eramoscas Posted May 12, 2011 Share Posted May 12, 2011 Dear MaLd0n, it did not work ... now the system does not start at all ... what I get is a grey screen with the apple logo in the middle of the page .... I am ready to start from scratch ... could you kindly suggest the best guide or way to do a plain new installation of the Mac OS .. I have a retail copy of the SL10.6.3. Thanks again for your help .. maybe is itbetter a new specifi Kernel ?? or a specific dsdt ?? or ?? ... In any case i can only say thanks for your time and patience.. http://lnx2mac.blogspot.com/p/realtekrtl81xx-osx-driver.html Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 This time USB bus shows up as BUILT-IN under system profiler. so i guess this is good, but when i put the system to sleep with the power button, and if click on the mouse or the keyboard the system wakes up but BLACK SCREEN like on standby. weird!!! you're out of luck the USBS were corrected I do not know how to solve the other problem Link to comment Share on other sites More sharing options...
mr_christer Posted May 12, 2011 Share Posted May 12, 2011 hey maldon i've been trying for hours now to understand dsdt but i'm not getting any closer with this: i have a lenovo z560 i5 2,26 ghz with 6gb ram with the wifi card exchanged to atheros ar5bxb6 i was able to extract the dsdt with everest in win 7 64bit that i attached to this post. the dsdt has some errors that i wasnt able to fix. right now i'm using the dsdt which is for a z560 i3 with 2gb ram from here it works well but sometimes i get kernel panics when starting up... thats why i'm trying to have my own custom dsdt. i also tried a dsdt from a z560 i5 (http://www.tonymacx86.com/download/file.php?id=6924) but this dsdt doesnt give me resolution change any help would be gladly appreciated! dsdt.aml.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 ... see the end of first post Link to comment Share on other sites More sharing options...
eramoscas Posted May 12, 2011 Share Posted May 12, 2011 sorry ??? ... kindly explain ... see the end of first post Link to comment Share on other sites More sharing options...
lukin Posted May 12, 2011 Share Posted May 12, 2011 you're out of luck the USBS were corrected I do not know how to solve the other problem Thanks so much for everything my friend. you did your best and i`m really grateful. you have all my respect!!! Link to comment Share on other sites More sharing options...
mr_christer Posted May 12, 2011 Share Posted May 12, 2011 wow this thread is active i should also mention that the dsdt i extracted from everest doesnt give me resolution change either... then i took the gfx0 part from the i3 dsdt and pasted it into my own dsdt but this didnt work for some reason Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 sorry ??? ... kindly explain ... you can follow one of my tutorials Lion installation via USB stick using Chameleon http://www.insanelymac.com/forum/index.php?showtopic=256729 Snow Leopard on Gigabyte Mobos / P55 and H55 / http://www.insanelymac.com/forum/index.php?showtopic=254309 Snow Leopard on GA P35-DS3 http://www.insanelymac.com/forum/index.php?showtopic=232678 Snow Leopard installation / Asus N53JQ http://www.insanelymac.com/forum/index.php?showtopic=251256 Thanks so much for everything my friend. you did your best and i`m really grateful. you have all my respect!!! Hey lukin You're Welcome hey maldoni've been trying for hours now to understand dsdt but i'm not getting any closer with this: i have a lenovo z560 i5 2,26 ghz with 6gb ram with the wifi card exchanged to atheros ar5bxb6 i was able to extract the dsdt with everest in win 7 64bit that i attached to this post. the dsdt has some errors that i wasnt able to fix. right now i'm using the dsdt which is for a z560 i3 with 2gb ram from here it works well but sometimes i get kernel panics when starting up... thats why i'm trying to have my own custom dsdt. i also tried a dsdt from a z560 i5 (http://www.tonymacx86.com/download/file.php?id=6924) but this dsdt doesnt give me resolution change any help would be gladly appreciated! update your System to 10.6.7 use GraphicsEnabler=Yes in boot.plist dsdt.chrishelms.zip Link to comment Share on other sites More sharing options...
mr_christer Posted May 12, 2011 Share Posted May 12, 2011 wow what a service seriously that was fast! thanks mate just installed it and everything works well. i used lizard and added the graphics injection! i wonder how the other guy got it working through dsdt... but whatever it also works with the enabler! thanks again mate you made my day! Link to comment Share on other sites More sharing options...
MaLd0n Posted May 12, 2011 Author Share Posted May 12, 2011 There are several ways to activate the video the result is the same Link to comment Share on other sites More sharing options...
Leopard1993 Posted May 13, 2011 Share Posted May 13, 2011 Hello mald0n can you patch my dsdt, this is my send_me.zip taken with run_me, the patched dsdt that you send me in the other topic doesn't work for me,and can you insert dsdt patch for radeon hd mobility by wmarsh?? Thank you for your work send_me.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2011 Author Share Posted May 13, 2011 insert dsdt patch for radeon hd mobility by wmarsh send me link Link to comment Share on other sites More sharing options...
psionicsin Posted May 13, 2011 Share Posted May 13, 2011 Ok, so I'm a BIT confused with this thread. It's very hard to follow with the first post being kind of all over the place. What exactly, out of what you've provided on the first post, do I need to properly patch the EVGA Classified SR-2 board? The specs for it are as follows btw: North Bridge: Intel 5520 Chipset South Bridge: Intel ICH10R Chipset Audio Chipset: Realtek ALC889 LAN Chipset: 2 x Marvell 88E8057 Triple Channel DDR3 w/ Maximum of 48GB of DDR3 1333MHz+ Also has support for USB 3.0 and SATA 6Gbp/s Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2011 Author Share Posted May 13, 2011 Ok, so I'm a BIT confused with this thread. It's very hard to follow with the first post being kind of all over the place. What exactly, out of what you've provided on the first post, do I need to properly patch the EVGA Classified SR-2 board? The specs for it are as follows btw: North Bridge: Intel 5520 Chipset South Bridge: Intel ICH10R Chipset Audio Chipset: Realtek ALC889 LAN Chipset: 2 x Marvell 88E8057 Triple Channel DDR3 w/ Maximum of 48GB of DDR3 1333MHz+ Also has support for USB 3.0 and SATA 6Gbp/s 1- Copy the Extra folder to your boot partition 2- Install Chameleon RC5 (in Snow Leopard or EFI partition) 3- Run DSDT Auto-Patcher and copy the generated DSDT to the Extra folder 4- Update the system to 10.6.7 Link to comment Share on other sites More sharing options...
psionicsin Posted May 13, 2011 Share Posted May 13, 2011 1- Copy the Extra folder to your boot partition2- Install Chameleon RC5 (in Snow Leopard or EFI partition) 3- Run DSDT Auto-Patcher and copy the generated DSDT to the Extra folder 4- Update the system to 10.6.7 Ok. Now can I still do the initial boot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], or am I bound to the boot CD you posted? And, also, I know that [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] takes care of SOME of the things in your post (like installing Chameleon and certain kext files for sound and USB drivers). Is it ok to use this for some things as long as we DON'T use it for the DSDT file? Or does DSDT Auto-Patcher provide most of these files? And I'm sorry loll, but I'm asking these questions because the more automated the process, the better it'll be for me lol. Link to comment Share on other sites More sharing options...
lukin Posted May 13, 2011 Share Posted May 13, 2011 Hi MaldOn! i don`t get anything when i run ioreg -lw0 | grep CSTInfo and when i run ioreg -lw0 | grep PerformanceStateArray, it`s different. Does it mean that maybe C states aren`t working. i enabled C-states in Bios. is it important to have C states working?. maybe THAT could fix my wake-from-sleep-not-working problem!, No? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2011 Author Share Posted May 13, 2011 Does it mean that maybe C states aren`t working. i enabled C-states in Bios. you have a problem without cst you added in boot.plist? <key>GenerateCStates</key> <string>Yes</string> Ok. Now can I still do the initial boot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], or am I bound to the boot CD you posted? And, also, I know that [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] takes care of SOME of the things in your post (like installing Chameleon and certain kext files for sound and USB drivers). Is it ok to use this for some things as long as we DON'T use it for the DSDT file? Or does DSDT Auto-Patcher provide most of these files? And I'm sorry loll, but I'm asking these questions because the more automated the process, the better it'll be for me lol. look it http://www.insanelymac.com/forum/index.php?showtopic=233891 use EXtra MacPro4,1 Link to comment Share on other sites More sharing options...
lukin Posted May 13, 2011 Share Posted May 13, 2011 I think yes...no problem without setting in boot.plist also here Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2011 Author Share Posted May 13, 2011 I think yes...no problem without setting in boot.plist also here The Dell default bios P-states work just fine, and the C-states do not work at all, so you do not need to generate P or C states. this may be your problem Link to comment Share on other sites More sharing options...
lukin Posted May 13, 2011 Share Posted May 13, 2011 this may be your problem so what do i do. i just go ahead and disable C states or what exactly? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2011 Author Share Posted May 13, 2011 so what do i do. i just go ahead and disable C states or what exactly? many DELL computers exhibit this problem can not solve I do not know solution Link to comment Share on other sites More sharing options...
lukin Posted May 13, 2011 Share Posted May 13, 2011 many DELL computers exhibit this problemcan not solve I do not know solution Thx for everything, you are a good man, MaldOn! Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2011 Author Share Posted May 13, 2011 Thx for everything, you are a good man, MaldOn! You can try a clean install but I do not know if it will work You can also manually add http://www.insanelymac.com/forum/index.php?showtopic=224878 Link to comment Share on other sites More sharing options...
Leopard1993 Posted May 13, 2011 Share Posted May 13, 2011 This is the dsdt patch for mobility radeon by wmarsh Click Here Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2011 Author Share Posted May 13, 2011 This is the dsdt patch for mobility radeon by wmarsh Click Here Jesus dsdt.Leopard1993.zip Update your system, use Chameleon and GraphicsEnabler=Yes Link to comment Share on other sites More sharing options...
Recommended Posts