Jump to content

ATi HD5000 BootLoader !

Mohamed Khairy

By Mohamed Khairy,
in ATi

 Share
302 posts in this topic

Recommended Posts

pootul
pootul
Posted
Posted

I've got Kabyl's /boot file, and none of framebuffers work. I think it might be related, however, to the fact that I have a built-in graphics that I can't really disable. (I'm running my ATI card as my primary display). When I do Wait=yes -v, I get the following:

 

Using PCI-Root-UID value: 0
Intel VGA Controller [8086:a001] :: PciRoot(0x0)/Pci(0x2,0x0) (currently NOT SUPPORTED)
Unsupported card!

And no mention of the framebuffer at all. Is there a way to force it to use the ATI card?

Link to comment
Share on other sites
FabriXXio
FabriXXio
Posted
Posted

I've a problem. :(:(:(

Replacing the boot file my computer, after loading the apple, restart :(:(

This happens for every boot file..

 

please help me..

I also tried: Kabyl's /boot file with flag AtiFb .. but :( ..i've black screen...

 

 

;):):):P :censored2: :censored2: :censored2: :censored2: :censored2: :censored2:

this's my IOreg without ATI5000Controller, and 3000 beacuse without these mac starts

this's System Profiler:

-PCI-

ATI Radeon HD 4890

Nome: ATY,Motmot

Tipo: display

Driver installato: Sì

Bus: PCI

Slot: Slot-1

ID fornitore: 0x1002

ID dispositivo: 0x68b8

ID fornitore sottosistema: 0x1002

ID sottosistema: 0x2543

ID revisione: 0x0000

Ampiezza link: x8

Velocità collegamento: 2.5 GT/s

 

-Graphics\Monitor-

Modello Chipset: ATI Radeon HD 4890

Tipo: GPU

Bus: PCIe

Slot: Slot-1

Larghezza Lane PCIe: x8

VRAM (totale): 256 MB

Fornitore: ATI (0x1002)

ID dispositivo: 0x68b8

ID revisione: 0x0000

Revisione ROM: 113-B7710C-176

Versione driver EFI: 01.00.318

Monitor:

Monitor:

Risoluzione: 1024 x 768

Profondità pixel: Colore 32 bit (ARGB8888)

Monitor principale: Sì

Mirror: Spento

Online: Sì

 

..but i've Sapphire ATI Radeon HD 5770 :(

 

Help Me! (sorry 4 my English)

 

My IOReg

Link to comment
Share on other sites
pootul
pootul
Posted
Posted

I've switched to the drivers from 10.6.5 beta, and I'm no longer getting the kernel panic. I'm only half way through the frame buffers, however, and so far I never get anything after the line 'Login Window Application Started'

 

I've got Kabyl's /boot file, and none of framebuffers work. I think it might be related, however, to the fact that I have a built-in graphics that I can't really disable. (I'm running my ATI card as my primary display). When I do Wait=yes -v, I get the following:

 

Using PCI-Root-UID value: 0
Intel VGA Controller [8086:a001] :: PciRoot(0x0)/Pci(0x2,0x0) (currently NOT SUPPORTED)
Unsupported card!

And no mention of the framebuffer at all. Is there a way to force it to use the ATI card?

 

 

I'm still hung up on this... Is there any way to make sure the injector uses the correct video card?

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
I've switched to the drivers from 10.6.5 beta, and I'm no longer getting the kernel panic. I'm only half way through the frame buffers, however, and so far I never get anything after the line 'Login Window Application Started'

 

 

 

 

I'm still hung up on this... Is there any way to make sure the injector uses the correct video card?

 

 

what is your hardware

Link to comment
Share on other sites
pootul
pootul
Posted
Posted
any way i need from you to run

 

i need from you to know the name to know what is the sitaution of gfxs

 

so if you have ubuntu

 

run teriminal and type

 

lspci -nn

 

and copy details here

 

 

This is the state of things when I tell the BIOS to run the onboard video first (from Mac). I'll reboot to ubuntu in just a minute:

 

$ sudo lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a002] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Cedar PRO [Radeon HD 5450] [1002:68f9]
01:00.1 Audio device [0403]: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] [1002:aa68]
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
This is the state of things when I tell the BIOS to run the onboard video first (from Mac). I'll reboot to ubuntu in just a minute:

 

$ sudo lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a002] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Cedar PRO [Radeon HD 5450] [1002:68f9]
01:00.1 Audio device [0403]: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] [1002:aa68]
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]

 

 

i send to you my mail

Link to comment
Share on other sites
pootul
pootul
Posted
Posted
This is the state of things when I tell the BIOS to run the onboard video first (from Mac). I'll reboot to ubuntu in just a minute:

 

$ sudo lspci -nn

...snip...

 

I just ran it under ubuntu and get the same results, even with the Radeon set to load up first in BIOS

Link to comment
Share on other sites
PGHammer
PGHammer
Posted
Posted
>>> same result :) to fix it you need both dvi to be connected to display.

 

But I need to swap my div ports every time I boot, if not i'm black screen after apple boot.

Hdmi is working fine.

I'm using Vervet bootloader.

 

I have the VisionTek 512 MB (not 1 GB) version (DVI/HDMI/VGA) with the same ID (1002:68F9). Same bootfile and AtiFb=Vervet. 10.6.5 combo update (includes Graphics Update 1.0) has been applied. First off - no Kitchen Pitchin (the first time I've managed that) either prior to, or since, the mods to ATI5000Controller.kext (the device ID is not in the list for this kext; I had to add it manually). DVI and HDMI ports are connected (D-sub isn't, as it won't work if DVI and HDMI are connected), and either works just fine (in fact, I switched from one to the other while entering this); however, I'm back to 1024x768. I'm going to try Uakari next (however, I know that Vervet works as a fallback).

 

No change with Uakari (instead of Vervet); however, that also includes no Kitchen Pitchin, either.

 

chinese_spy; I take it you are in the same situation (or have you actually managed to get it to work)?

Link to comment
Share on other sites
surrealillusion
surrealillusion
Posted
Posted

I'm getting as far as:

 

 

 

** Device in slot: SLOT--1 **

 

which shows up 3 times and the computer does not continue booting. This is using kaybl's bootloader file with Chameleon RC5 from Oct 25th. Anyone have any idea what could be causing it to hang right there? Unfortunately verbose mode isnt giving me much to work with and searches don't turn up very much.

 

My system specs are as follows:

 

Gigabyte EP45-UD3P v1.6 (Cartri 0.8 bios)

Intel Q8400

Gigabyte SOC 5770 (both DVI work OOB, return from sleep causes artifacts, HDMI and DP not working in OSX currently)

Link to comment
Share on other sites
FKA
FKA
Posted
Posted
I'm getting as far as:

 

 

 

** Device in slot: SLOT--1 **

 

which shows up 3 times and the computer does not continue booting. This is using kaybl's bootloader file with Chameleon RC5 from Oct 25th. Anyone have any idea what could be causing it to hang right there? Unfortunately verbose mode isnt giving me much to work with and searches don't turn up very much.

 

My system specs are as follows:

 

Gigabyte EP45-UD3P v1.6 (Cartri 0.8 bios)

Intel Q8400

Gigabyte SOC 5770 (both DVI work OOB, return from sleep causes artifacts, HDMI and DP not working in OSX currently)

Are you sure the boot sequence doesn't finnish and what you see is just a freeze of the last frame of video posted? can you VNC into the machine?

 

try without UseATiROM in boot plist - if you have it there! and also check you don't have VBIOS=No

VBIOS=Yes is default.

 

D

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
I'm getting as far as:

 

 

 

** Device in slot: SLOT--1 **

 

which shows up 3 times and the computer does not continue booting. This is using kaybl's bootloader file with Chameleon RC5 from Oct 25th. Anyone have any idea what could be causing it to hang right there? Unfortunately verbose mode isnt giving me much to work with and searches don't turn up very much.

 

My system specs are as follows:

 

Gigabyte EP45-UD3P v1.6 (Cartri 0.8 bios)

Intel Q8400

Gigabyte SOC 5770 (both DVI work OOB, return from sleep causes artifacts, HDMI and DP not working in OSX currently)

 

can you do pfix from terminal of installer

some times when there are no caches it load all kexts and end with Device in slot............

 

hope it works for you

Link to comment
Share on other sites
surrealillusion
surrealillusion
Posted
Posted
can you do pfix from terminal of installer

some times when there are no caches it load all kexts and end with Device in slot............

 

hope it works for you

 

 

You'll have to bear with me I haven't followed the scene in a while (after I got my first hackintosh running smoothly I stopped messing around with DSDT editing etc. What are you referring to when you mention pfix?

 

Are you sure the boot sequence doesn't finnish and what you see is just a freeze of the last frame of video posted? can you VNC into the machine?

 

try without UseATiROM in boot plist - if you have it there! and also check you don't have VBIOS=No

VBIOS=Yes is default.

 

D

 

 

well normally after that message the screens should go blank as OSX goes to load the gui (it does when I have use the boot cd). I haven't tried VNC'ing into the machine but my hunch is that the issue is with trying to get the gui going

 

my boot.plist file is pretty much empty right now.

 

If it makes it interesting at all, I used a SL retail install disc, proceeded to drop the 10.6.5 combo update and using Cartri's boot CD and the recommended version of Cham I can boot to a desktop with both DVI displays. My two focuses are trying to identify the issue with not being able to use the DP as a 3rd display, and having a corrrupted display when coming back from sleep.

 

 

 

You'll have to bear with me I haven't followed the scene in a while (after I got my first hackintosh running smoothly I stopped messing around with DSDT editing etc. What are you referring to when you mention pfix?

 

 

 

 

well normally after that message the screens should go blank as OSX goes to load the gui (it does when I have use the boot cd). I haven't tried VNC'ing into the machine but my hunch is that the issue is with trying to get the gui going

 

my boot.plist file is pretty much empty right now.

 

If it makes it interesting at all, I used a SL retail install disc, proceeded to drop the 10.6.5 combo update and using Cartri's boot CD and the recommended version of Cham I can boot to a desktop with both DVI displays. My two focuses are trying to identify the issue with not being able to use the DP as a 3rd display, and having a corrrupted display when coming back from sleep.

 

 

Good call with using VNC, I am able to see the desktop so it's definately an issue dropping Kaybl's boot.gzip file onto the root of the drive. If I restore Cartri's bios I can boot to the desktop. What I noticed when checking the Graphics/Displays my card is no longer detected properly. I will try some of the other bl's but there were two ppl in the Gigabyte Mac bios that were saying they had success using Kaybl's bl with Cham

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...