 

thanks for all your help

 

Burn

Link to comment
Share on other sites

for sleep problem

remove and test, etc

 

Hello . I tried to remove power supply and to put it again: same problem . It sleeps fine but it doesnt' awake (black screen). I had to modify rtc section of your dsdt because it did reset cmos anyway , but it's the same: no awake from sleep.

Any suggestion for sleep? Any other test?

Thank you

Sn0

Link to comment
Share on other sites

dose anyone have a applehda from retail Lion GM? i couldnt find mine so i had to use the one form 10.6.8

 

Hello . I tried to remove power supply and to put it again: same problem . It sleeps fine but it doesnt' awake (black screen). I had to modify rtc section of your dsdt because it did reset cmos anyway , but it's the same: no awake from sleep.

Any suggestion for sleep? Any other test?

Thank you

Sn0

 

 

have you tryed updating chemilian and using like forcewake=yes or playing with the c states

Link to comment
Share on other sites

 

 

thanks m8t ill look in to it keep yea posted

 

that post is in a nother lauange i did a google translate but it reads like this

 

Who used the AppleHDA kext legacy for the Snow Leopard will realize that this method does not work at the Lion, because the structure was modified kext. AppleHDA See how to edit the original Lion based on legacy kext you used in Snow Leopard: Open Info.plist legacy for the Snow Leopard; Copy keys CommonPeripheralDSP and PathMaps for the file AppleHDA.kext / Contents / Resources / Platforms.xml (replace the original content) Copy the keys LayoutID and PathMapRef (from inside the key layouts ) for the file AppleHDA.kext / Contents / Resources / layout ? . xml (replace the original content or create a new file if it does not exist ? = LayoutID) Copy the key HDA Resource Hardware Setup for the file AppleHDA.kext / Contents / PlugIns / AppleHDAHardwareConfigDriver.kext / Contents / Info.plist (replace the key with the same name.) Editing Info.plist viewtopic.php? f = 3 & t = 69 If not ALC889A codec AD1988B or you also need to edit the file AppleHDA.kext / Contents / MacOS / AppleHDA (binary). For Realtek codecs (ALC) replace the 4 occurrences of EC 10 85 08 (0885 bytes reversed the codec vendor and 10EC) for its codec, for example, 8 8 08 EC 10 . Use a hex editor ( 0xED ) or the command

 

not realy shure what he is getting at

Link to comment
Share on other sites

my problem was only my aspire was too hot by the time, but now it seems to fixed with the created dsdt.aml

there is no power management without LPC

 

 

thanks m8t ill look in to it keep yea posted

http://www.insanelymac.com/forum/index.php...t&p=1702398

complete GUIDE

http://olarila.com/forum/viewtopic.php?f=17&t=212#p1712

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...