Jump to content

DSDT Auto-Patcher

MaLd0n

By MaLd0n,
in Patches

 Share
5,753 posts in this topic

Recommended Posts

filosofem
filosofem
Posted
Posted

hazard 10.6.6 default install. now those are removed. C-state error.

 

ACPI_SMC_PlatformPlugin::pushCPU_CSTData - _CST evaluation failedF718x: Fintek: Found unsupported chip ID=0xa5 REVISION=0x13

F718x: Fintek: Found unsupported chip ID=0xa5 REVISION=0x13

 

ACPI_SMC_PlatformPlugin::pushCPU_CSTData - _CST evaluation failed

ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power management not initialized

send_me.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
hazard 10.6.6 default install. now those are removed. C-state error.

 

ACPI_SMC_PlatformPlugin::pushCPU_CSTData - _CST evaluation failedF718x: Fintek: Found unsupported chip ID=0xa5 REVISION=0x13

F718x: Fintek: Found unsupported chip ID=0xa5 REVISION=0x13

 

ACPI_SMC_PlatformPlugin::pushCPU_CSTData - _CST evaluation failed

ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power management not initialized

 

see the first post

NativePowerManagement

Link to comment
Share on other sites
Andrew180
Andrew180
Posted
Posted

Hi MaLd0n. I need some help here. I have some sleep/shutdown problems with my new mobo.

 

When i put computer to sleep, it shuts down itself nicely but when i wake it up i have no signal in monitor. Also my USB keyboard/mouse are off but when i click on some mouse button, mouse wakes up... the same with the keyboard.

 

When i shut down PC, it shuts down fine too but when i turn it back on, nothing will happen for about 8 seconds, then it restarts itself and turn on normally.

 

All my USB ports are built-in, no orange SATA icon... I'm attaching my untouched and current DSDTs for reference.

 

Thanks!

dsdts_andrew.zip

Link to comment
Share on other sites
Fiox89
Fiox89
Posted
Posted

Hi man :(

A few days ago you helped me with the sound of my Asus p5k3 deluxe , now, I realized that maybe there are small problems, I do not know with certainty

 

localhost kernel[0]: Not loading kext com.apple.driver.AppleHDAController - not found and kextd not available in early boot.

this in my kernel.log

 

This is a problem or not? Thanks for all your epic work :)

 

p.s. 

MacPro-di-fiox:~ fiox$ ls /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/
[b]AppleHDAController.kext[/b]			AppleHDAPlatformDriver.kext		IOHDAFamily.kext
AppleHDAHALPlugIn.bundle		AppleMikeyDriver.kext
AppleHDAHardwareConfigDriver.kext	DspFuncLib.kext

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Hi MaLd0n. I need some help here. I have some sleep/shutdown problems with my new mobo.

 

When i put computer to sleep, it shuts down itself nicely but when i wake it up i have no signal in monitor. Also my USB keyboard/mouse are off but when i click on some mouse button, mouse wakes up... the same with the keyboard.

 

When i shut down PC, it shuts down fine too but when i turn it back on, nothing will happen for about 8 seconds, then it restarts itself and turn on normally.

 

All my USB ports are built-in, no orange SATA icon... I'm attaching my untouched and current DSDTs for reference.

 

Thanks!

 

you can teste?

 

dsdt.Andrew180.zip

 

Hi man :(

A few days ago you helped me with the sound of my Asus p5k3 deluxe , now, I realized that maybe there are small problems, I do not know with certainty

 

localhost kernel[0]: Not loading kext com.apple.driver.AppleHDAController - not found and kextd not available in early boot.

 

everything works fine?

Link to comment
Share on other sites
Macandcheese
Macandcheese
Posted
Posted

Hello MaLd0n, i have tried with little success getting my mobo to work with a modded dsdt. I found a post that really gave me some hope here (post 1100 in this thread), but still i am quite confused. I have included the send me.zip below. Currently when i try to sleep, the display immediately shuts off but the computer remains awake.

 

OSX 10.6.6 totally updated

 

Com.apple.boot.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Boot Graphics</key>
<string>Yes</string>
<key>Default Partition</key>
<string>hd(0,2)</string>
<key>EHCIacquire</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>idlehalt=0</string>
<key>Quiet Boot</key>
<string>No</string>
<key>Theme</key>
<string>Default</string>
<key>Timeout</key>
<string>5</string>
<key>UHCIreset</key>
<string>Yes</string>
<key>USBBusFix</key>
<string>yes</string>
</dict>

 

Extra/Extensions:

AHCIPortInjector.kext
Disabler.kext
ElliottForceLegacyRTC.kext
EvOreboot.kext
fakesmc.kext
LegacyIOAHCIBlockStorage.kext
NullCPUPowerManagement.kext
PlatformUUID.kext
SleepEnabler.kext

 

Asus P5k deluxe wifi Ap

q6600 2.4ghz core 2 quad cpu (mildly overclocked to 3.2, FSB 800 x 9)

4x2gb sticks of ddr2 1066ghz ram (timed at 5-5-5-12)

 

using bios 1005

power management bios screen,

s3 enabled

cpu config bios screen

execute disabled bit is enabled

everything else disabled

onboard devices

firewire enabled

hd audio enabled

marvell yukon ethernet (used only because some software uses en0 to generate auth id specific to my mac)

realtek disabled

serial port disabled

 

 

here is my send me.zip

send_me.zip

 

 

IN my ideal scenario, i would like to have as much native as possible, with full sleep/restart/shutdown. currently i have null cpu powermanagement as well. I use my hackintosh for an audio recording rig. When i was a windows kid, it was recomended to disable speedstep to ensure consistent processor power to the apps. In mac it may be different though. Is there a possibility of losing performace by using native power management? Can you enable native power management without using speedstep? I was told from a reputable source that speedstep makes overclocks unstable. I use water cooling in my rig and normally run my chip at 3.6ghz. temps of 40 degrees on idle and 60 on max load. problem was caused a few kinks in protools so i went to a much milder overclock.

 

If i can use native power management without speedstep to be able to represent my temps more accurately, that would be awesome.

 

can you point me to how to properly patch either voodoohda or applehda for my mobo's codec as well? I don't even know how to determine what that is as i keep reading conflicting posts.

 

i have a pny geforce 9800gt ee (since it is an "energy efficient" non-reference video card, it is actually capable of less than a normal 9800gt card as it is intentionally underclocked and runs on less power (the card has no secondary power connector, just gets power from pcie slot) as a result i think i am getting artifacts in certain apps when using graphics enabler and chameleon rc5 because it is recognized as a normal 9800gt. I have the actual rom bios of my card, at least i think (it was given to me from another user). would it be better to load my cards bios using chameleon, or instead add specific dsdt edits suited for my video card? If so, how do i figure out how to edit dsdt for my card? If you can point me to some information i would be very grateful.

 

10de_0614.rom.zip

 

Try as I might, my right sided brain has a lot of trouble with dsdt editing. EVerytime i have tried, i have managed to panic my dang system. You being so generous with your time, i had hoped you might help me too. :-)

 

Your amigo

 

Mac and CHeese

 

god bless you! :-)

 

i know this is a lot. I'm sorry, i didn't want to miss anything.

 

also, i have no idea how to set up slices version of fakesmc with the plugins and what not. i would after all is said and done also be able to monitor fan speed, gpu temp, etc etc. but first things first (unless you know how and want to be my best friend and show me :-)

Link to comment
Share on other sites
filosofem
filosofem
Posted
Posted
see the first post

NativePowerManagement

 

Gee! Now it works and temperatures decreased about 10 celsius degrees. Is that normal?

AppleIntelCPUPowerManagementClient: ready

 

CPU 0 die temp 22

CPU 1 die temp 18

CPU 2 die temp 18

CPU 3 die temp 20

GPU die temp 51

Non Apple GPU frequency 669

CPU heatsink temp 23

Northbridge temp 28

CPU 0 Vcore voltage 1.262

CPU 0 frequency 1596

CPU 1 frequency 1596

CPU 2 frequency 1596

CPU 3 frequency 1596

 

Thanks a lot!

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Hello MaLd0n

 

you need these three kexts

AHCIPortInjector.kext

fakesmc.kext

LegacyIOAHCIBlockStorage.kext

 

+

 

DSDT

dsdt.Macandcheese.zip

 

+

 

add in boot.plist

 

<key>GeneratePStates</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>

 

use Chameleon RC5

http://www.insanelymac.com/forum/index.php...t&p=1634096

 

Gee! Now it works and temperatures decreased about 10 celsius degrees. Is that normal?

AppleIntelCPUPowerManagementClient: ready

 

Yep

:D

 

Shutdown/Sleep still f*cked.

 

send me a kextstat

 

Yes, it works perfectly

:)

 

 

@tungmeister

 

dsdt.tungmeister.zip

Link to comment
Share on other sites
manmal
manmal
Posted
Posted
you need to do some tests

read too

DSDT nothing is so easy

I never had this problem

 

hi maldon, i didn't solve anything yet of my problems (acer 7720g) sleep and audio with applehda. I attached audiocodec dump from linux at my previous post at previous pages...

 

link: http://www.insanelymac.com/forum/index.php...t&p=1636174

 

Any news? Is anyone capable of building a proper LegacyHDA for the codecdump i provided?

Thanks, really!!

Link to comment
Share on other sites
verleihnix
verleihnix
Posted
Posted
dsdt.verleihnix.zip

 

DTGP

IRQs

LPC

REMOVE

RENAME

SMBUS

SHUTDOWN

HPET

FIX WARNING

 

ich7 need not fix usb

 

 

Hi MaLd0n,

 

shutdown, restart, speed stepping are working fine.

Vcore looks like it doesn't change.

Do you have any idea?

verleihnix

 

 

Edit: It changes, but most of the time it is at highest level.

d946gzis.verleihnix_send_me.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
OK, thanks for your time anyway. :( I will try to figure it out but i don't think i will get somewhere.

 

if you find a solution

share with us

:D

 

try it

 

Method (_PTS, 1, NotSerialized)
{
	Or (Arg0, 0xF0, Local0)
	Store (Local0, DBG1)
	OSTP ()
	If (LEqual (Arg0, One)) {}
	If (LEqual (Arg0, 0x03)) {}
	If (LEqual (Arg0, 0x05))
	{
		Store (Zero, SLPE)
		Sleep (0x10)
	}

	If (LEqual (Arg0, 0x04))
	{
		If (LNot (PICF))
		{
			Sleep (0x64)
		}
	}

 

remove operation region(LPCB)

 

OperationRegion (LPC0, PCI_Config, 0xA4, 0x02)
			Field (LPC0, ByteAcc, NoLock, Preserve)
			{
				AG3E,   1
			}

 

hi maldon, i didn't solve anything yet of my problems (acer 7720g) sleep and audio with applehda. I attached audiocodec dump from linux at my previous post at previous pages...

Any news? Is anyone capable of building a proper LegacyHDA for the codecdump i provided?

Thanks, really!!

 

I really do not know :D

 

Hi MaLd0n,

 

shutdown, restart, speed stepping are working fine.

Vcore looks like it doesn't change.

Do you have any idea?

verleihnix

 

 

Edit: It changes, but most of the time it is at highest level.

 

Native PM --> Chameleon RC5 :D

 

Hi MaLd0n,

i modified my DSDT to get native power management.

see http://www.insanelymac.com/forum/index.php?showtopic=246639

Is it possible to get also sleep working?

 

you have fixed the USB?

I would like to find a fix DSDT

kext should be a good way

:)

 

could you tell me what changes you've made?

 

compare the two

;)

Link to comment
Share on other sites
iLeopod
iLeopod
Posted
Posted
...Any news? Is anyone capable of building a proper LegacyHDA for the codecdump i provided?

Thanks, really!!

try if removing BuiltInHDA and PreservePinConfigurations helps

and use 10.6.2 AppleHDA

@MaLd0n

No, I haven't t fixed USB yet.

Nforce DSDTs examples are rare.

 

I'm not sure what the Apple style name for USB0 / USB2 is. UHC1 and UHC2?

Should i delete everything in the Device(USB*) part or should i just add a method?

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...