plsh2me Posted June 15, 2011 Share Posted June 15, 2011 what is the motherboard? Chipset? ... Hi, My laptop is Toshiba Satellite M505-s4945 and its motherboard manufacturer is TOSHIBA. Also please find the output of Chipset Identification utility below: Detected Chipset: Mobile Intel® GM45 Express Chipset (Processor Intel® Core2 Duo CPU T6500 @ 2.10GHz, 2100 Mhz, 2 Core(s), 2 Logical Processor ) Chipset Components Memory Controller: Mobile Intel® 82GM45 Graphics and Memory Controller Hub (GMCH) I/O Controller: Intel® 82801IMB Intel® I/O Controller Hub (ICH9M- SATA Controller found in AHCI mode Integrated Graphics: This chipset supports integrated graphics. FYI: Processor detail can be found here: http://ark.intel.com/Product.aspx?id=39311 My system configuration can be found here: http://us.toshiba.com/computers/laptops/sa...500/M505-S4945/ Link to comment Share on other sites More sharing options...
MaLd0n Posted June 15, 2011 Author Share Posted June 15, 2011 My laptop is Toshiba Satellite M505-s4945 dsdt.plsh2me.zip Link to comment Share on other sites More sharing options...
TJRIVERA Posted June 15, 2011 Share Posted June 15, 2011 Thanks for all your help! but now i get this panic Panic(cpu 0 caller 0xffffff80002c3015): "should have 8 threads, but only found 7 for Die 1"@/sourceCache/xnu/xnu-1504.9.37/osfmk/i386/cpu-threads.c:1141 I have searched but no luck! Any ideas? Link to comment Share on other sites More sharing options...
plsh2me Posted June 15, 2011 Share Posted June 15, 2011 dsdt.plsh2me.zip Thank you very much great man. Link to comment Share on other sites More sharing options...
ebuyc Posted June 15, 2011 Share Posted June 15, 2011 MaLd0n - great job on all this! Pre - snow everything pretty much worked out of box except video with a G31M-ES2L or G31M-S2L mobo for me. With the DSDTautopatcher I was able to get sleep working without any sleep enablers - that is pretty cool! But I am confused on the audio w/DSDT, in the past seems like I needed an HDAenabler in e/e and or alc.. kext for non DSDT solutions... I don't live and breath this stuff, so in and out kinda thing for me. So questions: 1) I see the Alc833 section in the DSDT and system profile reports audio hardware, but no hardware in the System Preferences. Why? 2) I see the 'binary patch' command in the guide and wonder if this is for the 10.6.7 appleHDA.kext? From what I have read after 10.6.2 the device ids were hard coded - so am I correct to assume the perl command fixes the 10.6.7 appleHDA.kext then? 3) Am I supposed to have a specific Alc883 kext too? 4) What can I do to trouble shoot? I tried to just 'patch' the 10.6.7 appleHDA.kext as described in the post..... I have tried the 10.6.2 appleHDA.kext (s/l/e) repaired permissions... I tried an old HDAenabler.kext in e/e..... I tried a legacyALC883.kext with HDAenabler.... pretty much tried everything that I can think of. Seems like it should work since the DSDT made the hardware show in the system profile. Is it possible the DSDT is setting something wrong? Seems to me it is something else, but I am missing something I think. I opened the DSDT for editing and the HDEF section looks right when compared with the articles and even the patch that comes with DSDTEditor... I did notice a couple audio errors go by at the end of boot with verbose. But went too quick for me to see... Thanks for all your great work and taking the time to explain how things should be now! Helping others equates to spreading love to me... Edit: I gave up and removed appleHDA.kext and install voodoo 0.2.72 and received an error "Can't map memory." The audio works now but have to drop microphone gain all the way to get rid of background noise. I would much rather "1- You need a HDEF + LegacyHDA + AppleHda patched," but I guess I don't have the correct Alc833.kext to make this work... Anyone have a working Alc833.kext available for me??? Please and thank you. The audio guide linked is hard to follow - I have read it twice now and I really wonder what "To be continued..." means. I uploaded my send_me.zip and the legacyAlc833.kext that doesn't work for me. MaLd0n, another question please; what is the AHCIPortInjector.kext for and is it needed for my mobo? Thanks again for your quick response! send_me.zip LegacyALC883.kext.zip Link to comment Share on other sites More sharing options...
ninditsu Posted June 15, 2011 Share Posted June 15, 2011 Laptop Specs are in my sigBIOS: InsydeH2O version F. 0A | Rev.3.5 To install Mac OS X, I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Legacy from tonymacx86 and my retail 10.6.3 disc and to retain boot, I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.4 and installing these packages: *[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] *Chameleon 2 RC5 with Sandy Bridge by valv the list of kexts are in the send me zip Note: my motherboard chipset is intel hm65 running 10.6.3 snow leopard here is the send_me.zip sorry forgot to upload i have posted one before, but i feel that my dsdt was created improperly, due to my method of installation, this dsdt in the send_me zip comes from windows and extracted via Everest thanks for all your work send_me.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 15, 2011 Author Share Posted June 15, 2011 Thanks for all your help! but now i get this panic Panic(cpu 0 caller 0xffffff80002c3015): "should have 8 threads, but only found 7 for Die 1"@/sourceCache/xnu/xnu-1504.9.37/osfmk/i386/cpu-threads.c:1141 I have searched but no luck! Any ideas? Very Strange I have no idea sorry 1) I see the Alc833 section in the DSDT and system profile reports audio hardware, but no hardware in the System Preferences. Why? 2) I see the 'binary patch' command in the guide and wonder if this is for the 10.6.7 appleHDA.kext? From what I have read after 10.6.2 the device ids were hard coded - so am I correct to assume the perl command fixes the 10.6.7 appleHDA.kext then? 3) Am I supposed to have a specific Alc883 kext too? 4) What can I do to trouble shoot? 1- You need a HDEF + LegacyHDA + AppleHda patched 2- Yep 3- Yep 4 - http://www.projectosx.com/forum/index.php?showtopic=465 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2011 Author Share Posted June 16, 2011 i have posted one before, but i feel that my dsdt was created improperly, due to my method of installation,this dsdt in the send_me zip comes from windows and extracted via Everest thanks for all your work You need a 10.6.8 wait dsdt.ninditsu.zip Link to comment Share on other sites More sharing options...
ninditsu Posted June 16, 2011 Share Posted June 16, 2011 You need a 10.6.8wait dsdt.ninditsu.zip i was right then i guess, for thinking i should just wait for lion or something. may i ask what patches have been made here? Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2011 Author Share Posted June 16, 2011 may i ask what patches have been made here? DTGP HDEF IRQs EHCI LPC HPET FN KEYS PNLF RTC SMBUS SHUTDOWN AR9285 FIX WARNINGS Link to comment Share on other sites More sharing options...
elpekos Posted June 16, 2011 Share Posted June 16, 2011 DSDT auto patcher generates a buggy DSDT for my G31M-ES2L under Lion. When using the generic profile it works (with nullcpuPM.kext). The boot stops during (PCI configuration). Any idea ? Thanks for your help. Link to comment Share on other sites More sharing options...
nexus77777 Posted June 16, 2011 Share Posted June 16, 2011 Original DSDT from DSDT Patcher from 10.6.2 I wil post the one from Win too... Hi MaLd0n, Still in test... seems there is a trouble with ALC883 cause I re-intall properly ans have now "sound insertions"... with exactly same files/version... AppleHDA 1.79 Arf... don't understand what happend... Otherwise what part of your code enable the intel 8255x in DSDT ? Thanks... ALC883_LegacyHDA_SnowLeopard.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2011 Author Share Posted June 16, 2011 The boot stops during (PCI configuration). Any idea ? http://www.insanelymac.com/search.php?cx=0...ation+lion#1024 seems there is a trouble with ALC883 cause I re-intall properly ans have now "sound insertions"... with exactly same files/version... AppleHDA 1.79 http://www.insanelymac.com/forum/index.php?showtopic=140941 Link to comment Share on other sites More sharing options...
nexus77777 Posted June 16, 2011 Share Posted June 16, 2011 http://www.insanelymac.com/search.php?cx=0...ation+lion#1024 http://www.insanelymac.com/forum/index.php?showtopic=140941 Ok, I will try to fix this... Otherwise what part of your code enable the intel 8255x in DSDT ? Thanks... Link to comment Share on other sites More sharing options...
Ryanp4444 Posted June 16, 2011 Share Posted June 16, 2011 Please can you work your magic and make me a DSDT for my acer aspire 5738g(i dont think I can use the pre made z or zg ones). I have attached the sendme.zip and can send any other files you need. Running retail 10.6.3 upgraded to 10.6.7 if needed and not stated in the attachment Thankyou Ryan EDIT: When I shut down or reboot, it powers off but then hangs for 10ish seconds before cutting power. Sleep doesn't work, screen goes of as does HDD etc... but it wont wake, no matter what I try.... Not sure if any of that is DSDT related... my R.A.T 5 mouse also needs to be unplugged and replugged in after a reboot or shutdown for advanced features(custom buttons etc) to work(general pointer and left right click works before replug).... ty again Also, one USB port doesn't work but not sure why or how to tell what one it is(its the front left one if it helps but i doubt it does).... send_me.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2011 Author Share Posted June 16, 2011 acer aspire 5738g dsdt.Ryanp4444.zip DTGP EHCI FN KEYS HPET IRQs LPC PNLF SMBUS HDEF UHCI FIX WARNINGS remove EvOreboot and NullCPUPowerManagement add in boot.plist <key>GeneratePStates</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> use AppleHDADisabler in System/Library/Extensions Otherwise what part of your code enable the intel 8255x in DSDT ? I Have no idea Link to comment Share on other sites More sharing options...
plsh2me Posted June 16, 2011 Share Posted June 16, 2011 Hi, I had loaded DSDT, but fan yet running with speed. Tried by adding <key>GeneratePStates</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> No change! Will you please revise my dsdt.aml. How could solve the problem? I am using (win 7 + Mac 10.6.7) - Dell inspiron N5010 i5 M460@2.53GHz Graphics: ATI Mobility Radeon HD 550v (not working) Broadcom: BCM 4313 802.11 b/g/n (not working) Bluetooth, sound, Ethernet - works. Thanks. dsdt_plsh2me.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2011 Author Share Posted June 16, 2011 Hi, I had loaded DSDT, but fan yet running with speed. http://prasys.info/2010/01/legacy-appleacp...leacpiec-kexts/ Link to comment Share on other sites More sharing options...
MacNB Posted June 16, 2011 Share Posted June 16, 2011 Hi MaLd0n, I cannot find a DSDT for the Acer 3820T in the list I started with 10.6.3 using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]+[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.7.2+ 10.8.0 Mach_kernel OS boots up OK. But OS thinks I have 8 cores but enables 4 ! The CPU is i5 430M and running very hot. Base OS OK but have a few issues. I also trying to get ATI 5470 working. I have installed new kexts from LION and got the LCD's display properties (via windows). I now have native resolution (1366x768) but the OS is not stable - Safari hangs on some web pages; iPhoto crashes; Front Row gives a black screen, Sleep KP's, etc. I cannot figure out the DSDT compared to my desktop hack - seems very different but I think it is key to getting this laptop working. Would appreciate some help with the DSDT. I used you RunMe.app to produce the attached zip. many thanks send_me.zip Link to comment Share on other sites More sharing options...
jeffc2009 Posted June 16, 2011 Share Posted June 16, 2011 MaLd0n, I have a Asus G73SW-XT1 with 10.6.7. Can you help with my dsdt.aml? Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2011 Author Share Posted June 16, 2011 Acer 3820T in the list ACER Aspire 3820T?? MaLd0n, I have a Asus G73SW-XT1 with 10.6.7. Can you help with my dsdt.aml? send me files see the first post Link to comment Share on other sites More sharing options...
MacNB Posted June 16, 2011 Share Posted June 16, 2011 ACER Aspire 3820T?? Thanks for the quick reply. Yes it is the Acer Aspire 3820T. Spec: Notebook spec: CPU: i5 M430 @ 2.27Ghz (Dual core with Hyperthreading = four Logical CPU's) Chipset: HM55 RAM: 4GB DDR3 RAM Wi-Fi: Atheros AR5B93 LAN: Atheros AR8151 Audio: Realtek ALC269 (I think) Graphics: ATI 5470 and Intel HD (BIOScan be set to "switchable" or "discrete") Camera: Built-in to the lid. I attached the files in my post above. Link to comment Share on other sites More sharing options...
jeffc2009 Posted June 16, 2011 Share Posted June 16, 2011 Sorry, got it changed on the original post. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2011 Author Share Posted June 16, 2011 Thanks for the quick reply. Yes it is the Acer Aspire 3820T.Spec: Notebook spec: CPU: i5 M430 @ 2.27Ghz (Dual core with Hyperthreading = four Logical CPU's) Chipset: HM55 RAM: 4GB DDR3 RAM Wi-Fi: Atheros AR5B93 LAN: Atheros AR8151 Audio: Realtek ALC269 (I think) Graphics: ATI 5470 and Intel HD (BIOScan be set to "switchable" or "discrete") Camera: Built-in to the lid. I attached the files in my post above. dsdt.Paranoid1.zip NativePM and restart fix see the first post remove EvOreboot, NullCPUPowerManagement you remove AppleIntelCPUPowerManagement.kext? Link to comment Share on other sites More sharing options...
antipop2323 Posted June 17, 2011 Share Posted June 17, 2011 using the autopatcher for a ga-ep43-ud3l, when waking from sleep i get an error message with my ssd drive that it wasn't ejected properly... any thoughts? Link to comment Share on other sites More sharing options...
Recommended Posts