Jump to content

DSDT Auto-Patcher

MaLd0n

By MaLd0n,
in Patches

 Share
5,753 posts in this topic

Recommended Posts

MaLd0n
MaLd0n
Posted
  • Author
Posted
Thanks a MaLd0n,

 

I just tested it. At first boot it seems to work fine, and the reboot works better than before, very quick.

The only thing I lost with this, is the native brightness control (With Fn + keys) which doesn't work anymore and now I can't find the new key combination to adjust it. Tried all function keys. Video card is a Nvidia G105M.

 

The CPU is still running hot and fan is always on... Speedstep doesn't work.

 

send me a new kextstat

 

try it

dsdt.La.zip

 

run on terminal too

ioreg -lw0 | grep CSTInfo

Link to comment
Share on other sites
clutchuser
clutchuser
Posted
Posted

Is this what you are asking me? If my CPU history is 12 cores. Yes its correct but the SMC monitor is not. see picture. And only half of my temps show up with 100% load on all cores in the thermal monitor window at the top right corner.

post-140160-1300058035_thumb.png

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Is this what you are asking me? If my CPU history is 12 cores. Yes its correct but the SMC monitor is not. see picture. And only half of my temps show up with 100% load on all cores in the thermal monitor window at the top right corner.

FahCore_a3.exe ?????? :unsure:

 

http://www.insanelymac.com/forum/index.php?showtopic=247185

Link to comment
Share on other sites
lalya
lalya
Posted
Posted
send me a new kextstat

 

try it

dsdt.La.zip

 

run on terminal too

ioreg -lw0 | grep CSTInfo

 

hi MaLd0n,

I pasted the terminal response here ---> http://pastebin.com/snGTf1HW

By the way... when I input "ioreg -lw0 | grep CSTInfo" in terminal,

it gives nothing, as result.

 

Tried your new dsdt, but I didn't notice anything new in the behaviour, compared to the 1st version.

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
hi MaLd0n,

I pasted the terminal response here ---> http://pastebin.com/snGTf1HW

By the way... when I input "ioreg -lw0 | grep CSTInfo" in terminal,

it gives nothing, as result.

 

Tried your new dsdt, but I didn't notice anything new in the behaviour, compared to the 1st version.

 

you added in boot.plist generate p and c states?

You are using what macmodel?

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
haha, FahCore_a3.exe = Folding @ Home. Its an application running in the background. its no problem.

Screen_shot_2011_03_13_at_6.55.54_PM.png

 

What is the fintek error about and how do I deal with it?

I do not know

use search forum

Link to comment
Share on other sites
lalya
lalya
Posted
Posted
you added in boot.plist generate p and c states?

You are using what macmodel?

Hi again MaLd0n,

I attach here my "com.apple.Boot.plist" and "smbios.plist" so that you can have a look on what i'm running. Chameleon is latest rc5 rev.747

Both files are in my Extra folder along as your previous dsdt

Link to comment
Share on other sites
URBANsUNITED
URBANsUNITED
Posted
Posted
dsdt.URBANsUNITED.zip]

 

you should not need the fix UHCI

 

Dear MaLd0n,

 

many thanks for your great support.

DSDT works like it should!

 

Btw. I tried it by myself and found the reason my my modded DSDT was not working.

After I switched to the AnVAL loader, everything was working fine also with mine.

The normal C2RC5-747 I was not able to get the powermanagement working proper.

 

I am happy!

 

Thanks

 

URBANsUNITED

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Hi again MaLd0n,

I attach here my "com.apple.Boot.plist" and "smbios.plist" so that you can have a look on what i'm running. Chameleon is latest rc5 rev.747

Both files are in my Extra folder along as your previous dsdt

smbios_MBP51.zip

 

Macpro = Desktop 4 or 8 Core

 

Dear MaLd0n,

 

many thanks for your great support.

DSDT works like it should!

 

Btw. I tried it by myself and found the reason my my modded DSDT was not working.

After I switched to the AnVAL loader, everything was working fine also with mine.

The normal C2RC5-747 I was not able to get the powermanagement working proper.

 

I am happy!

 

Thanks

 

URBANsUNITED

 

01a.png

Link to comment
Share on other sites
lalya
lalya
Posted
Posted
smbios_MBP51.zip

Macpro = Desktop 4 or 8 Core

Hi MaLd0n,

I have loaded the new smbios, and now after reboot I checked that the correct model is displayed in system info, which is MacBookPro 5,1

 

But how come, when I type again in termina ioreg -lw0 | grep CSTInfo

still nothing happens? :thumbsup_anim:

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Hi MaLd0n,

I have loaded the new smbios, and now after reboot I checked that the correct model is displayed in system info, which is MacBookPro 5,1

 

But how come, when I type again in termina ioreg -lw0 | grep CSTInfo

still nothing happens? :thumbsup_anim:

:blink:

 

try with AnVal

http://www.insanelymac.com/forum/index.php?showtopic=216726

 

or

 

add manually

Link to comment
Share on other sites
lalya
lalya
Posted
Posted
:(

 

try with AnVal

http://www.insanelymac.com/forum/index.php?showtopic=216726

 

or

 

add manually

What do you mean by "add manually" ?

Well, I just installed Anval5.1.4... It didn't give me any errors at the new boot, so I guess the installation went well, I followed the manual installation procedure on that page you gave me, where I downloaded the package.

 

Anyway, after this Anval installation, I rebooted (all okay) and ran again the command for C states, and it gave me NO results as before.

 

I noticed that only "ioreg -lw0 | grep PerformanceStateArray" reports me a string.

 

Anyway, the main problem now is the fact that I have absolutely no way to control lcd brightness... neither in the monitor preference panel... There's not even the slide to adjust brightness...

How can I solve this problem without going back to the state when I was not using any dsdt at all?

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
What do you mean by "add manually" ?

Well, I just installed Anval5.1.4... It didn't give me any errors at the new boot, so I guess the installation went well, I followed the manual installation procedure on that page you gave me, where I downloaded the package.

 

Anyway, after this Anval installation, I rebooted (all okay) and ran again the command for C states, and it gave me NO results as before.

 

I noticed that only "ioreg -lw0 | grep PerformanceStateArray" reports me a string.

 

Anyway, the main problem now is the fact that I have absolutely no way to control lcd brightness... neither in the monitor preference panel... There's not even the slide to adjust brightness...

How can I solve this problem without going back to the state when I was not using any dsdt at all?

http://www.insanelymac.com/forum/index.php?showtopic=236835

Link to comment
Share on other sites
lalya
lalya
Posted
Posted

Thanks...

but if now for example i want to add the kext GenericBrightness... since I have no slider at all

where do I have to put this kext, now that I installed the Anval Bootloader?

May I still put the kext in /Extra folder and repair permissions there? Or I must install it to S/L/E instead?

 

I thought that now my extra kexts are in the hidden EFI partition volume... :wacko:

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Thanks...

but if now for example i want to add the kext GenericBrightness... since I have no slider at all

where do I have to put this kext, now that I installed the Anval Bootloader?

May I still put the kext in /Extra folder and repair permissions there? Or I must install it to S/L/E instead?

 

I thought that now my extra kexts are in the hidden EFI partition volume... :wacko:

use topic

http://www.insanelymac.com/forum/index.php?showtopic=236835

ivik is the guy

01a.png

Link to comment
Share on other sites
lalya
lalya
Posted
Posted

Thanks for the info...

I've tried to contact the guy in charge with brightness but I dont count so much in a positive reply anyway.. but we will see! :D

 

I wanna take a secondo to ask you if u know how to uninstall this AnVal thing? May I just install Chameleon RC5 again and it will clean it ? :)

Link to comment
Share on other sites
LatinMcG
LatinMcG
Posted
Posted

AnVAL loader is mainly same as RC5 with a few changes. follow same steps in anval post to install other. mainly replace boot file in the root of booting partition.

 

also u might need the has embedded EC "Fn keys" trick in dsdt

Link to comment
Share on other sites
LatinMcG
LatinMcG
Posted
Posted
Both DSDTS files can't give working sleep. Tried AnVal Loader - no good. Will try qoopz kernel. If it won't help - I have no idea what to do. Maybe video needs patching.

 

it sleeps but returns black screen ? using RTGMac_2.0.x driver for lan ? i had same issue with RT8111E .. use Lnx2Mac driver. wake works with it.

Proof: http://www.insanelymac.com/forum/index.php...d=1655585

EDIT: researching your posts.. is see u use Broadcom BCM57780 LAN.

theres a driver for it by ADLAN.

Link to comment
Share on other sites
lalya
lalya
Posted
Posted
AnVAL loader is mainly same as RC5 with a few changes. follow same steps in anval post to install other. mainly replace boot file in the root of booting partition.

 

also u might need the has embedded EC "Fn keys" trick in dsdt

hey Latin...

can you maybe help me in trying to get this to work...? ;)

I attach my actual (but now lost in space... hidden in the EFI partition!) dsdt... (made by MadL0n - all the credit to him!)

if you have some spare time, maybe you can have a look on what might be wrong with brightness control, which is not usable?

dsdt.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Perhaps a stupid question, but I have a EP45-UD3L. Are all the installers for the EP45 series motherboards pretty much the same? I'm just having a hard time finding a guide for this particular motherboard.

Thanks.

look it

http://www.insanelymac.com/forum/index.php?showtopic=180954

follow it

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...